präsentiert von
1
ACKNOWLEDGEMENTS
To the almighty God who granted me the strength, enthusiasm and perseverance to undertake this
study, I say thank you, Lord.
The immense contributions of my supervisor, Dr. A. Singh-Pillay and co-supervisor, Mr M.P.
Moodley, cannot be over emphasised. In the form of guided thinking and motivation, you kept me
going. I deeply acknowledge your hard work around the clock to ensure the timeous completion
of this research. Your commendable supervisory roles cannot go unmentioned.
To my late grandmother for the words you said to strengthen me at the time I needed them the
most (to put the pieces back together and soldier on). Those words still keep me going.
With much appreciation I acknowledge the support and love of Miss Lebala Miriam Kolobe for
being with me every step of the way. May you be rewarded many fold.
This study would not have been a success without the willing contributions of the participants. I
salute you all for devoting some time out of your tight schedules towards the success of this study.
To my colleagues in the Masters programme, I thank you all for the useful discussions
I acknowledge the co-operation and support of my principal, Mr A.S. Dlamini and his two deputies
Mr Sakhile Mngomezulu and Mr Frank Khumalo, as well as the entire management of Kwasanti
secondary school, for granting me the permission to collect the data for this study from the nearby
schools during my free periods. Thank you also for your support in all these years.
And last but not least, to the principals of the participating schools, I say thank you; your tolerance
is deeply acknowledged and appreciated.
2
ABSTRACT
The design process undergirds technology education and therefore it is quintessential to the
teaching, learning and assessment of technology education. Since the introduction of technology
education into the South African curriculum, there has been a series of changes that teachers have
had to contend with: C2005, RNCS and now the NCS-CAPS. In the CAPS technology policy there
has been a (re)-presentation of the design process from a linear to nonlinear. This (re)presentation
of the design process has led to uncertainties amongst teachers of technology in terms of how the
teaching of the design process should unfold.
This study therefore explores grade 9 technology teachers' views of the design process and how
these views influence their teaching of the design process. Shulman's Pedagogical Content
Knowledge (PCK) model (1986), the Argyris and Schön (1974) notion of "espoused theory" and
"theory in use", and Singh-Pillay's (2010) notion of interface have been used to frame the research.
A qualitative case study approach was used. Purposive and convenience sampling were used to
obtain the respondents for this study. An open ended questionnaire, semi-structured interviews,
observation of lessons and post-observation interviews were used to collect data.
The study occurs in the Chatsworth West ward in Durban, KwaZulu Natal. The findings indicate
that grade 9 technology teachers hold two core views of the design process, namely: design process
as problem-solving and design process as a step-by-step process that provides "comfort" to
learners during problem-solving. The findings indicate that teachers' views of the design process
are an amalgam of their diverse qualification in technology education, their pedagogical content
knowledge, their previous teaching experience, their training and (re)training and existing support
in the school ecosystem. Thus, it is concluded that the PCK of the technology teacher influences
how they teach the design process to their learners. It is recommended that if the non-linear
approach of problem-solving in the design process is to be adhered to then there is the need for
3
the retraining and reskilling of technology teachers and that teacher education should also focus
more on the development of the PCK of future teachers.
Key words: design process; non-linear model; teacher development; technology education
4
CONTENTS
Acknowledgements ... 1
Abstract ... 2
Contents ... 4
Abbreviations ... 7
LIST OF TABLES AND GRAPHS ... 7
CHAPTER 1 BACKGROUND AND EDUCATIONAL CONTEXT ... 8
1.1 INTRODUCTION AND BACKGROUND ... 8
1.2 PURPOSE OF THIS STUDY ... 10
1.3 RATIONALE ... 10
1.4 SIGNIFICANCE OF THE STUDY ... 11
1.5 LIMITATIONS ... 11
1.6 OVERVIEW OF THE STUDY ... 11
1.7 CHAPTER SUMMARY ... 13
CHAPTER 2 Literature review and theoretical framework ... 14
2.1 Introduction ... 14
2.2 The Design Process and its (re)presentation ... 14
2.2.1 The design process: What is it? ... 14
2.2.2 How the design process is re (presented)? ... 15
2.2.3 Views of scholars on the nature of the design process ... 16
2.2.4 Learner autonomy ... 22
2.3 Conceptual framework ... 23
2.3.1 Constructivist Epistemology ... 23
2.3.2 Conceptualizing Pedagogical Content Knowledge ... 24
2.3.3 Espoused theory and theory in use ... 32
2.3.4 Interface ... 32
2.4 CHAPTER SUMMARY ... 33
CHAPTER 3 METHODOLOGY ... 34
3.1 Introduction ... 34
3.2. Philosophical assumptions underpinning this study ... 34
3.2.1 Why this study involves qualitative data ... 34
3.2.2 Reasons for using a case study approach for the study ... 35
3.3 LOCATION OF THIS STUDY ... 37
3.4 Data collection methods ... 37
3.4.1 Gaining access... 38
3.4.2 Instruments ... 39
3.4.3 Sampling ... 41
5
3.4.4 Data Collection Plan ... 42
3.4.5 Data analysis method ... 46
3.4.6 Credibility and Trustworthiness ... 47
3.5 Chapter summary ... 48
CHAPTER 4 Presentation of findings and analysis ... 50
4.1 INTRODUCTION ... 50
4.2. PART A ... 50
4.2.1 Analysis of data ... 50
4.3.1 Lesson observation T5 ... 58
4.3.2 Lesson observation T8 ... 65
4.3.3 Answering research question 2 ... 70
4.4 Chapter summary ... 72
CHAPTER 5 CONCLUSIONS AND RECOMMENDATIONS ... 73
5.1 Introduction ... 73
5.2 Implications OF this study ... 74
5.2.1 Reflective practice ... 74
5.2.2 Professional development ... 75
5.2.3 Resourcefulness ... 75
5.2.4 Learner autonomy/ creativity ... 76
5.2.5 Collaborative learning and problem-solving ... 76
5.3 Recommendations ... 76
5.3.1 Curriculum design and implementation ... 77
5.3.2 Teacher interference ... 77
5.3.3 Professional development ... 77
5.3.4 Designing in groups ... 78
5.4 Limitations of the study ... 78
5.5 RECOMMENDATIONS FOR Further research ... 79
5.6. Conclusion ... 79
REFERENCES ... 81
Appendix 1: Participants' informed consent ... 88
Appendix 2: Survey Questionnaire ... 90
Appendix 3: Semi-structured interview ... 92
Appendix 4: Table of Analysis for Questionnaire ... 94
Appendix 5: Table of analysis for semi-structured interview ... 99
5a. ... 104
5c. ... 105
5d... 106
5e. ... 107
6
5f. ... 107
5g... 108
Appendix 6: Transcript of post observation interview ... 109
Appendix 7: Table of analysis of post observation interview ... 120
7
ABBREVIATIONS
C2005
Curriculum 2005
CAPS
Curriculum Assessment and Policy Statement
DBE
Department of Basic Education
DoE
Department of Education
DP
Design Process
FET
Further Education and Training
NCS
National Curriculum Statement
PCK
Pedagogical Content Knowledge
RNCS
Revised National Curriculum Statement
TLA
Technology Learning Area
LIST OF TABLES AND GRAPHS
Table 3.1: The phases of data collection, instruments used and the purpose of each phase ... 42
Graph 4.1: Technology teachers' qualifications ... 51
Graph 4.2: Depicting Teacher age, years of teaching and years teaching technology ... 52
Graph 4.3: Depicting gender distribution of teachers ... 52
LIST OF FIGURES
Figure 2.1: `Spinning top' model for pedagogical content knowledge
Figure 2.2: Developmental model of pedagogical content knowing (PCK)
Figure 2.3: Gess-Newsome's model of PCK
Figure 2.4: A transformative model of PCK
Figure 2.5: Components of PCK
8
CHAPTER 1
BACKGROUND AND EDUCATIONAL CONTEXT
1.1 INTRODUCTION AND BACKGROUND
The main reason technology education was introduced in the South African national curriculum,
in 1998, was the recognition of the need to produce engineers, technicians and artisans needed in
modern society as well as the need to develop a technologically literate society for the modern
world (Lewis, 2006). The design process is the backbone of technology education and is used as
a structure to deliver all the learning aims of technology education. The subject stimulates learners
to be innovative and develops their creative and critical thinking skills. It teaches learners to
manage time and material resources effectively, provide opportunities for collaborative learning
and nurtures teamwork. These skills provide a solid foundation for several Further Education and
Training (FET) subjects as well as for the world of work. According to the CAPS policy document
(D.O.E., 2011) Technology as a subject contributes towards learners' technological literacy by
giving them opportunities to:
· Develop and apply specific design skills to solve technological problems,
· Understand the concepts and knowledge used in Technology education and use them
responsibly and purposefully,
· Appreciate the interaction between people's values and attitudes, technology, society and the
environment,
The intention is to introduce learners to the basics needed in Civil Technology, Mechanical
Technology, Electrical Technology and Engineering Graphics and Design. Additionally, learners
gain an idea of the way engineers apply scientific principles to practical problems. In addition,
evaluation skills will be fostered and the introduction of product design and production will be
useful in other FET subjects that use these skills.
Technology will teach learners the opportunity to learn:
· To solve problems in creative ways;
· To use authentic contexts rooted in real situations outside the classroom;
· To combine thinking and doing in a way that links abstract concepts to concrete understanding;
· To evaluate existing products and processes; and to evaluate their own products;
· To use and engage with knowledge in a purposeful way;
9
· To deal with inclusivity, human rights, social and environmental issues in their tasks;
· To use a variety of life skills in authentic contexts (such as decision making, critical and
creative thinking, cooperation, problem-solving and needs identification);
· While creating positive attitudes, perceptions and aspirations towards technology-based
careers; and
·
To work collaboratively with others:
It is obvious that if technology education is introduced as a completely new learning area (subject)
in the curriculum of any country, it will engender the need for extensive in-service teacher training
(Potgieter, 2004). The implementation of Technology Education within the school curriculum has
been a hurdle for both teachers and learners (Pudi, 2007). With regard to the foregoing discussion,
it is important to remember there were no teachers qualified to teach technology at the time of its
implementation in 1998. Teachers qualified in other subjects were asked to volunteer to teach
technology. The advent of technology education, nationally and internationally, has posed
challenges different from those experienced in regard to other learning areas, contends (Rauscher,
2010). The successful implementation of the technology curriculum is dependent on teachers
having a solidly established personal construct of technology equivalent to that of the curriculum
(Tholo, Monobe, & Lumadi, 2011). Studies by Singh-Pillay (2010) and Carrim (2004) elucidate
the uncertainties teachers encounter during policy reform in terms of their pedagogical practice.
Ever since the introduction of technology education, the teachers are still grappling with its
pedagogy and didactics. The Technology Learning Area (TLA) needs skilled teachers. It is
poignant to disclose that 99% of the teachers teaching technology had little or no qualification to
teach the subject before the year 2010 (Lovington, 2009; Nkosi, 2008)
In respect of teacher training, it is significant to note that only few technology teachers have
received formal training thus far. This being the case, it should equally be noted, that technology
teacher training has not been easy or clear (DoE, 2009). Teachers were asked to volunteer to teach
technology for the first time. According to Reitsma and Mentz (2009), short workshops by the
DoE do not offer teachers the opportunity to study and reflect on the new information. The difficult
situation seems compounded by the under-qualified and inexperienced educational officials who
also give the training as (Reitsma & Mentz) found out: "Only few of the subject advisors
themselves, who acted as trainers, had training in technology education". However, it is not even
clear from the Curriculum Review Report (DoE, 2009) as to who will now be expected to teach
Technology will it be Science teachers, Technology teachers, or a team of Science and
Technology teachers? In a recently completed doctoral study, Mapotse (2012) conducted an action
10
research with 18 technology teachers from selected secondary schools in Limpopo Province.
Through observations and fact-finding, he discovered that some teachers in whose schools his
student teachers were placed for practice teaching, could not teach technology to the point that
student teachers changed roles with them, i.e. student teachers ended up mentoring their
mentor/senior teachers. In the sampled schools, Mapotse found that 11 teachers had less than 6
years' experience teaching technology, 11 teachers had no qualification in technology education,
and 8 teachers could not plan a technology lesson at all. This means, these teachers had no idea of
the design process which is fundamental to technology nor did they use it to structure their
technology lessons.
1.2 PURPOSE OF THIS STUDY
The purpose of this study is to explore grade 9 technology teachers' views of the design
process and its influence on their teaching of the design process. This purpose can be achieved
by:
· Ascertaining teachers' views of the design process in technology education; and
· Establishing if any relationships exists between teachers' views of the design process, and
their teaching style.
There are two critical questions guiding the study. These are:
· What are Gr 9 technology teachers' views of the design process?
· How do these views influence their teaching of the design process?
1.3 RATIONALE
I am and have been a technology teacher for the past 8 years in the Umlazi District. Since the
introduction of technology education into the curriculum teachers have been bombarded with the
following policies namely: Curriculum 2005 (C2005), Revised National Curriculum Statement
(RNCS) and now the National Curriculum Statement Continuous Assessment Policy Statement
(NCS-CAPS). As a teacher of technology education in preparation for implementation of the
NCS-CAPS policy, I received training from subject advisors via the once-off cascade model
which lasted 4 days. I am intrigued by first, the change in the (re)-presentation of the design
process from a linear to nonlinear representation in the CAPS document and second by the
policy's vision for the teachers. Hence I want to explore Grade 9 technology teachers' views of
the design process in Chatsworth West ward within the Chatsworth circuit and its influence on
their teaching of the design process. Research by Richmond and Anderson (2003) show how
11
important the views of teachers are when it comes to reform in education whilst a study by Zipf
and Harrison (2003) indicates that teachers' views can act as filters through which new
knowledge and experiences are screened for meaning. Furthermore, a literature survey revealed
that only 8.6 per cent of the 199 research studies conducted in technology education were design-
related (Johnson & Daughterty, 2008). It stands to reason that not much is known about the link
between teachers' views of the design process and how these views influence their teaching of
the design process. Therefore it becomes imperative to embark on this study in order to
understand the relationship between teachers' views of the design process and their teaching
style.
1.4 SIGNIFICANCE OF THE STUDY
This study will be beneficial to technology subject advisors and technology curriculum developers
because it will provide a deeper insight into teachers' views of the design process and its impact
on their teaching style. The findings for this study will help technology teachers to engage in
reflective practice in respect of their enactment of and engagement with the design process, and
this could contribute to a more nuanced practice. The teachers in this study are representative of
many other dedicated technology teachers in South Africa, and their respective schools are just a
few of many similar schools. Although this case study cannot be generalized to all classrooms,
there are commonalities between this case and many similar classrooms in South Africa: the
training that teachers received for the implementation of the technology curriculum is similar to
that of many teachers in South Africa; the contextual constraints that they experienced are not
unique to their schools, and the pressure of the examination is the same in all public schools in
this country.
1.5 LIMITATIONS
Major limiting factors of the study were participant drop-out, and time constraints leading to the
observation of insufficient number of lessons. The findings of this case study cannot be
generalized to all classrooms.
1.6 OVERVIEW OF THE STUDY
This research report is presented in five chapters.
Chapter 1 describes the background and the educational context within which the research was
conducted. Also outlined in chapter one is the purpose of the study, the critical questions guiding
12
the study, rationale as well as the significance. This chapter is closed with a brief description of
the delimitations of the study and a conclusion.
Chapter 2 presents a detailed review of relevant literature on the design process. In chapter two
the conceptual framework of this study is presented. The conceptual framework is an synthesis
of Shulman's (1986) model of Pedagogical Content Knowledge (PCK), Argyris and Schön's
(1974) idea of espoused theory and theory in use and Singh-Pillay's (2010) notion of interface.
Chapter 3 explores the philosophical assumptions underpinning this study and explains why this
study adopts a qualitative approach as well as why a case study approach is used. The research
site and the data collection method employed in the study are also described. The chapter also
gives an account of how various gatekeepers at each stage of the research were approached in
order to gain access and also outlines the hustle encountered by the researcher during the data
collection phase of the research. The data collection instruments as well as the sampling
procedure used in the study are described. This is followed by the description of data collection
procedure and the method of data analysis. The chapter ends with the description of the validity
and reliability of the instruments.
Chapter 4 aims to present the finding and analysis of data to answer the two research questions
that guide the study, namely, "What are Gr 9 technology teachers' views of the design process?"
and "How do these views influence their teaching of the design process?". This chapter is divided
into two parts (part A and part B). Part A aims to answer the first research question whilst part
B attempts to answer the second research question. In answering research question 1, two core
views arose in respect of teachers' view of the design process, namely, design process as
problem-solving and design process as a step-by-step process that provides comfort to learners.
The data from the questionnaire and semi-structured interview were used to answer research
question one. To answer the second research question data from observation of lesson and post-
observation interview were used. In answering research question two, the following
manifestation of PCK were interrogated, namely, instructional strategy, knowledge of
technology curriculum and use of explanation, use of assessment strategies, knowledge of
learners understanding. Teacher 5's (T5) espoused theory (view) of the design process is
congruent to her theory in use (practice in respect of the design process) whilst these is a huge
miss match between T8's espoused view of design process and his actual theory in practice.
In chapter 5 the findings are discussed. This chapter also discusses the recommendations relating
to the findings and reflections. Limitations of the study together with suggested areas for further
research are also highlighted before the chapter is concluded.
13
1.7 CHAPTER SUMMARY
This chapter provided a brief account of the study. It presented a summary of how the research
was conducted by outlining the background of the research as well as the educational context
within which the study was conducted. The chapter highlighted the focus, significance and the
critical questions of the study.
14
CHAPTER 2
LITERATURE REVIEW AND THEORETICAL FRAMEWORK
2.1 INTRODUCTION
This chapter presents a review of literature and the conceptual framework pertinent to the purpose
of this study. The literature surveyed focuses first, on the design process as there are differing
perspectives amongst scholars as to how the design process should occur. Some scholars envisage
the design process as linear whilst other scholars see the design process as iterative. Second,
literature related to the teaching of the design process and pedagogical content knowledge
(Shulman, 1986) is reviewed to support my argument that teachers' views of the design process
influence their engagement and enactment of the design process. This is because what the teacher
does in class depends on the teacher's knowledge of the design process as well as the pedagogy
that is used to teach the design process. In this regard, it is worth noting that there is limited
research on teachers' views and involvement of the design process. Lastly Argyris and Schön's
(1974) notion of espoused theory and theory in use is presented as a conceptual framework for
this study to explore and understand the relationship between grade 9 technology teachers views
of the design process and its influence on their teaching of the design process.
2.2 THE DESIGN PROCESS AND ITS (RE)PRESENTATION
There are many perspectives amongst scholars of what the design process is and what it entails. It
is therefore necessary to review these differing perspectives.
Mioduser and Dagan (2007) maintain that for technology students to develop capabilities and skill
they need to engage with the design process. Therefore it is essential to examine what the design
process entails.
2.2.1 The design process: What is it?
The central role design plays in technology education is reiterated by Burghardt and Hacker (2004)
citing International Technology Education Association (ITEA) (2000, 2002) that "Design is
regarded as the core problem-solving process of technological development, it is as fundamental
to technology, as inquiry is to science and reading is to language arts" (p. 6-8). Mawson (2003)
considers the design process to be the concept/model that undergirds technology education. Jones,
Buntting, and De Vries (2011) concur with Mawson and maintain the design process forms the
core of the South African technology education curriculum just as it is in many other countries. It
is proffered by some scholars that the design process is a model that comprises various activities
15
or stages one has to go through in order to come out with solutions to achieve the aims of
technology.
According to the Curriculum Assessment and Policy Statement (CAPS) of the Department of
Basic Education of South Africa (DBE, 2011) Senior Phase Technology (Grades 7-9): the design
process allows learners to:
"Develop and apply specific design skills to solve technological problems; Understand the
concepts and knowledge used in Technology education and use them responsibly and
purposefully; Appreciate the interaction between peoples values and attitudes, technology, society
and the environment" (p. 9). Therefore it is a systematic approach to problem solving in
technology and is used to generate products, services, and systems to satisfy human needs and
desires (Smith & Gray, 2009). From the point mentioned above it stands to reason that in
Technology Education the term `design process' and `problem solving' are construed to be
synonymous. According to Mawson (2003), these concepts are similar, as they both have the same
sequence of activities, namely, the inception of an idea, the reflection stage and evaluation of the
success of the outcome.
According to the Department of Education (DoE, 2002), the technological process or the design
process are the activities that the learner engages in when identifying the need, investigating, and
designing, making evaluating and communicating solutions. The processes students use to create
solutions to technological problems are collectively referred to as the design process. Design
activities and learning offer students great opportunities to deal with complex design tasks within
original/real and meaningful learning (Kangas, Seitamaa-Hakkarainen, & Hakkarainen, 2013).
According to Pudi (2007), the design process (technological process) describes all that should take
place from the inception through development to the end of a technological activity, therefore it
is essential to know how the design process is represented if it is to be used to address or solve
technological problems/needs.
2.2.2 How the design process is re (presented)?
The CAPS senior phase technology document (DBE, 2011) describes the design process as a non-
linear process. The description of the design process in CAPS concurs with the Revised National
Curriculum Statement (RNCS) (DoE, 2002, p. 6) which conceptualises the design process as:
"A creative and interactive approach used to develop solutions to identified
problems or human needs".
16
It is worth noting that both curriculum statements identify the following five elements as
constitutive of the design process: investigate, design, make, evaluate and communicate
(Department of Education 2002, 2011), however, the diagrammatic (re) presentation of the design
process differs in the two policies. The RNCS has a linear diagrammatic (re)presentation of the
design process whilst the CAPS document has a cyclic diagrammatic (re)presentation of it.
Irrespective of the diagrammatic (re)presentation of the design process it must be emphasised from
the preceding discussion that both statements emphasise the iterative nature of this process. Both
policies leave no room for the design process to be misconstrued by readers or implementers of
the policy to be linear in nature, where the 5 stages must occur sequentially. Hence, it is necessary
to explore the scholar's views on the nature of the design, that is, how the design process should
unfold.
2.2.3 Views of scholars on the nature of the design process
According to Lawson (2006), the design process is regarded as a complex process and this stems
from its cyclical and iterative nature. Furthermore Lawson (2006) states that the process is not
linear, possible solutions come from a complex interaction between parallel refinements of the
design problem and ever-changing design ideas. A survey of literature has revealed that there are
two contrasting views in respect of how the design process should unfold. According to Williams
(2000) and Mawson (2003), a common view amongst teachers is the understanding of the design
process as a product based or a linear process. In other words, the design process is a series of
steps that are outlined by the teachers, viz. identify-design-make-appraise, and students are
expected to follow these steps sequentially and diligently in their projects. The ideology behind
this systematic process, Williams argues, is that it can be taught. This rigid procedure is inviting
to teachers, because it provides a structure for the teaching of Technology.
Scholars such as Hill (1998), Williams (2000), Mawson (2003) and Rowel (2004) argue that the
seemingly rigid nature of the design process does not provide enough room for developing the
creative skills of the learner and suggest the need for an alternative pedagogy or approach. In this
regard, Hill (1998) directs our attention to the disparity between the design process employed in
problem solving in real life contexts and that which is found in the classroom. As she puts it, "In
problem solving for real-life contexts, design processes are seen as creative, dynamic and iterative
processes that engage exploration; join conceptual and procedural knowledge-both thought and
action; and can encourage considerations to technology, human and environmental interactions.
The approach suggested by Hill (1998: p. 203) is antithetical to what is typically found in schools:
design, make and appraise cycles based on closed design briefs that are teacher assigned which
17
incidentally are unrelated to the students' world". As an alternative, innovative approach to teach
technology education, Hill suggested the need to interpret technology education as problem
solving for real life context that employs the design process as tools for creation and exploration.
In this regard, Flowers (2010) has argued that the multiplicity of design briefs that learners deploy
in their attempt to solve a particular design problem is indicative of the fact that technology
education encourages problem solving in diverse and creative ways as far as design related
problems are concerned. Furthermore, Flowers (2010) asserts that the complexity in design
problem solving requires a multifaceted approach in solving them. He likens his assertion to the
act of solving a simple problem vis-à-vis a complex problem. According to him (ibid.: p. 16), "A
problem of how to get your friend's attention can likely be solved in one step (such as "saying
your friend's name") but processes for solving environmental problems resulting from
overpopulation are complex, convoluted, and certainly not easy to solve with any single prescribed
method". A noteworthy observation made by , Flowers (2010: p. 16) is the dogmatism that is
prevalent in the curriculum, literature and research in technology education that has made the field
guilty of "dogmatically forwarding statements that seem to imply there exists only one problem-
solving process, or only one that is worth knowing in solving design-related problems" .
Hartfield (2012) extends the idea of the design process being nonlinear by reflecting on the terms
`design problems' and `design solutions'. Hartfield maintains that the "design problems" and
"designs solutions" are complementary components within the design process, they are mutually
related and thus go hand in hand. Furthermore, Hartfield (2012: p. 133) contends that both design
problems and design solutions evoke five sets of issues. These include:
"(i) the `over-accepted' assumption that design is problem-solving; (ii) the proposition
that, in significant ways, designing far exceeds problem-solving; (iii) the view that design
problems are inevitably `wicked' problems for which single or `set' solutions are not to be
expected; thus (iv) the realization that design outcomes are inescapably `satisficing'
solutions; and (v) the critical contention that, it is the designer who sets the problem rather
than simply `receiving' it".
Hartfield (2012) concludes his argument by reiterating the following sentiments:
· That designers as well as theorists influence contemporary practice and what the design
case/problem should be adding that contemporary practice as well as internally-persuasive
contemporary positions and theories also influence design.
· That the designer has no role if we sublimate design.
18
· That the designer is not merely asserted to be a problem receiver and/or the problem- solver,
but as "the agent who effectively determines the nature of the problem to be addressed the
problem-as-design goal and establishes the very formalization and solution-type that will
achieve this goal" (ibid.: p. 140).
Wong and Siu (2012) also suggests "The design model consists of 5 stages: situation, research
(which also contains activities like data collection, decision making, and evaluation), ideation,
development, and realization". It is also sometimes presented as a three-stage process consisting
of Analysis, Synthesis and Evaluation (Jones as cited in Wong & Siu). The three stages are
presented as a non-linear model emphasizing that design is continually evaluated through the three
stages. This means that return loops are sometimes included so that the designer can at any stage
of the design process go back to the previous stage for further analysis, synthesis or evaluation in
order to address any ambiguities that may have arisen during the design process (Lawson, 2006).
Wong and Siu (2012) have also cited the stages of the design process as outlined by Archer that
consist of programming, data collection, analysis, synthesis, development, and communication.
A contrasting view of how the design process should unfold is provided by scholars such as
(Hansen, 1993; Wong & Siu, 2012). These scholars have a totally different opinion in the discourse
relating to the dogma about problem solving. They believe that the one-way problem solving
approach is what makes things easy for students during problem solving in design.
Wong and Siu (2012) cite the defense advanced by four different writers: Aspelund (2006), Peto
(1999), Tunstall (2006) and Wise (1990) in support of the systematic nature of the design process
saying by making it more systematic, novice designers are capable of applying the suggested
procedures as they make their own designs. As Hansen (1993, p. 15) puts it, "It is quite a comfort
for students to discover that the problem solving process has a set of universal steps and that the
process involves the development of knowledge parallel to the one developed through, for
example, the scientific method". Flowers (2010) condemns Hansen's belief in this discourse.
Flowers posits construing problem solving as a set of universal steps is more likely to be a comfort
for teachers rather that learners as it assists teachers with the teaching of the design process. This
particular notion of problem solving protects us from having to question our assumptions and our
knowledge. It is in this regard that Flower (2010: p. 16), contends that one should not lose sight
of the fact that "we are not there for student or teacher comfort" and that associating "steps" in the
teaching of design and problem solving may be the crutch that teachers cling to due their
uneasiness and tension between their view of the design process and the pedagogy they use to
facilitate the design process.
19
Therefore Flowers (2010), Mawson (2003) and Lewis (2006) suggest that a solution to curing the
dogmatism that is associated with teaching design and problem-solving is to question our
assumptions even at the expense of our comfort and to explore alternative pedagogies.
This leads one to question the knowledge base (content and pedagogy) of technology teachers on
the design process. Research reports by Atkinson (2012) in the United Kingdom highlighted a
disjunction or mismatch between design process and its implementation with the reason being that
many teachers were not taught design in their training and that many teachers execute design and
technology education within a craft paradigm (Mittel & Penny, 1997 ; Zuga, 1989). This, Atkinson
said, has had a knock-on effect over the years due to the cyclical movement of knowledge from
teachers to pupils who in turn become teachers and lecturer who train tomorrow's generation of
teachers. This is true for practicing teachers in South Africa as well (Pool, Reitsma, & Mentz,
2013; Stevens, 2006). It has been indicated by Haynes (2010) that it is important for Technology
practitioners to have an understanding and expertise in the teaching of the design process.
However, in their research, Pool et al. (2013) as well as Stevens (2006) identified particular
shortcomings in the training of pre-service teachers as a result of the nature of the pre-service
training programme and found that university teacher educators in South Africa had different
views on the amount of depth of content knowledge a student teacher must gain so as to teach
technology effectively. They also found that the professional teaching and learning practices of
technology educators are based on approaches from other fields of knowledge and that no previous
teacher training programs existed for technology education. According to Pool et al. (2013: p.
465), to explain why technology teachers lack Pedagogical Content Knowledge (PCK), Shulman,
(1986) university teacher educators give explanations such as
"We do not get to pedagogy. It is a big shortcoming in our programme. 10 sessions where
you not only have to teach them the subject content but also how to teach the content. So
it is a massive burden really. Pedagogy is not subject specific. They are getting a lot of
pedagogy from their other subjects so one must be careful not to repeat things. They get
... PCK ... as a generic module in educational studies".
The consequences stated by Pool et al. (2013) are that technology teachers in South Africa lack
the requisite appropriate subject specific PCK to teach technology and for that matter the design
process which happens to be the backbone of technology education(Mawson, 2003). In other
words, university teacher educators emphasise content knowledge in their programmes but
overlook the pedagogy required to enact content knowledge in respect of the design process in the
classroom. It is worth noting that Pedagogical Content Knowledge (PCK) is a result of the
20
interaction of content and pedagogy. It is knowledge about the content that is derived from
consideration of how best to teach it. For a particular topic, it includes knowledge of:
(i) What makes the topic easy or difficult to understand including the preconceptions
about the topic that students bring to their studies;
(ii) Those strategies most likely to be effective in reorganizing students' understanding to
eliminate their misconceptions;
(iii) A variety of effective means of representing the ideas included in the topic analogies,
illustrations, examples, explanations, and demonstrations (Shulman, 1986: pp. 9-10).
A study by Potgieter (2012) alerts us to the trends amongst the strategies and methods that are
used to teach and apply the design process in technology education within the South African
context. According to his findings, the design process is mostly taught in a rigid manner in line
with the findings of Rowel (2004), Mawson (2003), Williams (2000), and Hill (1998) in other
parts of the world. Potgieter (2012: p. 964) established that while many teachers create room for
the design process to be interpreted differently; most teachers believe that "the steps in the design
process should be followed in a particular order" and that the prescription of the curriculum should
be closely adhered to.
For learners to play an active role in meeting the demands of the 21
st
century, (Atkinson &
Sandwith, 2014) suggest that all teachers should aim at enabling pupils in schools to develop and
enhance such human qualities as higher-order thinking and problem solving. Research by Bailey
(2012) and Atkinson (2011) have, however, shown that teachers of Design and Technology (D&T)
do not have what it takes to help pupils in this regard. This is due to lack of confidence on the part
of teachers in their own D&T abilities (Bailey, 2012) and that teachers do not really understand
the complex nature of the activity involved in design (Atkinson, 2011). Even though it has been
found that enthusiastic teachers can induce similar enthusiasm in their learners, the need to sustain
such enthusiasm is crucial if learners are to rise up to the challenge posed by the sometimes
exciting but arduous and difficult processes to achieve outcomes that they (the learners) and their
teachers can be proud of (Atkinson & Sandwith, 2014) In a study on design in the UK, Atkinson
(2012) found that "there were many teachers who were not taught to design during their training",
and that this has had a knock-on effect over the years as a result of the cyclical movement of
knowledge from teachers to pupils who in turn become teachers and lecturers who train the next
generation of teachers to design.
21
Norström (2014) studied the views of Swedish technology teachers on the technological
knowledge and noticed that the technology teachers had different views on technological
knowledge which could possibly lead them to variously prioritise what to teach and how to assess.
Atkinson (2012) presented a conference paper on the design process models that teachers present
to pupils as well as the teachers' own understanding of designing. According to her (ibid.: p. 3),
"Part of the problem has been that all the design process models produced over the years have
been of necessity a simplification of the real process involved" and that this is unhelpful in
explaining the complex, interactive nature of the design activity. Thus she explains that both
teachers and pupils perceive the requisite knowledge and physical skills in design to be straight-
forward activities. This supports the claim by Mawson (2003), Rowel (2004) and Williams (2000)
that the design process model used for teaching and learning does not make enough room for
flexibility. For teachers to successfully guide students in the design process to generate creative
output, it is imperative that they themselves understand the creative design process and its routine
(Wong & Siu, 2012). Rowel (2004) argues that contrary to conceptual and procedure oriented
approach, technology should be taught in a socio-cultural context where learners generate
knowledge through interpretation of interaction with materials and tools thereby placing them "as
critical inquirers into both tool-related and discursive practices of technology" and that early
technology education should involve scaffolding the learning process. Joan (2013) prescribed the
term `flexible learning' or `personalized learning' as the way forward. He describes it as "a set of
educational philosophies and systems, concerned with providing learners with increased choice,
convenience, and personalization to suit the learner. In particular, flexible learning provides
learners with choices about where, when, and how learning occurs". When learners are allowed to
explore as they move through the design process their skills are fostered thereby enriching the
learning of such students (Hill, 1998).
Traditionally, art and design educators gain their understanding of teaching creativity from
reflective experience rather than empirical research. Conversely, the majority of research studies
into learner creativity are laboratory-based, producing results which are reliable and valid in their
own terms but which are seldom tested within the complex richness of a `real-world' learning
environment (Dineen, Samuel, & Livesey, 2005).
Mawson (2007) observes that design at the workplace as it were, is different from how it happens
in the classroom in the sense that at the workplace designers build their experiences in a natural
way, and agrees with Lewis, (2006) that learners should also be helped to discover their own
ability in reaching decisions and to state and visualize their ideas. This scaffolding (Rowel, 2004)
22
will help replace the `default' nature with `surprise' problem/solution spaces of design for the
purpose of creativity (Dorst & Cross, 2001).
2.2.4 Learner autonomy
Autonomy is the ability of the learner to be in control of their own learning (Holec, 1979). Asik
(2010) explains learner autonomy as "a significant measure of independence from the control of
others" and that it is based on learner centered approaches of teaching which is also referred to as
constructivism (Bodner, 1986). Here the learner is allowed some independence to learn on their
own (Tok, 2011). Mawson (2007) suggests that learners should also be helped to discover their
own ability in reaching decisions and to state and visualize their ideas and that "lateral thoughts
built on the recognition of their own existing knowledge and ability" should be encouraged. This
is supported by Lewis(2006) who thinks children should rather be helped to achieve creativity. By
doing so the default nature of design will be replaced with the surprise problem/solution spaces of
design for the purpose of creativity (Dorst & Cross, 2001). The word `help' as used by both
Mawson and Lewis as well as Dorst and Cross is also referred to as minimal guidance (Kirschner,
Sweller & Clark, 2006) in the sense that none of them places strong emphasis on guidance of the
learning process of students.
Some loopholes have been identified in the constructivist approach to learning. Its unconditional
effectiveness is questioned. According to Kirschner et al. (2006, p.75) "minimally guided
instruction is less effective and less efficient than instructional approaches that place a strong
emphasis on guidance of the student learning process. The advantage of guidance recedes when
learners have sufficiently high prior knowledge to provide "internal" guidance". According to
them:
"Although unguided or minimally guided instructional approaches are very popular and
intuitively appealing, the point is made that these approaches ignore both the structures
that constitute human cognitive architecture and evidence from empirical studies over the
past half-century that consistently indicate that minimally guided instruction is less
effective and less efficient than instructional approaches that place a strong emphasis on
guidance of the student learning process"
In order to foster creativity of students in the design process, Jones (2002), recommends that the
teacher's occasional interruption during the generation of ideas by learners might also improve
ideation productivity and that the teacher should be able to blend generative thoughts processes
that give rise to original ideas and analytical thought processes required to refine the generated
ideas during design activities in the classroom. This occasional interruption also fosters the
23
student-teacher relationship which plays a crucial role in building up the strong symbiosis that
exists between teaching and learning and which constitute the spine in education (Hartfield, 2012).
Rutland (2009) advises that while interrupting the generation of ideas, care should be taken by the
teacher to avoid idea fixation. This (Rutland) said, can be when the teacher ensures that the design
brief used for the project in Design and Technology is open ended without any definite destination
towards the solution. Social interactions also play a vital role in problem solving activities during
design. Wong and Siu (2012, p. 12) observe that "Sociologically, activities are best to be finished
by working groups instead of individuals, as creativity involves a collection of ideas" and that
socializing of family members as well as classmates has the tendency to support students'
creativity (Webster, Campbell, & Jane, 2006).
2.3 CONCEPTUAL FRAMEWORK
Kuhn (1996) posits that professional practice is underpinned and shaped by a received set of
beliefs, values, views and models. In agreement Ball, Hill, and Bass (2005) and Wenglinsky
(2002) suggest that what a teacher does in class depends on the teachers' knowledge and the class
context. Therefore, the constructivism epistemology, Shulman's Pedagogical Content Knowledge
model (PCK) (1986), Argyris and Schön's (1974) notion of espoused theory and theory in use,
and Singh-Pillay's (2010) notion of interface have been used to frame the research. An
understanding of the role of constructivism in technology teaching is part of technology teachers
"professional content knowledge". Teacher content knowledge is invariably linked to their
espoused theory of the design process whilst their pedagogy is linked to their theory in use. One's
espoused theory of the design process can be juxtaposed with their theory in use by using the
notion of an interface.
2.3.1 Constructivist Epistemology
Constructivist epistemology is construed as a way of making sense to how students learn in a
particular context (Cobern, 1995; Lorsbach & Tobin, 1992). The hallmark of constructivism is
first, that learners are active in constructing their own knowledge and second, that social
interactions are important in this knowledge construction. In other words, learning is a social
activity whereby students are exposed to the thinking processes and successful problem solving
techniques of others in order to arrive at their own solutions. Vygotsky (1978) argues that because
education is intended to develop an individual's personality and it is also linked to the development
of an individual's creative potential, therefore opportunities should be provided for this creative
development. In this regard, Mawson (2007) suggests that learners should be allowed to discover
their own ability in reaching decisions, state and visualize their ideas during the design process
24
and engage in "lateral thoughts built on the recognition of their own existing knowledge and
ability". This is supported by Lewis (2006) who also contends that children should rather be
permitted to achieve creativity during the design process. By doing so the default nature of design
will be replaced with the surprise problem/solution spaces of design for the purpose of creativity
(Dorst & Cross, 2001). Simply put, this means that constructivism embraces the notion of learner
autonomy or creativity during the learning process (Bodner, 1986). According to Asik (2010)
learner autonomy is "a significant measure of independence from the control of others".
2.3.2 Conceptualizing Pedagogical Content Knowledge
Shulman (1987) defines Pedagogical Content Knowledge (PCK) as "a special amalgam of content
and pedagogy that is uniquely the province of teachers, their own special form of professional
understanding".
This means that Pedagogical Content Knowledge (PCK), distinguishes the teacher from the
subject matter specialist. In Shulman's definition, PCK refers to the transformation of content into
a form that makes learning possible. He further listed PCK as one of the seven fundamental
knowledge domains in his professional knowledge base for teaching (Shulman, 1987: p. 8) as:
25
· Content knowledge
· General pedagogical knowledge with special reference to those broad principles and strategies
of classroom management and organization that appear to transcend subject matter
· Curriculum knowledge with particular grasp of the materials and programmes that serve as
`tools of the trade' for teachers
· Pedagogical content knowledge, that special amalgam of content and pedagogy that is
uniquely the province of teachers, their own special form of professional understanding
· Knowledge of learners and their characteristics
· Knowledge of educational contexts, ranging from the workings of the group or classroom, the
governance and financing of school districts, to the character of communities and cultures
· Knowledge of educational ends, purposes, and values, and their philosophical and historical
grounds
In the 27 years since Shulman's introduction of the concept, various conceptualisations of PCK
have emerged, as reflected in Figure 2.1 below. A number of models have suggested that PCK is
an integration of some or all of the other knowledge areas outlined by Shulman. For example,
Bishop and Denley (2007) conceptualise the relationship between PCK and the other categories
as a `spinning top' (Bishop & Denley, 2007, p. 9) where all the categories in Shulman's knowledge
base merge into PCK as the teacher transforms the content being taught. This model is shown in
Figure 2.1.
Figure 2.1: `Spinning top' model for pedagogical content knowledge
(Source: Bishop & Denley, 2007, p. 9)
26
Another model which conceptualised PCK as an integration of other knowledge bases is that of
Cochrane, De Ruiter, and King (1993), whose model emphasised the developmental nature of
PCK. For them, knowledge of pedagogy, subject matter, students and environmental context
played the most important roles in the development of PCK. This is shown in Figure 2.2. It can be
noted here that they use the term `knowing' to emphasise the dynamic and active nature of PCK.
They also proposed a synthesis and integration of the constituent components of PCK, as shown
by the overlapping circles in the diagram. The arrows are included to emphasise the possibility of
expansion and growth. A teacher can have varying levels of knowledge of the components, and,
for example, limited knowledge of subject matter will restrict PCK and growth in this area will
grow PCK.
Figure 2.2: Developmental model of pedagogical content knowing (PCK)
(Source: Cochrane et al., 1993)
Another view of PCK identified by Gess-Newsome (1999) sees PCK as an intersection of
subject matter knowledge, pedagogical knowledge and conceptual knowledge as shown in
Figure 2. 3.
27
Figure 2.3: Gess-Newsome's model of PCK
(Source: Gess-Newsome, 1999) (redrawn)
Several authors view PCK as a transformation of the contributing knowledge categories
(Grossman, 1990; Magnusson, Krajcik, & Borko, 1999). Grossman Context, as shown in Figure
2.4
Figure 2.4: A transformative model of PCK
(Source: Grossman, 1990) (redrawn)
According to this model, content knowledge on its own, or pedagogy on its own, are not enough
for quality teaching. Sound knowledge of these is necessary, but in addition, a transformation
process is required in order for effective teaching to take place. The implication for research is
that when studying PCK one cannot examine subject matter knowledge, pedagogical knowledge
Subject matter knowledge
Pedagogical knowledge
Pedagogical Content Knowledge
Knowledge of content
28
and contextual knowledge on their own, and then infer the PCK of the particular teacher. PCK
itself also needs to be examined to obtain a more accurate reflection of the teacher's knowledge.
To address this dilemma Loughran, Berry & Mulhall (2012) explain that PCK involves the teacher
having a know-how of alternative forms of representation and that some of these teaching methods
derive from research whereas others originate in what they call "the wisdom of practice". William
and Lockley (2012) have outlined some characteristics of PCK. According to William and
Lockley, (ibid.: p. 34), PCK "...is topic-specific, unique to each teacher and can only be gained
through teaching practice". They continue that teaching is a complex and problematic activity
which goes beyond a simple transmission of concepts and skills from the teacher down the line to
the learner, and that teaching requires many and varied on-the-spot decisions and responses to the
ongoing learning needs of students. William and Lockley (2012) cite the work of Magnusson,
Krajcik and Borko which identifies their proposed five components of PCK. In their view, the
PCK of an experienced teacher includes his/her
· Orientations towards teaching: This component refers to teachers' beliefs about the purposes
and goals for teaching technology at different grade levels (Grossman, 1990). Since the
transformation of teacher knowledge from other knowledge domains into PCK is not a
straightforward task but an intentional act in which teachers choose to reconstruct their
understanding to fit a situation (Magnusson, Krajcik, & Borko, 1999), orientations to teaching
technology influence PCK construction by serving as a concept map that guides instructional
decisions, the use of particular curricular materials and instructional strategies, and assessment
of student learning (Borko & Putnam, 1996).
· Knowledge of curriculum (what and when to teach): This refers to teachers' knowledge about
curriculum materials available for teaching particular subject matter as well as about both the
horizontal and vertical curricula for a subject (Grossman, 1990). This component is indicative
of teacher understanding of the importance of topics relative to the curriculum as a whole. This
knowledge enables teachers to identify core concepts, modify activities, and eliminate aspects
judged to be peripheral to the targeted conceptual understandings. Geddis et al. (1993: p. 576)
called this understanding "curricular saliency" to point to the tension between "covering the
curriculum" and "teaching for understanding."
· Knowledge of assessment (why, what, and how to assess): Novak (1993) stated, "Every
educational event has a learner, a teacher, a subject matter, and a social environment. I would
like to suggest a fifth element evaluation" (p. 54). In accordance with this, knowledge of
assessment is an important component of PCK. This component is comprised of knowledge
of the dimensions of technology learning important to assess, and knowledge of the methods
29
by which that learning can be assessed (Tamir, 1988). Evaluation includes knowledge of
specific instruments, approaches, or activities.
· Knowledge of students' understanding of the subject: To employ PCK effectively, teachers
must have knowledge about what students know about a topic and areas of likely difficulty.
This component includes knowledge of students' conceptions of particular topics, learning
difficulties, motivation, and diversity in ability, learning style, interest, developmental level,
and need.
· Knowledge of instructional strategies: This component consists of two categories: subject-
specific strategies and topic-specific strategies (Magnusson et al. 1999). Subject-specific
strategies are general approaches to instruction that are consistent with the goals of technology
teaching in teachers' minds such as learning cycles, conceptual change strategies, and inquiry-
oriented instruction. Topic-specific strategies refer to specific strategies that apply to teaching
particular topics within a domain of technology.
Figure 2.5: Components of PCK
(Source: Magnusson et al (1999) (redrawn)
According to Park & Chen (2012) all the components of PCK are closely integrated and that they
influence each other when observed in practice as shown in Figure 2.6. They also identified that
PCK developed through the teacher's reflection on a lesson while teaching (reflection-inaction)
and after a lesson (reflection-on-action) (Park & Chen, 2012; Park & Oliver, 2008; Schön, 1983,
1987)
PCK
Orientation towards
teaching
Knowledge of
technology curricula
Knowledge of
assessment of
technological literacy
Knowledge of learners
understanding
Knowledge of
instructional strategies
30
Figure 2.6: Park and co-workers' pentagon model of PCK
(Source: Park & Chen, 2012; Park & Oliver, 2008 (redrawn)
In light of the above advancement in the models that represent PCK , Rohaan, Taconis, and
Jochems (2010) cited Bransford, Brown and Cocking argue that "Outstanding teaching requires
teachers to have a deep understanding of the subject matter and its structure, as well as an equally
thorough understanding of the kinds of teaching activities that help students understand the subject
matter in order to be capable of asking probing questions". Since learners are from different
backgrounds with different conceptions and preconceptions Loughran et al. (2012: p. 7) believe
that it takes PCK to harness all such conceptions and preconceptions into knowledge. According
to them "Pedagogical content knowledge also includes an understanding of what makes the
learning of specific topics easy or difficult: the conceptions and preconceptions that students of
different ages and backgrounds bring with them to the learning of those most frequently taught
topics and lessons". Explaining this, they paraphrase Shulman that "If those preconceptions are
misconceptions, which they so often are, teachers need knowledge of the strategies most likely to
be fruitful in reorganizing the understanding of learners, because those learners are unlikely to
appear before them as blank slates" (ibid.: p. 7). Expertise in PCK is not handed down to teachers
31
at birth. This has been indicated by William and Lockley (2012) who believe that the bank of skills
and knowledge needed by novice teachers to become professional teachers who are experts in their
field takes time to develop and that these beginner teachers may not see the complexities involved
in the processes of pedagogical reasoning and action (Shulman, 1986).
PCK, as defined by Shulman (1986), attempts to bridge what he describes as the gap between the
content teachers are required and expected to know and the tools they should possess to make that
knowledge accessible to students. A teacher's PCK impacts on learning. This is because an
enhanced teacher's PCK developed with time stimulates positive attitude towards teaching and
brings about increased learning and interest in technology (Rohaan et al., 2010) These are not
simply the tools of classroom management but rather knowledge of strategies and student ideas
that are particular to the content being taught in a particular context. This means that content
knowledge alone is not enough to bring about learning in students. How to transfer this learned
concept to students is crucial hence the use of constructivism, PCK and espoused theory and theory
in use to frame this study. Shulman (1986: p. 7) describes PCK as "the most useful ways of
representing and formulating the subject that makes it comprehensible to others". PCK comprises
of the following components: orientation towards teaching (knowledge of and about the subject,
beliefs about it and how to teach it); knowledge of curriculum (what and when to teach),
knowledge of assessment (why, what and how to assess); knowledge of students' understanding
of the subject and knowledge of instructional strategies.
Therefore, PCK is the intersection of content knowledge and pedagogical knowledge specific to
a content area. Effective teaching is not achieved by simply being an expert in a field; nor is it
achieved solely by possessing skills and knowledge of pedagogical practice. Using Shulman's
PCK framework will be beneficial during data analysis as Shulman looked to understand where
teachers' knowledge comes from, how teachers make decisions about how to teach a topic, and
how they choose to represent an idea or address student misconceptions.
The perspective of the teacher impacts significantly on the development of creativity and
collaborative learning and that those perspectives are influenced by PCK (Hämäläinen &
Vähäsantanen, 2011). According to Hämäläinen and Vähäsantanen, (ibid.: p. 177) "there is a need
to know the theories and contents of the learning and sense the contextual needs of the learning
situation. As artists must know the painting techniques before the creative painting can emerge,
the teacher must have sufficient pedagogic expertise to orchestrate successful collaborative
learning". It is therefore imperative to know the PCK of the teacher as such knowledge shapes up
32
his views regarding the design process and will subsequently impact on their teaching strategies
or styles.
Due to the disjuncture between content knowledge and PCK, teachers' class room practice is often
not consistent with their views or beliefs about a specific topic such as the design process. In this
regard, Agyris and Schön (1974) are of the belief that people are designers of their actions.
Furthermore they maintain that people design action in order to achieve intended consequences
and monitor to learn if their actions are effective.
2.3.3 Espoused theory and theory in use
Argyris and Schön (1974) have indicated that people hold mental maps about how to plan,
implement and review their actions. They assert that few people are aware that the maps they use
to take action are not the theories they explicitly espouse. In addition, Argyris (1980) contends
that even fewer people are aware of the maps or theories they use. In other words, this is not just
the difference between what people say and do. According to Argyris and Schön, there is a theory
consistent with what people say and a theory consistent with what they do. Therefore the
distinction is not between "theory and action but between two different "theories of action"
(Argyris, Putnam & McLain Smith, 1985, p. 82). Hence, the concepts of espoused theory and
theory in use. Espoused Theory is the theory used for explaining the action to others, but not
necessarily for conducting the action. Espoused Theories are explicit. Theory-in-use is embedded
in the logic of the action: it is the theory that commands the thinking of the action. Theories-in-
use are tacit. Human action may or may not be consistent with a person's espoused theory;
therefore it is never accidental or theoretical. To achieve congruence between espoused theory and
theory in use, one has to engage in reflective practice. The goal of reflective practice, according
to Argyris and Schön (1974) is to create a world that more faithfully reflects the values and beliefs
of the people in it through the revision of people's action theories.
2.3.4 Interface
According of Singh-Pillay (2010) the interface arises out of the points of convergence and
divergence amongst the elements or people's views. It is this understanding that is applied in this
study. The concept of an interface is construed as a meeting point (convergences) or a point of
deviations (divergences) amongst teachers' espoused theory and theory in use. Teachers' espoused
theory of the design process will be juxtaposed with teachers theory in use to look for congruence
(convergences) or divergences (non- congruence).
33
2.4 CHAPTER SUMMARY
In this chapter presents a review of literature on the design process, the differing perspectives
amongst scholars as to how the design process should occur as well as how the teaching of the
design process should occur. A brief explanation was provided for the study embracing a
constructivist approach whilst the notion of pedagogical content knowledge was reviewed to
support my argument that teachers' views of the design process influence their engagement and
enactment of the design process. The conceptual framework used to explore and understand the
link between grade 9 technology teachers' views of the design process and their class room
practice of the design process was PCK, the concept of espoused theory and theory in use and the
notion of interface. In the next chapter, the methodology used in this study is elaborated.
34
CHAPTER 3
METHODOLOGY
3.1 INTRODUCTION
In this chapter I discuss the philosophical assumptions underpinning this study and explain why
this study adopts a qualitative as well as a case study approach. It also describes the research site
and the data collection method employed in the study. The chapter also gives an account of how
various gatekeepers at each stage of the research were approached in order to gain access and gives
an account of the dilemmas encountered by the researcher during the data collection phase of the
research. The instruments used and the sampling procedure used in the study are explicated. This
is followed by the description of data collection procedure and the method of data analysis. The
chapter ends with the description of the validity and reliability of the instruments.
3.2. PHILOSOPHICAL ASSUMPTIONS UNDERPINNING THIS STUDY
3.2.1 Why this study involves qualitative data
This study is located within the interpretivist paradigm and adopts a qualitative approach for the
methodology. According to Cohen, Manion, and Morrison (2011) the interpretivist paradigm aims
to understand, describe and interpret in detail the lived experiences of participants in a study.
Within this framework the teacher is seen as a social being situated within a particular social
background. The social background within which the teacher works is influenced by contextual
factors. These factors such as resources and types of training are considered when we examine
teacher practices in terms of the design process.
Hence, the study draws from the assumptions of
the interpretivist paradigm to explore grade 9 technology teachers' views of the design process
and its impact on their teaching of the design process. According to Mcmillan and Schumacher
(2010) the goals of qualitative research are to "describe and explore" and to "describe and explain
any phenomenon". The reason for collecting qualitative data for the study was to gain a greater
and deeper insight (Bertram, 2003; Kumar, 2005) into grade 9 technology teachers' views of the
design process and how these views influence their teaching of the design process.. In order to
access such views there was the need to make room for flexibility at every stage of the research.
Qualitative data was deemed suitable as it captures a wide range of responses which entails
observed situations and opinions of respondents.
35
3.2.2 Reasons for using a case study approach for the study
The ontological position of the interpretative paradigm directs this study to deploy a case study
approach to explore grade 9 technology teachers' views of the design process and how these views
influence their teaching of the design process. According to Creswell (2013), case study research
approach aims to explore in order to understand things in detail. In this regard, Yin (2009)
maintains that case study is an empirical inquiry approach that investigates a phenomenon within
its real-life context. The method allows participants to freely share their ideas, views, perceptions
and experiences in their natural settings, making it possible for the participants to provide in-depth
information/data (Cohen, Manion &Morrison, 2013). This means that a case study is very suitable
and useful when a researcher is seeking for in-depth understanding of a specific event, process,
organisation or particular group/groups of people in a particular place. In case study research
methodology, the context (real-life context) is a major factor as it gives the researcher the
opportunity of interacting with the participants in their natural setting, thereby leading to in-depth
understanding and interpretation of the phenomenon under investigation.
The distinguishing feature of case study approach is that the case study methodology provides rich
thick descriptions of the participants lived experiences, thoughts and feeling about a particular
phenomenon within a specific context, using multiple data sources.
There are different categories or types of the case study approach which a researcher can choose
from (Cohen, Manion, & Morrison, 2013). These categories of case study are distinguished by the
intention and purpose of the study (Stake, 2000; Creswell, 2013). In this regard, Stake (2000),
Creswell (2013) as well as Cohen et al (2013) identified the following categories of case studies:
· Intrinsic case study: These are studies undertaken in order to understand the particular case at
hand Cohen et al. (2013). According to Lapan, Quartaroli and Riemer (2012), the intrinsic
case study focuses on the case being studied, answering questions about that entity or object
and conveying the illuminated operations to its participants and stakeholders. Here, the
purpose is not to understand some abstract generic phenomenon, but to develop a detailed
understanding of the case at hand. In other words, an intrinsic case study focuses on developing
a deep insight of a particular case.
· Instrumental case study: This examines a particular case or instance to build new theories or
to compare findings to new ones for corroboration or to question their validity Lapan,
Quartaroli and Riemer (2012). The case here is of secondary interest, which is facilitating of
theory.
36
· Collective case study: This involves studying a number of cases (multiple case studies) jointly
in order to investigate a phenomenon Creswell (2013). This method is believed to offer better
understanding of the phenomenon/case.
In another classification of case study research approaches, Yin (1994) cited in Cohen et al. (2013
p. 291) and Robson (1993) identified three categories of case studies with regards to their
outcomes. These include:
· Exploratory case study: This serves as suitable means of eliciting information in order to seek
new insights and clarify ones understanding of process or a problem. This approach also serves
as a pilot to other studies or research questions. This implies that the exploratory approach
provides new and detailed information or insight about a problem or a process (the
phenomenon) through the research findings, which can perhaps inform policy or serve as the
background for further research.
· Descriptive case study: This type of case study focuses on providing narrative accounts.
· Explanatory case study: This deals with hypothesis testing.
Taking the above into account whilst considering my research question I arrived at the decision
that the first research question "What are Gr 9 technology teachers' views of the design process?"
entails a descriptive case study whilst the second research question "How do these views influence
their teaching of the design process?" embraces an explanatory case study.
The intention was not to judge teacher practice but to understand the reasons behind teacher
practices with regard to the design process. The study involved real people in real situations and
provides an in-depth study of participants' unique and common features in a limited time frame
(Bell, 1993; Cohen, Manion, & Morrison, 2007; Denscombe, 2003; Kumar, 2005). According to
Murray and Beglar (2009), "Case studies can be defined as the intensive, in-depth study of a
specific individual or specific context or situation. The real strength of the case study method is
its potential to illuminate a `case' in great depth and detail and to place that case in a `real'
context".
Adopting a case study approach in the study yielded some advantages. A case study allows the
use of various method and that it does not claim any particular method for data collection in order
to answer the critical question in a research (Bell, 1993; Denscombe, 2003). It provides a
broadened view about varying human behaviours and exposes the views and choices of
37
participants within a chosen context and that it addresses the `how' and `why' questions in research
(Anderson & Arsenault, 1998).
Therefore a case study approach can offer is an in-depth understanding of how various aspects in
the case interrelate. Case study is thus uniquely placed to deliver explanatory theory. The potential
transferability of these findings to other similar contexts can only be partly suggested by the author
but ultimately is the responsibility of the reader who can compare the case to another context.
In this sense then, it has been argued that the case study is associated with its own particular forms
of generalizability (Flyvbjerg, 2006)
.
3.3 LOCATION OF THIS STUDY
This study is located in the township of Chatsworth, specifically in the Chatsworth West ward of
the Chatsworth circuit in the Umlazi district of the Kwazulu-Natal Department of Basic Education
(KZNDBE). Chatsworth is situated in South Durban basin in South Africa and is roughly bordered
by the Umhlatuzana River in the North and Umlaas River in the South. The township of
Chatsworth was created during the apartheid era specifically for Indians but currently it
accommodates a mixed population. There are sixteen secondary schools within the Chatsworth
West ward and out of these, fourteen are public schools and two are independent (KZNDBE,
2012). Schools within the Chatsworth West jurisdiction belonged to previous ex-departments of
education, namely the House of Delegates which controlled Indian education prior to democracy),
and the Department of Education and Training which controlled African education). The
Chatsworth West was selected as the location for the study. This is because I teach in this area and
I am known to many of the technology education teachers in this area as we meet at the KZN DoE
technology meetings.
3.4 DATA COLLECTION METHODS
The findings of every empirical study should be evidenced in the data collected during the study.
Failing to identify the appropriate instrument for data collection can impact negatively on the
research findings. This is because the relevant information in the form of phenomena, patterns,
actions and behaviours among others can only be extracted from the analysis of such data.
Information may therefore be concealed from the researcher who employs inappropriate method(s)
of data collection.
Data can exist in two ways. It can exist in the form of already existing information such as school
records, census data, or other existing literature waiting to be accessed. This is known as secondary
data (Kumar, 2005). Data collected directly and first-hand from the source such as interviewing
38
and or observing people, collecting responses through the use of a questionnaire are referred to as
primary data (Bertram, 2003; Cohen et al., 2007; Denscombe, 2003). The data collected for the
purposes of this study is entirely from a primary source. In this section I discuss issues pertaining
to gaining access, instruments used, sampling methods deployed, phases of data collection, how
data was analysed as well as how issues of trustworthiness, validity and reliability.
3.4.1 Gaining access
Gaining access means dealing with various gatekeepers at each stage of the research. Formal
permission to conduct research was obtained from UKZN's research office. Permission was also
sought from the principals of the school within the Chatsworth West ward to conduct research at
their schools. I experienced difficulty in trying to contact the principals of certain schools as they
were attending a series of meetings in preparation for a looming strike by the teacher unions. After
many fruitless visits, some of the principals were finally contacted and formal permission was
granted for the study to be conducted in those schools. In one instance, when I arrived at a school,
my supervisor was telephoned to confirm that I was her student before I could be granted
permission to conduct research at that particular school. In spite of all my efforts, the principals
of two schools refused to grant me entry into their school premises as they were not au fait with
the new regulations pertaining to permission to conduct research at schools. This reduced the
number of participating schools from fourteen to twelve.
Once I had gained the consent of the principals to conduct research at their schools, I sought
permission from grade 9 technology teachers' to participate in this study. Whilst acquiring
permission from the teachers to participate, I verbally informed them about the background to the
purpose for the study. Participants were made aware that they could withdraw from the study at
any time they prefer to and they would also be guaranteed of confidentiality and anonymity.
I have come to realize that gaining access is an iterative process. It entailed dealing with various
gatekeepers at each stage of the research. For example even though the principal of twelve schools
had granted me access to their schools and the 12 teachers had consented to participate in the
study, participants from two schools failed to return the completed questionnaire citing
examination pressure as a reason. They had failed to indicate their unwillingness to participate in
the study and this reduced the number of participants from twelve to ten. A methodological
challenge encountered during the observation of lessons was teachers having to adhere to the
standardized work schedule (a weekly and daily forecast of teaching and learning activities as
39
outlined in the CAPS document). As a result, dates for observation of lessons had to be re-
scheduled until the lessons involving the design process were being taught.
3.4.2 Instruments
The following instruments were used to capture data to answer the two research questions posed:
questionnaire, semi structure interview, observation of lesson, post-observation interview. The
reason for using the instruments mentioned was that they were suitable instruments to be used to
collect qualitative data for the study which it also qualitative in nature.
3.4.2.1 Questionnaire
An open ended questionnaire was designed with the assistance of university researchers and
piloted with technology Honours students who are teachers of technology (see appendix for
questionnaire). Using an open ended questionnaire to collect data for this study was deemed
suitable because open ended questions capture the specificity of a particular situation (Cohen et
al., 2007). Seeking the views of grade 9 technology teachers on the design process implies that
many possible answers may be expected. In the light of this, Cohen et al. (2007: p. 321) cited the
work of Bailey that "Open ended questions are useful if the possible answers are unknown or the
questionnaire is exploratory". Cohen et al (ibid.) add that open ended questions make it possible
and easy for the respondents to answer the questionnaire without any restrictions on what they
wish to say and this makes it suitable for enquiring into complex issues which demand more than
just simple answers.
The questionnaire was piloted to check the clarity of the questionnaire items, eliminate ambiguities
or difficult wording. The outcome of the piloting indicated that the questionnaire items had good
construct validity. According to Cohen et al. (2011) a pilot study serves to increase the reliability,
validity and practicability of the questionnaire. The rationale for using the questionnaire first was
twofold. First, it allowed participants the opportunity to answer the questions privately, and the
information is written down by the participants in their own words which reduces the possibility
of the researcher misinterpreting the information and then misrepresenting in the field notes.
Second the analysis of the responses to the questionnaire helped in the selection of the sample for
the second phase of data collection. The questionnaire targeted biographical data as well as
information on understanding of the design process, the importance of the design process in
teaching technology, planning that goes into teaching the design process, and aspects of the design
process that are emphasised during teaching. The information obtained from the questionnaire was
40
used to map the grade 9 technology education topography within the Chatsworth West ward in
terms of teachers' conception of the design process.
Copies of the questionnaire were delivered personally to twelve grade 9 technology teachers in
the Chatsworth West Ward at their respective schools for completion. Teachers were given a
timeframe of one week to complete the questionnaire before it was collected from them. As a
follow-up measure, telephone calls were made to respondents after four days to remind them to
complete the questionnaire in time. Contrary to expectation, it took two weeks to retrieve the
distributed questionnaire. One teacher, who had agreed to participate in this study, returned a blank
questionnaire as he had no clue as to how he can answer the questionnaire items and he was only
able to complete the part that required his biographical data. Another teacher failed to complete
and return the questionnaire. It appeared he had no time to complete the questionnaire since he
kept on asking for extensions earlier on. The returned questionnaires were coded from T1 up to
T10 (Teacher 1 up to Teacher 10) to represent the ten respondents and then analysed. The analysis
of the questionnaire was used to select four teachers for the semi-structured interview (phase 2).
The criteria for selection of the four respondent was based on the analysis their biographical data
as well as the analysis of their responses to the questionnaire items.
3.4.2.2 Semi- structured interview
A semi-structured interview was used as the second instrument as it allowed the researcher to
probe the participants' responses from the questionnaire. In explaining a semi-structured
interview, also referred to as informal, conversational or soft interviews, Longhurst, (2010, p56)
quotes the explanation given by Krueger and Casey that interviewing is about talking but it is also
"..about listening. It is about paying attention. It is about being open to hear what people have to
say. It is about being non-judgmental. It is about creating a comfortable environment for people
to share". In other words, the researcher has to be careful and systematic with the things people
tell you. The purpose of the interview was to sample the respondents' responses by asking them
questions in the same order thereby increasing comparability of responses (Cohen et al., 2007).
Participants were purposively selected based on analysis of their perception of the design process
and the impact of their perception on their teaching style. The selection criteria was informed by
factors such as the qualification of teachers in the field of technology education as well as total
number of years of teaching experience in technology, the relevant Pedagogical Content
Knowledge (PCK) (Hämäläinen & Vähäsantanen, 2011; Koehler & Mishra, 2009; Shulman,
1986; Shulman, 1987) of teachers as well as gender balance were also taken into consideration.
41
The semi-structured interview was used to probe information about: teachers views of the design
process, methods used to teach the design process, reasons for using the methods mentioned, kinds
of activities given to learners during the design process and learner creativity during the design
process. The semi- structured interview (see appendix for semi-structured interview questions)
was used to identify the sample for phase three of data collection.
3.4.2.3 Observation schedule
An observation schedule was designed with the assistance of university researchers to observe the
teaching of the design process at two schools in the Chatsworth West (see appendix 4 for
observation schedule). The observation schedule focused on the following aspects: how the lesson
was introduced, methods deployed in teaching the design process, how learners' needs were
catered for as well as the kinds of activities learners engaged in. The purpose of the observations
was to gain insight into the teachers' practice (theory in use) and to capture if any, transformation
of the teachers' espoused views of the design process occurred.
3.4.2.4 Post-observation interview
Post-observation interviews were conducted with the two teachers whose lessons were observed
(see appendix - for post-observation interview) to probe what was observed during the delivery of
their lesson on the design process.
Post-observation interviews provide flexible opportunities to probe for greater depth than what
video recordings can provide. The focus of the research was not only to explore how teachers'
views of the design process influenced their teaching of the design process but also to gain insights
into the thinking and reasoning that took place in the process of knowledge transformation, and
the teacher's reflection in and on action (Park & Chen, 2012; Schön, 1983, 1987). The post-
observation interviews were used in the study to clarify, supplement and support what was
observed in the classroom and provide information that could not be captured by observation
alone.
3.4.3 Sampling
Convenience sampling as well as purposive sampling was used for the study. Convenience
sampling according to (Maree, 2007) refers to situations when population elements are selected
based on the fact that they are easily and conveniently available. This sampling method was chosen
on the grounds of proximity and affordability as I am a teacher in Chatsworth West ward. The aim
of purposive sampling was to identify the relevant respondents who have the right information
(Blanche, Blanche, Durrheim, & Painter, 2006). The participants in this study were also
42
purposively selected as they were teachers of grade 9 technology within the Chatsworth West
ward. The aim of using purposive sampling was to identify the relevant respondents who have the
right information (Blanche et al., 2006). According to Maxwell (1998) this is a strategy in which
particular settings, persons, or events are deliberately selected for the important information they
can provide that cannot be gotten as well from other choices.
3.4.4 Data Collection Plan
Data was collected in three phases as represented in Table 3.1 below:
Table 3.1: The phases of data collection, instruments used and the purpose of each phase
Phase Data source
Instrument
Research question/s
targeted
Purpose of phase
1
Ten grade 9 tech teachers Questionnaire
1. What are Gr 9
technology
teachers' views of
the design process?
2. How do these
views influence
their teaching of
the design process?
To obtain sample
for phase 2
2
Four Grade 9 tech
teachers who participated
in phase I of data
capture- selected
purposively:
Semi-structured
interview
1. What are Gr 9
technology
teachers' views of
the design process?
2. How do these
views influence
their teaching of
the design process?
To obtain sample
for phase 3
(classroom
observation)
3
Two grade 9 technology
teachers who participated
in phase 2 of data
capture- selected
purposively
· Observation
schedule
· Post-
observation
interview
1. What are Gr 9
technology
teachers' views of
the design process?
2. How do these
views influence
their teaching of
the design process?
To validate data
obtained from
phase 2
·
43
· Phase 1 The use of a questionnaire
An open ended questionnaire was used to collate data in phase one from ten grade 9 technology
teachers who consented to participate in the study. The purpose of this phase was to purposively
select a sample for phase 2, once the data from the questionnaire is analyzed and to map the grade
9 technology education topography within the Chatsworth West ward in terms of teachers'
conception of the design process.
· Phase 2: semi-structured interviews
Four out of ten grade 9 technology teachers who participated in phase one were purposively
selected for the second phase of data collection. The criteria for selection was based on the analysis
of their views of the design process and how those views impact on their teaching styles (in phase
one). Teachers purposively selected were teachers given the pseudonyms of T2, T4, T5 and T8.
· Criteria for the selection of participants for phase two
One factor that was considered was the availability and willingness of teachers to participate in
the semi-structured interviews. The biographical data of respondents were also taken into
consideration. This included the age of respondents as well as the number of years of teaching
experience of each selected participant and more specifically their number of years of teaching
technology. Teaching experience was perceived as a crucial factor in the development of teachers'
PCK (Shulman, 1987). Hence, the years of relevant teaching experience of a respondent were also
taken into account. Another crucial factor that was worth considering was the teachers' responses
to the questionnaire items. Some teachers were selected for phase two of data collection because
they either did not complete some aspects of the questionnaire or they were inconsistent in their
responses. Therefore, the need to revisit those teachers and to explore their views was crucial.
Teachers were therefore selected individually based on specific reasons.
· T2: At the time of the study, T2 had taught technology throughout his fourteen years career as
a teacher and had a qualification of M+4 (Higher Education) in the field of technology
education. It was therefore deemed reasonable and suitable to evaluate his PCK in the light of
his teaching experience and relevant academic qualification. Secondly, even though he
answered "Yes" to questionnaire item 4 (Do you do any planning before teaching the design
process? Please elaborate.), he (T2) did not elaborate on what type of planning he does before
teaching the design process. In spite of his rich teaching experience, his responses were very
sketchy and incomplete in some instances hence the need to include him in the group for
44
interviews. Also, he had already indicated his willingness to participate in any of the phases
of data collection activity.
· T4 is a female teacher with an Advanced Certificate (ACE) in Technology Education. She had
indicated how interesting her ACE programme was and how it made her understand more
about technology education. It was therefore going to be interesting to research her PCK. Her
responses in phase one indicated that she had a lot to contribute towards the study.
· T5 is also a female. She was the only respondent who indicated that the design process is a
non-linear (cyclical) process. Therefore, there was the need to know more about how she
presents it. Just like T2, T5 indicated she plans before teaching the DP but did not indicate the
preparation she does before the presentation of the DP. There was therefore the need to know
more about how she prepares before presenting the DP in a non-linear model. Secondly, she
had nine years of teaching experience in technology out of her twenty two year career and had
an M+4 (Higher Education) qualification in the field.
· T8 was the most interesting respondent in phase 1. He happened to be the oldest and the most
experienced among all the respondents. He was a fifty eight year old male teacher with twenty
seven years as a teacher and eight year as a technology teacher. Even though he was not the
respondent with the highest relevant teaching experience in technology education, he had other
experience. After considering his responses, it became apparent that unlike all the other
respondents he was the only one who had some experience in the design process outside the
classroom (in industry). There was therefore the need to establish if his experiences impacted
on his PCK.
Special arrangements were made with respondents so that the schedules for the interviews would
coincide with the non-teaching time of both the researcher and respondents. However, things did
not work out as planned. Interview schedules were disrupted due to the non-adherence to time
agreed upon by the researcher and respondents. Notwithstanding this, five semi-structured
interviews were finally conducted and out of these, four were selected for analysis. Interviews
were audio-recorded. The interviews enabled the interviewer to probe participant responses and
participants were given the opportunity to clarify and justify their responses. Probing questions
were occasionally used to seek clarity of respondents' responses. Each interview lasted an average
of six and a half minutes during which respondents answered questions that were pertinent to their
views of the design process as well as their teaching styles.
45
· Phase 3: Observation of Lesson
The third phase of data collection involved an observation of two teachers as they presented a
design lesson to their learners in a design class. The purpose was to check how teachers' views on
the design process impacted their teaching of the design process. This was done by collecting data
from the lessons observed and also from the post-observation interview in order to juxtapose this
data with the data from research question 1 to answer research question 2 of this study. To
juxtapose the data, I deployed Singh-Pillay's (2010) notion of an interface. She construed the
interface as both points of convergences (congruence) and points of divergence (no congruence)
among elements or people's views. The idea of interfaces is used to juxtapose espoused views and
theory in use in order to note congruence or non-congruence between them. According to Cohen
et al. (2007) observation:
"offers an investigator the opportunity to gather `live' data from naturally occurring social
situations. In this way, the researcher can look directly at what is taking place in situation
rather than relying on second-hand accounts. The use of immediate awareness, or direct
cognition, as a principal mode of research thus has the potential to yield more valid or
authentic data than would otherwise be the case with mediated or inferential methods. And
this is observation's unique
strength" (p. 396).
Both lessons observed were also video recorded till the end. Video recordings can capture non-
verbal data (body gestures, facial expression, and tone) that audio recordings cannot or that the
observer may miss. The advantage of using video recordings is that it is a mirror image of what
occurs, and it allows for repeated viewing and checking. During this phase an observation schedule
(see appendix) was used to observe teachers' enactment of the design process in their classroom.
· Criteria for the selection of participants for phase three
Two of the participants from phase 2 were purposively selected based on the analysis of their
views of the design process and its impact on their teaching style ascertained during the semi-
structured interview conducted in phase 2 of data capture. It, however, took a lot of convincing to
get at least one of the female respondents from phase two to participate in this third phase of data
collection activity since the one who was selected had stated in the answering of the questionnaire
that she was camera shy. At this stage it was very clear that there were two opposing views
regarding the nature of the DP and for that matter how it is presented to learners. T5 and T8 were
purposively selected for the live presentation and observation of their lessons.
46
T5 expressed duel views of the design process, as being iterative as well as being a set of
procedures to be followed whilst T8 construed the design process as involving critical and creative
thinking.
In both cases (T5 and T8), very interesting patterns were noticed in their responses in both the
questionnaire and the focus group interview. This was one of the reasons for selecting T5 and T8
for lesson observation. According to Sharan (2009), "a case might also be selected because it is
intrinsically interesting, and one would study it to achieve as full an understanding of the
phenomenon as possible".
Phase three was therefore the final phase of data collection where two identified methods of
presenting the DP were going to be observed in a real classroom presentation. The intention was
to trace how teachers' views on the design process influence their teaching of the design process.
All the data obtained from the three phases were compared for the purposes of triangulation
(Creswell & Miller, 2000).
A post-observation interview was also conducted after the observation of the lessons. The post-
observation interviews were also audio-recorded. The purpose was for both interviewer and
respondent to reflect on the lesson observed and to seek clarity on the teaching procedure used by
the respondent during the lesson delivery. It was also to seek clarification on the teaching styles
adopted.
3.4.5 Data analysis method
Hatch (2002) explains data analysis as:
"a systematic search for meaning. It is a way to process qualitative data so that what has
been learned can be communicated to others. Analysis means organizing and interrogating
data in ways that allow researchers to see patterns, identify themes, discover relationships,
develop explanations, make interpretations, mount critiques, or generate theories. It often
involves synthesis, evaluation, interpretation, categorization, hypothesizing, comparison,
and pattern finding. It always involves what Wolcott calls "mind work where researchers
always engage their own intellectual capacities to make sense of qualitative data" (p. 148).
Inductive data analysis methods were used in the three phases of this study. This approach
primarily involved detailed reading of raw data in order to derive concepts, themes or a model as
47
the researcher or the evaluator draws interpretations from the raw data (Thomas, 2006). The
purpose of using the inductive approach, as Thomas (2006: p. 237) puts it was to "(a) condense
raw textual data into a brief, summary format; (b) establish clear links between the evaluation or
research objectives and the summary findings derived from the raw data; and (c) develop a
framework of the underlying structure of experiences or processes that are evident in the raw data"
and that inductive reasoning was used to generate ideas from the data collected (Thorne, 2000).
The two research questions posed in this study were used for organizing the analysis. In this
approach all the relevant data from data sources (questionnaires, interviews, and observation
schedule) were collated to provide a collective answer to each research question. This was in line
with the explanation given by Cohen et al. (2011) that qualitative data involves organising,
accounting for and explaining the data in terms of the participant's conception of the phenomenon
being explored, noting patterns, themes and categories and regularities. In this study, technology
teachers' views of the design process was the unit of analysis. Shulman's (1986) PCK framework
was used to understand where teachers' knowledge comes from in respect of the design process
(that is, use of instructional strategies, knowledge of the technology curriculum, use of assessment
strategies, knowledge of learners' understanding in technology and use of explanations). Singh-
Pillay's notion of interface was applied to Argyris and Schön's (1974) espoused theory and theory
in use to establish if teachers espoused views of the design process were congruent with their
theory in use.
3.4.6 Credibility and Trustworthiness
To ensure credibility of this study, detailed description of the settings, participants and themes are
provided. (Creswell & Miller, 2000, p. 128). In addition multiple data collection strategies such
as questionnaires, semi-structured interviews, lesson observation and post lesson interviews were
used to ensure credibility and trustworthiness. To enhance the credibility and trustworthiness of
the data I engaged in triangulation of data and member checking.
3.4.6.1 Member checking during the research
Member checking is a research procedure used to ensure credibility and validity of the research.
According to Carlson (2010), member checking involves taking back the interview transcript or
observation transcripts and asking participants to check their accuracy. In this process, participants
are given the opportunity to elaborate, clarify or confirm aspects of the interview in order to ensure
that their views, experiences and perceptions were captured accurately during the interview. Thus,
member checking was adopted to guarantee the credibility of the research. Some participants were
48
reluctant to participate in the quality assurance activity, blaming their unwillingness on their tight
work schedules at work.
3.4.6.2 Triangulation during the research
Triangulation was used as a measure to ensure credibility and trustworthiness of this study. It is a
process used to ensure validity in a research. According to Creswell and Miller (2000),
triangulation is used to increase credibility and check dependability by sourcing information from
different sources to forms themes for the study. This was done by collecting data through the use
of questionnaires, interviews and observation to ensure the authenticity (validity and reliability)
of the data. This is to say data collated via a questionnaire, observation and interviews were
triangulated. Triangulation assisted in identifying and sorting out inconsistencies encountered in
the three phases of data collection.
3.4.6.3 Rigour
Like all other studies my research was subjected to open critique and evaluation from other
researchers to improve the value of the study, soundness of the methods used, accuracy of findings
as well as the quality of assumptions made or conclusions reached as proffered by Long &
Johhnson (2000). This was done in close and frequent consultations with my supervisor.
3.4.6.4 Anonymity
For ethical reasons all participants in the study were assured of the anonymity of their identity
before and after the data collection to enable them partake willingly and freely in the research. To
that effect, the anonymity of the respondents was fully ensured. Their identities were known only
to the researcher and the supervisor of this research. Again, ensuring anonymity also guaranteed
strict adherence to the University's research ethical standards
3.5 CHAPTER SUMMARY
In this chapter, the philosophical assumptions underpinning the study were discussed.
Explanations were given as to why this study adopts a qualitative approach and also uses a case
study approach within the interpretivist paradigm. The chapter also justified the collection and use
of qualitative data to answer the research questions. The research design including a description
of the research site, the data collection method, issues relating to gaining access to the research
site as well as to the respondents, sampling and sampling procedures together with the instruments
used were also discussed. The chapter also gave a description of the methods of data analysis and
ended with a discussion of issues of validity and reliability which ensure the credibility and
49
trustworthiness of the study. In the next chapter I present the finding and analysis of the data
collected.
50
CHAPTER 4
PRESENTATION OF FINDINGS AND ANALYSIS
4.1 INTRODUCTION
This chapter aims to answer the two research questions posed, namely, "What are Gr 9 technology
teachers' views of the design process?" and "How do these views influence their teaching of the
design process. As mentioned in the previous chapter data was collected using a questionnaire,
semi-structured interview, observation and post-observation interview. The chapter is divided into
part A and part B. Part A aims to answer the first research question whilst part B attempts to
answer the second research question.
4.2. PART A
The first research question, "What are Gr 9 technology teachers' views of the design process?" is
answered by using data from the questionnaire and semi-structured interviews. The two core views
on the design process that emerged from the thematic analysis are explored, namely:
· Design process as problem-solving; and
· Design process is a step-by-step process that provides "comfort" to learners during problem-
solving.
An analysis of the findings on the categories of descriptions that emerged on teachers' views of
the design process from the questionnaire and the semi-structured interview is presented.
4.2.1 Analysis of data
As mentioned in the previous chapter the questionnaire comprised of two sections. Section A
elicited biographical responses from the participants while section B consisted of questions
pertaining to the two research questions of the study. The first three questions of the questionnaire
targeted research question 1 (What are grade 9 technology teachers' views of the design process)
and the last three questions focused on research question 2 (How do these views influence their
teaching of the design process). In the section below, I present and discuss the finding from section
A of the questionnaire.
4.2.1.1 Biographical responses
The data acquired from the biographical section of the questionnaire was to create a context for
grade 9 technology education within Chatsworth West region. This section of the questionnaire
51
focused on teacher qualification, teacher age, gender, teaching experience, years teaching
technology education as well as whether they had attended any training for technology education
to assist with implementation of the curriculum.
In respect of teacher qualification, it is interesting to note eight out of the ten teachers have a
qualification to teach technology education. In addition to their qualification, these eight teachers
had attended technology education workshops offered by the KZN DoE to support curriculum
implementation. At a glance, an assumption can be made that these teachers should be au fait with
the design process as they have studied the design process, have a qualification to teach technology
education and have attended the workshops organized by KZN DoE as shown in Graph 4.1 below.
Graph 4.1: Technology teachers' qualifications
However, it is worth noting that there is a disparity between the number of years of teaching and
the number of years teaching technology amongst these teachers (Graph 4.2). This disparity
indicates that teachers' had to "re-train and re-skill" to teach technology at schools due to multiple
factors such as Post Provisioning Norm (PPN), and drop in learner enrolment at school. These
factors were not investigated as they do not fall within the scope of this study. The retraining and
re-skilling that these teachers had to endure might in some imperceptible way impact their views
of the design process as well as their engagement of technology education.
52
Graph 4.2: Depicting Teacher age, years of teaching and years teaching technology
Another interesting finding from the biographical data shows that technology education remains
largely a male dominated terrain (Graph 4.3). Seventy percent of this sample of technology
teachers was male.
Graph 4.3: Depicting gender distribution of teachers
53
4.2.1.2 Analysis of the findings on the categories for teachers' view of the design process
These views were drawn from the questionnaire and the semi-structured interview. As
mentioned earlier in the introduction the points elucidated were:
· Design process as problem-solving
· Design process is a step-by-step process that provides "comfort" to learners during
"problem-solving"
In the section that follows the 2 points mentioned above are elaborated.
4.2.1.2.1 Design process as problem-solving
In the relationship between the design process and problem-solving the following 4 categories
emerged:
· Used to solve problems
· Decision making process involving critical and creative thinking
· Cyclical process
· Core of technology
4.2.1.2.2 Used to solve problems
Seven technology education teachers view the design process as an activity that can be used to
solve problem as reflected in the excerpts below:
· T4: The design process is the same as problem-solving, you identify and define the problem,
also solve the problem;
· T5: it is the same process like problem-solving;
· T10: it's a successful solution to a problem.
The analysis highlights that these teachers do not differentiate between the design process and
problem-solving. In other words, the design process is construed to be identical to problem-
solving. Furthermore the design process is seen as a "method or structure or plan" that can be used
to solve problems, needs or wants.
54
4.2.1.2.3 Decision making process involving critical and creative thinking
Three teachers construe the design process as being related to critical thinking and creativity. Put
simply this means, for these particular teachers the design process is not reduced to a mere
problem-solving activity. It is an activity that promotes critical thinking as well as creativity. In
other words, for these teachers these are multiple solutions to any problem as well as multiple
ways to work towards solutions for the identified problem. The implications are that learners are
free to make choices as reflected in the excerpts below:
· T3: They must be creative and yet achieve its purpose.
· T8: "Sometimes a child may have one of the better solutions which I as a teacher would not
have thought about. They are doing projects on their own, some of them come up with really
good examples".
· T10: Try not to copy ideas, create your own design by thinking out of a box.
These teachers' views of the design process indicate that they encourage problem-solving in
diverse and creative ways (solutions which I as a teacher would not have thought about) as far as
design-related problems are concerned. Furthermore, they allow learners to take control of the
"learning" during the design process (they are doing the project on their own; create your own
design). This particular finding concurs with what Asik (2010) refers to as learner autonomy. Asik
(2010) maintains that learner autonomy is the independence from the control of others during
learning and it can only occur in a learner-centred classroom. Therefore, an assumption can be
deduced that these three teachers have learner-centred classrooms. What is interesting about these
teacher's views is that when I traced the response to the biographical data, these particular teachers
have been engaging with technology education for more than 10 years and they have attended all
the workshops conducted by the KZN DoE for policy implementation. One can reason that their
years of experience engaging with technology education have impacted on how they view the
design process and their embracing of learner-centred classroom pedagogy.
4.2.1.2.4 Cyclical process
Only two participants viewed the design process as being cyclical. This means the design process
is viewed as linear but the actions undertaken are seen as iterative
:
· T5: "the design process is an iterative process to solve problem...developing original ideas
to meet the needs or wants";
· T8: "It's a cyclic process, not a linear way to solve problems".
55
For these teachers the design process is not reduced to a "cook book recipe" whereby learners
follow the steps of the design process in a sequentially progressive fashion. For these teachers the
stages/steps of the design process lack sequential rigidity; rather it is an iterative process that
involves back and forth movement between stages or the skipping of a stage to refine ideas and
the end product. It is important to note that these teachers' views are aligned with the CAPS senior
phase technology policy's notion of the design process (DoE, 2012). In addition, the views of
these teachers conform to the views of scholars such as Lawson (2006) and Hill (1998) who
maintain the design process involves refinements of the design solution by ever changing design
ideas.
4.2.1.2.5 Core of technology
In their overall view of the design process as problem-solving, teachers were of the opinion that
the design process supports the teaching of technology education.
· T5: "It is the most important process in technology education".
· T6: "It is what drives technology and innovation".
· T8: "It is the backbone of technology education".
This finding corresponds with the philosophy of scholars just as Mawson (2003); Jones, Bunting
& de Vries (2013) as well as the Standards for Technological Literacy (ITEA, 2000, 2002) on the
design process being the core of technology education. The implications are that the design process
ought to guide teaching and learning in technology education.
4.2.1.3 Design process is a step-by-step process that provides comfort to learners during
problem-solving
A conflicting finding that presented itself within the collated data was some teachers who
considered the design process to be a method/plan used to solve problems also saw the design
process as a step-by-step process that provides comfort to learners during problem-solving. Within
this theme the following two categories emerged, namely
· Specific step-by-step process; and
· Safety net during problem-solving.
56
4.2.1.3.1. Specific step-by-step process
The view that the design process consists of steps or stages implies that the design process is a
rigid foreseeable, expected, banal, unsurprising linear process as can be inferred from the excerpt
below:
· T6: "Basically the need to follow, I tell them to follow the six steps one after the other";
· T2: "The steps you need to follow when you have to solve a problem"; and
· T5: "A set of procedures that needs to be followed".
These particular views of the design process contradict the view of the design process as cyclical
and restricts the design process to a rigid process that unfolds in a particular sequence ("you
identify, define...and solve the problem"). The implication of the above views of the design
process is that learners cannot skip stages to reach a solution. According to Williams (2000) and
Mawson (2003), a common view amongst teachers is the understanding of the design process as
a linear process. In other words, the design process is a series of steps that are outlined by the
teachers, viz. identify-design-make-appraise, and students are expected to follow these steps
sequentially and diligently in their projects. In addition, the linear view of the design process
hinders learner creativity as learners do not have the freedom to explore design solutions using
their own ideas or methods. Scholars such as Hill (1998); Williams (2000); Mawson (2003) and
Rowel (2004) argue that the seemingly rigid nature of the design process does not provide enough
room for developing the creative skills of the learner, and have suggested the need for an
alternative pedagogy or approach. It is interesting to note the contradictory view expressed by T5,
earlier. T5 considered the design process as iterative and now it is seen as a "set of procedures
that needs to be followed".
4.2.1.3.2 Safety net during problem-solving
The step-by-step nature of the design process is construed by some teachers as what makes things
easy for students during problem-solving in design. The rigid structure provided by the sequential
step-by-step process offers earners some sort of security framework or comfort within which to
work when solving problems in technology education. In a surreptitious way, it also offers teachers
a security framework or "comfort" to represent the design process as linear as it is easy to teach,
especially if their PCK is not well grounded in technology education as reflected in the excerpt
below:
· T6: "The step-by-step process gives learners directions towards the end product";
57
· T2:"It is not easy for the learners to finish their task and I can only teach design process if I
follow the steps";
· T7: "It is easier to teach the design process in a step-by-step manner".
It is in this regard that Williams (2000) contends that the rigid procedure or systematic re-
presentation of the design process is inviting to teachers, because it provides a structure for the
teaching of Technology. The biographical data indicates that T6 and T7 have very little experience
teaching technology education hence an assumption can be made that they lack the necessary PCK
to engage with the design process.
4.2.2. Answering research question one
In section 4A I have presented and analysed the data from the questionnaire and semi-structured
interview to answer research question 1. The two core views of the design process presented by
teachers are Design process as problem-solving and Design process is a step-by-step process that
provides "comfort" to learners during problem-solving. T5 and T8 were purposively identified
based on their espoused views of the design process to have their lessons observed. Of importance
is T5's espoused, dual view of the design process as problem-solving as well as a step-by-step
process, whilst T8 is of the view that the design process involves critical and creative thinking.
T8's view of the design process reveals that he has a learner-centred classroom. In exploring
teachers' views on the design process, it is obvious that their espoused views are shaped by their
PCK and experiences which ought to impinge on their practice. In section 4B I present and analyze
the data from the observation and post-observation interview.
4.3 PART B
In this section I present data in response to research question 2, "How do these views influence
their teaching of the design process?" The observation of lessons was followed by post-
observation interviews. The purpose of the observation was to trace how their espoused views or
theory of the design process impacted their actions during practice i.e. the teaching of the design
process. The following manifestations of PCK were used to analyse the data: use of instructional
strategies, knowledge of the technology curriculum, use of assessment strategies, knowledge of
learners' understanding in technology, and use of explanations. Argyris and Schön's (1974)
espoused theory and theory in action was also used to was interrogated the data. Narratives of T5
and T8 lesson observations are presented.
58
4.3.1 Lesson observation T5
Due to contextual factors, such as teacher strikes, backlog in teaching and assessment as well as
urgency to be on par with the designated work schedule, I was only able to observe one lesson
each for T5 and T8 on the design process. The lesson for T5 lasted for forty two (42 minutes)
whereas that of T8 lasted a period of thirty five (35) minutes. The disparity in the duration of the
lesson was due to the different teaching cycle adopted by the management and School Governing
Body of each school. T8's school runs a thirty minute cycle of periods after break and T5's school
runs a forty five minute cycle whereas some schools also do this on Thursdays and Fridays only.
4.3.1.1 Lesson observation of T5
As mentioned earlier the following five manifestations of PCK, namely, use of instructional
strategies, knowledge of the technology curriculum, use of assessment strategies, knowledge of
learners' understanding in technology and use of explanations as well as Argyris' and Schon's
(1974) espoused theory and theory in action was used to interrogate the data.
· The context
T5 teaches at Westview secondary school situated within the Chatsworth west circuit. The school
has a student population of 1,100 and charges a school fee of R2700 per learner per annum. It is
situated in a multiracial community comprising of Indians (89, %) , Africans (8)%) , Coloured
(1.%) and whites forming a total of less than one percent (Frith, 2014). The community is
heterogeneous in terms of socio economic living conditions. This socio-economic heterogeneity
is visible in the different types of dwellings in this area. Unemployment and crime is on the
increase in this community, as is in the rest of South Africa, hence security is a major concern to
the residents of this area. Even the school is conscious of need for security and is encircled by four
concrete walls of about 2 meters high with a remote controlled steel gate manned by a security
guard at all times. The school is neat, free of liter and well maintained. As I entered the school
gate I observed there were no learners loitering around the school. The first impression that greets
any visitor to the school is the aura of quiet and discipline.
Upon arrival at T5's school, I went to the administration block to sign the visitors book and to
announce my arrival, I waited at the reception area for about fifteen minutes for T5 to finish her
lunch (in the staffroom) before we proceeded to the classroom for the observation of her lesson.
T5 was gracious and took me to her classroom ten minutes before her lesson could begin. As we
waited for the learners to arrive, I went around the classroom to observe the classroom setting. It
was an exceptionally well-resourced classroom with a variety of colourful, neatly drawn and very
59
attractive posters mounted on the walls. The posters and drawings pertained to a wide range of
topics in grade 9 technology curriculum. These included posters on mechanisms, systems and
controls, electricity, gears, orthographic projection, perspective drawings among others. T5
indicated that she made most of these posters herself. There were other posters of civic
significance. These included posters of human rights, the Constitution as well as those for HIV.
The classroom was also decorated with models (mock-ups) made by learners in their previous
mini Practical Assessment Task (PAT) projects. These included models of houses, hydraulic
systems, and bridges among others. Half of the chalk board was covered with a large white screen
used for power point presentations. There was an overhead projector hanging from the deck
(ceiling) of the classroom and a connected laptop computer on the desk of T5. Hanging in the
windows were thick, long and opaque red curtains to prevent outside light from entering the
classroom during a presentation. The classroom setting and the quality of the mini PAT projects
on display illuminated T5`s enthusiasm about teaching technology education and the standard of
work she expected of her learners. It was clear that T5 was proud of her achievements in terms of
resources. All these varying resources together with educational technology made the classroom
of T5 an interesting place not only for teaching and learning but for observation as well. The
buzzer sounded to signal the end of the break and the commencement of the next period. Learners
walked into the classroom at a rapid pace in an orderly fashion and settled down quickly waiting
for the lesson to begin. It was obvious that learner discipline was a priority for the management of
Westview secondary school and hence learners did not loiter around and reported to classes
promptly.
· The lesson
Introduction stage
An examination of T5's technology master file revealed that each year she made use of a different
lesson plan, set of notes and PowerPoint slides. She keeps a collection of school textbooks in her
classroom which she mainly used as a source for exercises. Her master portfolio was meticulously
maintained. It was indexed and it contained the policy document, the work schedule for the year
for each grade of technology education she taught, the department's common assessment plan per
grade, learner assessment with rubrics and memos. It was interesting to note that diagnostic and
statistical analyses were done for tests written by learners. These analyses were then used for the
creation of extension activities or remediation activities for learners to support their learning in
technology education. The review of the lesson plan for the lesson to be observed indicated that
60
the specific aim for the lesson was to calculate gear ratios. The resources to be used to teach the
calculation of gear ratios included power point presentation, models, and charts. This was a follow
up lesson to the introduction on gears. T5 introduced the lesson by tapping into the learners'
relevant previous knowledge on gears using the question and answer technique. The teacher used
a colourful visually stimulating power point presentation for the revision of learners' relevant
previous knowledge. Here, learners were made to answer simple questions as a revision of their
previous knowledge. Some of the questions asked were; 1. What is a gear? 2. What are the
functions of gears? 3. What is an idler gear among others? Learners were enthusiastic and
participated actively in the lesson. The content T5 taught was strongly guided by the curriculum
requirements. The introduction stage of the lesson lasted for approximately seven minutes thirty
seconds.
Presentation stage:
T5 then followed up with the main lesson for the day. (What I want you to look at now, class is
calculation of gear ratio).
· Instructional strategy
Analysis of the lesson observation revealed that T5 used four instructional techniques, namely
· question and answer technique( brain storming),
· demonstration,
· guided discovery, and
· problem-solving
to facilitate the learning on the concept of gear ratios. When using the question and answer or
brain storming techniques, she showed learners a real model of a gear train together with 3-D
animations from the slides in the power point presentation as the resources for the calculation of
gear ratios and asked learners question pertaining to the gear train. As part of her demonstration,
T5 showed and demonstrated how the model gear train works by turning it manually as learners
watched. As part of her guided discovery technique, she then guided learners to establish the
number of cogs in each gear in the gear train that was on the screen before using problem-solving
to introduce the learners to the gear ratio formula for the calculation. Learners were given a task
to solve problem on gear ratio calculation and to apply their knowledge of gear ratio to specific
cases highlighted in the worksheet provided.
· Knowledge of technology curriculum and use of explanations
61
T5 was very knowledgeable about the technology curriculum goals, philosophy, content, specific
outcomes and what was required for assessments and examination purposes. She has access to
curriculum materials and made use of these in her teaching. She is passionate and enthusiastic
about teaching technology as can be gleaned from the excerpt below:
"I love teaching technology, it's so alive and interesting, you know, I am a qualified
Geography teacher but I have been teaching technology for the past 9 years, I attended
the training workshops conducted by the subject advisor, but it wasn't enough so I started
reading to learn as much as I can, and I'm still learning, I try and get many textbooks and
study them to help me, I treat the policy like the bible it guides me in my teaching and
assessment". (T5 semi-structured interview)
From the foregoing it is evident T5 is au fait with the policy document and is guided by the policy
in her teaching and assessment practice. This means that T5 embraces the philosophy of the CAPS
technology policy in her teaching. In this regard it is worth noting that T5 exposes learners to a
criticism free environment and embraces the idea of learner-centred classroom environment as
reflected in the excerpt below:
"Thank you, son, for coming to show your friends how to do the calculation. 15 goes into
15 once. It goes into 30 two times. What does 2:1 simply mean? Do not shout out. Raise
your hand! Rihanna".
From the observation of the lesson, it was conspicuous that the atmosphere in T5's classroom is
nurturing and learners freely answer questions posed and willingly participate in solving problems
on the board. This means that learners were confident in their learning and dealing with the
problem-solving approach. She uses positive reinforcement to maintain the interest of learners in
the lesson (good, thank you for coming to show your friends how to do the calculation, come you
try). In addition, she encourages learner engagement in her class (come you, try) and promotes
particular patterns of thinking amongst learners to solve the problem on gear ratio. She uses
practical examples to scaffold understanding of concepts such as driver and driven gears. The
teaching of the concept of gear was influenced by the teacher's own understanding (content
knowledge) of the concept as well as her pedagogical content knowledge. This was obvious in the
way the teacher explained the placing of the driver and the driven gear with her own reasons and
explanations.
62
· Use of assessment strategies
From her comments in the interview, the tension between completing the syllabus and making
sure that all the learners understand was exposed. Managing this tension is what Geddis et al.
(1993) included as part of curriculum saliency. As part of her daily assessment practice, two types
of questioning were identified in T5's classroom: one type was used to provide her with feedback
on the progress of her learners, whether they grasped what had been discussed, and the other was
more a rhetorical type question which I have considered to be part of her teaching style. She used
the questions to give her a general sense of whether the learners were following her, the various
cognitive level of questioning allowed for their use to probe for deep understanding. Another
assessment strategy that was used was that of giving the learners exercises or worksheets to do,
either at home or in class. As part of her assessment strategy, T5 acknowledged that learners learn
in different ways. She identified visual, audio and verbal learners and expressed the need to engage
with these learners in different ways to make learning more meaningful. She mentioned that she
could use pictures, models, you tube, videos and PowerPoint slides in addition to the usual talking
as a learning aid for her learners.
· Knowledge of learners' understanding
In the calculation of gear ratios and the application of gear ratios, the learners were allowed some
independence to find solutions (learn) on their own. In other words she allowed learners the space
to solve problems and apply their own ideas to solve those application problems. This embraces
Asik's (2010) notion of creativity.
It was interesting to note that evaluation was a continuous process throughout the lesson. The
teacher used diagnostic questions to establish areas of difficulty as teaching and learning
continued. To establish if learners understood the contents of the lesson, they were engaged in a
group activity; a game competition during which marks were awarded for correct solutions to
problems. T5 was aware that there were certain sections within gear ratios where her learners
would struggle more. T5's explanations followed a largely procedural approach.
· How does T5's view of the design process influence her teaching of the design process?
63
T5 espoused dual views of the design process during the semi-structured interview. On the one
hand, she viewed the design process as being iterative whilst on the other hand she considered the
design process a set of procedures to be followed. She also regards the design process as the:
"most important process in technology education". To unpack how these views on the design
process impact on the teaching of the design process, I draw on Singh-Pillay's (2010) notion of
interface. According to Singh-Pillay, the interface is a meeting point that arises from juxtaposing
elements or views. Interfacing T5's espoused theory on the design process (from the semi-
structured interview) with her theory in use (from the observation of the lesson and post-
observation interview), one can see that her espoused theory is directed at two levels: at the level
of subject specific strategies (design process is iterative) and at the level of topic specific strategies
(design process is a step-by-step process), and one can see congruence's between her espoused
theory and theory in use. The above-mentioned congruence could be attributed to T5's
biographical data as well as her passion and interest in teaching technology. According to her
biographical data, T5 has been teaching technology education for 9 years and has attended
workshops for curriculum implementation and conferences on technology education. Technology
education makes up 50% of T5's teaching workload and her comments in the semi-structured
interview confirm her deep interest in technology education.
T5 is well informed about the design process, her experience, training as well as her in-depth
content knowledge of the technology curriculum enables her to shift between subject specific
strategies (Design Process is iterative) and topic specific strategies (Design Process is a step-by-
step procedure) when engaging the teaching of the design process. Subject-specific strategies are
general approaches to instruction that are consistent with the goals of technology teaching in
teachers' minds such as learning cycles, conceptual change strategies, and inquiry-oriented
instruction whereas topic-specific strategies refer to specific strategies that apply to teaching
particular topics within a domain of technology (Magnusson et al., 1999).
Her orientation towards teaching (constructivist learner-centred), the use of teaching technology
(power point, models) has a direct bearing on her PCK in terms of the design process. Her PCK
of the design process in this case for gear ratio serves as a concept map that guides her instructional
decisions and strategies. T5's concept map for the teaching of design process (gear ratio in this
case) is guided by her understanding of the importance of the design process in the teaching of
technology education ("It is the most important process in technology education"). T5, being well
informed about the content related to gear ratio, modifies explanations and activities to suit the
need of her learners. T5 is, therefore, just not "covering the curriculum" but is "teaching for
understanding" (Geddis, Onslow, Beynon, & Oesch, 1993). T5 also exhibits knowledge of
64
students' understanding of gear ratio and the areas of likely difficulty (she makes references to
challenges learners encounter in the exams). As a result she uses simple analogies to show learners
how to distinguish between the driver and driven gear (If a smaller child has to race against...)
.
Shulman (1987)
wrote that PCK included "an understanding of how particular topics, problems,
or issues are organized, presented, and adapted to the diverse interests and abilities of learners,
and presented for instruction". Shulman (ibid.: p. 15) also suggested that pedagogical content
knowledge was the best knowledge base of teaching. The key to distinguishing the knowledge
base of teaching lies at the intersection of content and pedagogy, in the capacity of a teacher to
transform the content knowledge he or she possesses into forms that are pedagogically powerful
and yet adaptive to the variations in ability and background presented by the students". In addition,
T5 suggested strategies such as the use of mnemonics to help learners learn to remember the
formulae when calculating gear ratios as can be seen in the excerpt below:
"Now, many pupils in a test situation, they confuse. Is it driven gear over driver gear or is
it driver over driven. Am gonna (going to) teach you a very simple pneumonic to
remember.. and this is if you look at it alphabetically `n' comes before `r'. So to calculate
gear ratio you say gear ratio equals driven gear over driver gear" "...Always look at this
(points to the equation for gear ratio) n before r alphabetically, because people always get
confused, should put driver divided by driven?"
Furthermore, T5 was aware of individual cognitive differences amongst the learners in her class
as evidenced in the excerpt below:
"...each child thinks differently. Each child is unique in their own way. ... there are
different levels er...in questioning techniques; there are different levels in which they will
answer a question."
Rohaan et al. (2010) citing Bransford, Brown and Cocking state that "Outstanding teaching
requires teachers to have a deep understanding of the subject matter and its structure, as well as
an equally thorough understanding of the kinds of teaching activities that help students understand
the subject matter in order to be capable of asking probing questions".
From the foregoing it is evident that T5's view of the design process has influenced her teaching
of the design process. T5's teaching presented evidence of a rich store of pedagogical knowledge.
She operated in a functional classroom where teaching took place every day. She understood the
logic of the school where she was teaching and was able to operate in it. Furthermore, she had a
good rapport with her learners and they had the freedom to ask her about the work, even outside
of the normal lesson times. The key findings regarding the manifestation of PK and PCK emerging
65
from the case of T5, were that expert content knowledge is essential for well-developed PCK, and
that knowledge of learners' understanding is vital for alignment of teaching strategies used. It can
therefore be affirmed from this observation, that content knowledge and congruency between
espoused theory and theory in action is important. Shulman's (1986: p.7) definition of PCK as the
"amalgam of content and pedagogy" has emerged as one of the central themes in this observation.
The observation has shown that pedagogy can ensure a functional classroom, but a deep
understanding of the content and knowledge of learner's understanding is essential for truly
effective teaching of technology.
4.3.2 Lesson observation T8
· The context
T8 teaches in a public fee paying school, Southfolk secondary within the Chatsworth west circuit.
Southfolk secondary has a student population of 600 and charges a school fee of R1200 per annum.
It is situated in a multiracial community dominated by Indians. The school is encapsulated by four
concrete walls of about 2 meters high with a manually operated steel gate manned by a security
guard at all times. The physical structure of the school is well maintained and the resources
available at this school make it conducive for learning. I arrived at the school during lunch break.
I was therefore, asked by T8 to wait under the tree as learners prepared to come back to class. It
was about 11:45 am (15 minutes to the start of the lesson). I joined T8 in his classroom prior to
the arrival of the learners and used that opportunity to take a look around. I went around observing
the classroom setting.
There was no physical evidence of the availability of any resources that are
used for lesson presentation. Materials such as posters, projectors, and computers were not found
in the classroom. The walls were bare and did not create a stimulating environment for learning.
Even though the school has had a reputation of having well maintained resources in technical
subjects in the past, the situation was the opposite in the classroom of T8. As a matter of fact, T8's
classroom was no different from that of an ordinary classroom in the school. The only items one
could find were a few models of mini PAT that had just been submitted by learners for assessment.
The projects were poorly constructed. The only resource used by T8 was a worksheet and
chalkboard illustrations.
· The lesson
Introduction stage
66
T8 did not have a master file for technology education nor any lesson plan for the lesson that was
going to be taught. He explained that he was a seasoned teacher and did not need any lesson plan
to teach; he bragged could teach "off the cuff" due to his years of experience as a teacher and
painstakingly mentioned that he had an advanced certificate in technology education unlike most
technology teachers who had no formal qualifications to teach technology education. Furthermore,
T8 stated the CAPS policy was filed in the office by the school administrator, and he did not need
to look at the document to teach or plan or be guided by it. . Once the learners settled down, he
distributed a worksheet right at the onset of the lesson and told learners the purpose of the lesson
which was to understand the different views (orthographic projection) of pictorial drawings as
well as its significance in the design process.
There was no engagement of learner during the introduction of the lesson.
Presentation stage
· Instructional Strategy
Analysis of the lesson observation revealed that T8 used only one instructional technique, namely
the telling method /lecture mode.
(T8) used telling method or lecture method for the delivery of his lesson as a means of directing
learners towards establishing the technique of identifying the various planes, the lines, the faces
and the points of a pictorial drawing on a multi-view drawing (pictorial drawing). According to
Anbessa (2012), the lecture method is best suited for achieving objectives of the lower-cognitive
type for dealing with basic facts and principles rather that the achievement of higher-cognitive
objectives normally associated with the design process. This means that the lecture method of
instructions does not encourage inquisitive or creative mind. Furthermore, it also does not provide
students with enough opportunities to practise their oral communication skills.
· Knowledge of technology curriculum and use of explanations
The content representations he used had limited variety, were not visually stimulating and did not
offer learners multiple ways of thinking about and visualizing pictorial drawings. T8 did not
engage learners to establish if they had any misconceptions in respect of the drawing they did in
grade 8 (you merely did sketches). In other words, he disregarded the sequential progression of
knowledge development as embraced in the CAPS policy document (DBE, 2011). T8 is a strict
67
teacher who does not allow room for learner discussion or peer-learning to take place when
learners are trying to label the drawings (There shouldn't be any talking). This means that students
are not allowed to
collaborate with other learners.
T8 does not realise that learners can learn from
each other and that the deepest learning happens when learners have the opportunity to practice
and obtain feedback from their peers. From the foregoing discussion, one can conclude that T8
has not made the shift in his teaching philosophy from teacher-centred classroom to a learner-
centred classroom as espoused by the CAPS policy document. T8's relies more heavily on his
knowledge of teacher-centred disciplined classroom. This finding corresponds to that of Lee
(1995) where she found that teachers with limited experience of learner-centred classroom
pedagogy often relied on strict classroom order and generally tended to avoid discussion activities
in class.
· Use of assessment strategies
It is interesting to note that T8 allowed very limited room for learner interaction and he sometimes
answered the questions that he posed to the learners (What would you see from `C'? You'll see
`12'). The implications are T8 does not allow learners' time to think about the questions posed
it seemed as if he was in a hurry to just get the lesson over and move on. As a result students were
not allowed to express themselves or ask important questions to direct their own learning. This
meant that questioning in class did not probe for deeper understanding and he did not elicit
learners' own opinions or prior knowledge. His explanations generally followed a procedural
approach and did not encourage learners to think deeply about the content. According to his
biographical data, T8 has been teaching for 27 years from a time when teacher-centred classrooms
were the order of the day. It is highly possible he finds it difficult to relinquish some of the power
associated with a teacher-dominated classroom. In other words in his current practice, he does not
espouse the philosophy of the policy in terms of learner-centred classrooms and constructivism.
Besides, the teacher takes the leading role in the telling or lecture method of teaching; he is limited
in his judgment regarding the understanding of his learners as he does not probe their prior learning
on drawings. T8's lecture mode of teaching has very little scope for students' activity; it is mostly
one-way communication; it doesn't consider the concept of individual differences and it is against
the principle of "active learning" or "learning by doing"; and it is less effective in stimulating
students' interest. The intricate nature of the topic, however, made it a bit challenging for learners
to cope with the activities.
· Knowledge of learners' understanding
68
T8 did not directly link the lesson to the relevant previous knowledge of the learner. He did not
conduct any form of evaluation to ascertain the previous knowledge of the learners before building
on it. The lesson was therefore presented based on the assumption that learners still remembered
what they were taught in grade 8 and that there were no misconceptions carried by the learners.
The excerpt below clarifies how T8 trivialized learners' prior learning.
OK! (Keeps on distributing the work sheets)
Right! Now from grade 8, when you did projects, you didn't do serious drawing. You merely did sketches
of all different things that you wanted to make., you know, wanted to make and you drew sketches of images
that you saw and you looked at your investigation you make sketches of that and you did simple working
drawings. But now as you get into grade 9 and grade 10 when you start EDG, you need to work with bigger
projects, you need to do drawings that are intricate. And you will only be able to do that if you know what
views you are looking at. When you pick up something in front of you, an object or a part, you need to see
and you need to see it in from all angles. Ok? Because there are things that if you look at it in front, are
not the same on the side, is not the same on the top, is not the same on the back or is not the same at the
other side. So you need to draw the different views of that. Now on the board we've got some drawings.
From the foregoing excerpt, It is obvious that T8 disregards the learning that occurred in grade 8
(you didn't do any serious drawing ... merely did sketches) and hence does not interrogate the
learners' prior knowledge in order to establish if misconceptions exist in the learners' knowledge.
During his lesson he came across as the figure of authority with knowledge to impart and learners
were construed as "sponges" waiting to absorb the imparted knowledge or as empty vessels
waiting to be filled as can be seen the excerpt below:
(Teacher goes around checking on learners).
What you going to do first is an exercise. Now they've given you an example there. They
give you the pictorial view; that's your views in there: ABCDE (points to the board).
Right? Now from there you will see you've got your front view. You've got front view. What
do you see in the front view? You see line `8'. Ok? You see er... `B'. On this side here you
see line `10'. Ok? C; you would see line `1'. Ok? D; you would see line 3 from your front
view ok? Then E; you will see line 2, because you just seeing the straight line. You not
seeing the line going at an angle. Now if you go to the top view, we look at the ..."
· How does T8's view of the design process influence his teaching of the design process?
As mentioned earlier in chapter 4A, T8's espoused theory of the design process is that it involves
critical and creative thinking. T8's espoused view of the design process alludes to him having a
69
learner-centred classroom. The interview conducted with T8 confirms that, in principle, he
embraces the idea of a learner-centred classroom as can be seen in excerpt below:
"you must alter your teaching strategy to cater for the learner so that at the end of the
lesson the learner must be able to understand what is there".
It is significant to note T8's espoused view of the design process as a learner-centred approach to
teaching has no bearing on the teaching approach he uses to teach the design process. In other
words, there is a huge mismatch between his espoused theory and theory in use. Even though T8
demonstrated that he was au fait with content knowledge in technology education, the teaching
strategies used to teach the content, which was about understanding the different views
(orthographic projection) of pictorial drawings, was not aligned to the outcomes of technology
education, thus making it impossible for learners to be involved in critical or creative thinking.
The kind of tedious activity learners were involved in does not promote active learning. He could
have altered his teaching strategy to make the lesson learner-centred in order to promote learner
participation, provoke thinking and allow for learner creativity. Tracing T8's biographical data
shows that his view or espoused theory could have been influenced by his past experience in the
industry, his ACE qualification in technology education or his attendance at training workshops
for the implementation of the technology curriculum. T8 is unable to blend pedagogical
knowledge with content knowledge. His teaching strategies (subject specific and topic specific
strategies) were different from what he had earlier on indicated in the semi-structured interview.
This is reflected in the excerpt below:
"I normally go back to er... indigenous knowledge which I think technology is based on.
And if you look at indigenous knowledge, although it is still in existence today, it is the
foundation of technology and I take my learners back to that stage and tell them to work
from very basics and look at what was done and er.. build on that and look at everything
else and at least you will be able to work and produce work that you are expected to
produce."
None of these strategies mentioned in the excerpt above were observed in T8's lesson. T8's lesson
has no direct bearing on his PCK regarding the design process. His PCK was not a reflection of
his stated orientation towards teaching as well as preparation and use of resources. Although the
lesson was initially intended to be constructivist (learner-centred) in nature, learners did not have
enough opportunity to engage in lesson activities. Again this was also contrary to T8's responses
in the semi-structured interview. The lesson observed was generally teacher-centred with no
group-centred interaction. This hampered the development of learner creativity and or autonomy.
70
The PCK of T8 (in this case the reading of multi-view drawings in the design process) was not a
guide to his instructional delivery decisions and strategies. As a result, learners could not
demonstrate understanding of the concept.
Resources in the form of educational technologies (projector, or computer) were not used in the
presentation. Nor were any other resources in the form of real objects or models and posters or
even improvised materials used in the lesson of T8. So far, the only form of evaluation that was
observed was the learners' responses to questions as the teacher was explaining the given
examples. Activities on the worksheets could not be evaluated as learners did not complete their
activity.
As pointed out by Shulman (1987), content knowledge alone does not bring about learning and
neither does pedagogical knowledge alone. It takes a balanced blend of the two (into PCK) to
bring about effective teaching and learning. This is because teaching is a complex and problematic
activity which goes beyond a simple transmission of concepts and skills from the teacher down
the line to the learner and that teaching requires many and varied on-the-spot decisions and
responses to the ongoing learning needs of students (William & Lockley, 2012).
4.3.3 Answering research question 2
To answer research question 2, "How do these views influence the teaching of the design process?"
the case of T5 and T8 were used. The case for T5 highlights that the teacher's view or espoused
theory of the design process is aligned with her teaching of the design process or her theory in use,
whilst the case for T8 brings to the fore the mismatch between his espoused theory of the design
process and his theory in use or practice. T5 is of the view that the design process is as an
interactive problem-solving activity based on teacher-given scenarios (problem identification) and
that it is a nonlinear process driven by evaluation and which forms the backbone of technology
education. She believes that the design process is used to structure the delivery of learning aims
and gives learners focus and direction towards the end product. She is of the view that her
understanding of the design process enables her to encourage learner autonomy (constructivism)
and systematic problem-solving. This view influenced her teaching in the following ways.
T5 tapped and linked learners' PCK to the new lesson. T5 used a Power Point presentation as well
as whole class discussion, demonstration, guided discovery and questioning techniques to arouse
and sustain learner interest in the lesson. There was indication of learner participation and
excitement during problem-solving activities (social constructivism). T5 catered for individual
differences by allowing fast learners to assist slow learners while at the same time engaging the
71
fast learners in extra activity. Teaching of the concept of gear was influenced by the teacher's own
understanding (content knowledge and pedagogical knowledge) of the concept. This was
specifically evidenced in the way that she explained the placing of the driver and the driven gear.
The lesson was evaluated and concluded. As seen across the analysis, T5's practice was largely
characterised by a didactic approach to teaching (Magnusson et al., 1999) where the focus was on
the transmission of information in a clear and logical way. Her explanations, worksheets and
representations presented the learners with the information that was required for the examination
and provided rules to help them remember the `facts'. Friedrichsen et al. (2009) found that, despite
a push for teachers to teach in a more progressive style, many teachers in their study were still
teaching from a strong didactic viewpoint. The importance of content knowledge has been
affirmed in this study. T5 affirms what was found by a number of studies into the crucial role that
content knowledge plays in PCK (Bishop & Denley, 1997; Hashweh, 2005; Lee, 1995; Rollnick,
Miller, & Butler, 2008).
The case of T8 elucidates the slippage between his view of the design process and his classroom
practice when engaging with the design process. This study shows that context exerts a very
powerful influence on what is possible, and logical, in a South African classroom. T8 has not
showed any willingness to change his practice ("I'm an experienced teacher ... I don't need ... I
can teach off the cuff") and was unable to include new strategies or embrace new philosophies in
his teaching. Therefore it can be concluded that the teacher's orientation to teaching plays a role,
but this is overarched by the contextual influences. T8's PCK was limited by his lack of knowledge
in two main areas knowledge of learners' understanding of drawings and the areas where they
might struggle and the reasons for their struggle, The importance of content knowledge has been
affirmed in this study. For example, teachers saw learning as acquiring a body of knowledge
(exemplified by their need to cover the syllabus/scheme of work); that the teacher had this
knowledge and that the learner did not ("I always take a lot of time [explaining] because [the
students] don't have any idea or knowledge about anything"). T8 sees the role of the teacher as
imparting this knowledge to the learner through various activities ("We have to keep on teaching
and explaining until they learn"). In the teachers' descriptions of an ideal teacher, the three most
common features were "explains clearly", "is knowledgeable" and "maintains discipline". None
of these relate directly to engaging students, improving learning or developing successful learners.
They focus on the teacher rather than highlighting the interaction of teaching and learning, and the
important role that the teacher plays in making this process a fruitful one. This, to me, is indicative
of the teachers' view that learning occurs in a linear process, dependent solely on the actions of
the teacher. The teacher appeared to be concerned more about classroom management issues than
72
teaching approaches or the learning process. T8's hesitancy to adopt more learner-centred
techniques such as encouraging group discussions among learners stemmed from his fear of
disruption and losing control of the class. T8 regarded classroom management as a necessary and
sufficient condition for learning to occur.
The way a teacher may teach the design process is influenced by their views which are in turn
influenced by their PCK. This is because the views expressed by the individual teachers (T5 and
T8) were a reflection of their PCK which also translated into teaching and learning of the design
process. It can therefore be said that the views of the technology education teacher have an impact
on their teaching of the design process.
4.4 CHAPTER SUMMARY
This chapter presented the data analysis for the study. It was in two parts (part A and part B). Part
A was the analysis of the research questionnaire as well as the semi-structured interviews. The
intention of the analysis was to obtain information that could answer the first research question of
the study (What are Grade 9 technology teachers' views of the design process?). Two different
views were identified. These were: Design process as problem-solving and Design process as a
step-by-step process that provides "comfort" to learners during problem-solving. It was found that
these views were shaped by the PCK of the teachers.
Part B of the analysis sought answers to the second research question of the study (How do these
views influence their teaching of the design process?). It was found that the views of the teachers
influence the way they teach the design process and that the views expressed by the individual
teachers were a reflection of their PCK which also translated into teaching and learning of the
design process. In the next chapter, I discuss the implications of the finding of this study for teacher
development.
73
CHAPTER 5
CONCLUSIONS AND RECOMMENDATIONS
5.1 INTRODUCTION
The analysis of the data collected to answer research question 1 illuminated that Grade 9
technology teachers had two distinct views of the design process, namely: Design process as
problem-solving and Design process as a step-by-step process that provides "comfort" to learners
during problem-solving. T5 espoused a dual view of the design process as problem-solving as well
as a step-by-step process, whilst T8 is of the view that the design process involves critical and
creative thinking. T5 and T8 were purposively selected for phase two of data collection, in order
to answer research question 2: How do teachers' views of the design process influence their
teaching of the design process? To determine how these views on the design process impact the
teaching of the design process, I drew on Singh-Pillay's (2010) notion of interface. According to
Singh-Pillay, the interface is a meeting point that arises from juxtaposing elements or views.
Interfacing T5's espoused theory on the design process (from the semi-structured interview) with
her theory in use (from the observation of the lesson and post-observation interview) revealed that
her espoused theory was directed at two levels: at the level of subject specific strategies (design
process is iterative) and at the level of topic specific strategies (design process is a step-by-step
process) and that one could see congruence between her espoused theory and theory in use.
The
analyses indicated that her pedagogical knowledge manifested quite strongly in her practice and
was supported by her in-depth PCK. She understood her learners, was au fait with the content and
examination requirements in technology education and responded by preparing her learners for
the high stakes examination at the end of the year. Her teaching was framed by what she believed
good teaching to be. She reflected on her practice, and it enabled her to use different teaching
strategies for the benefit of her learners. T5's case study illuminates that growth and congruency
can occur between espoused theory and theory in action provided the individual teacher is
prepared to change /adjust their mental maps that guide their actions.
T8's espoused view of the design process as a learner-centred approach to teaching has no bearing
on the teaching approach he uses to teach the design process. In other words there is a huge
mismatch between his espoused theory and theory in use. This means there is dissonance between
T8's statements about teaching and his descriptions of his own practice and his real practice. Even
though T8 demonstrated he was au fait with content knowledge in technology education, the
teaching strategies used to teach the content on orthographic projection of pictorial drawings were
74
not aligned with his espoused views of the design process thus making it impossible for learners
to be involved in critical or creative thinking. The major finding of this study is that not all
technology teachers apply their espoused view of the design process in their teaching of the design
process. Thus the challenge of getting congruence between teachers' espoused theories and their
theories-in-use is taken up in this chapter as part of the discussion and the significance of the case
study is brought to bear.
I also outline recommendations that are based on the findings for appropriate action to be taken to
address the gaps between grade 9 technology teachers' views of the design process and their
teaching practice of the design process. The limitations of the study are elucidated and suggestions
for further research are presented.
5.2 IMPLICATIONS OF THIS STUDY
5.2.1 Reflective practice
In this section I look at the intricate, intertwined relationship between espoused theory and theory
in action in order to see how teachers can integrate theory and practice and thereby design a
learning environment that can contribute to that integration.
Conflicts and dilemmas occur when theories in action and realities of practice clash and this may
initiate change and development of teaching (Argyris & Schön, 1974). Essential improvements to
the quality of teaching and learning are more likely if teachers have an understanding of the link
between espoused theory and theory of action, and can assess whether their espoused theories are
congruent, or incongruent, with their actual practice (Kane, Sandretto, & Heath, 2002). In this
regards, Baxter and Lederman (1999) state that PCK is not limited to what a teacher knows about
teaching a specific topic but it also refers to "what a teacher does" in the classroom, and the reasons
for the types of actions that he/she takes in relation to teaching a specific topic. Therefore, it is
important to establish an explicit link between teachers' knowledge and classroom practice and
explore factors that facilitate or impede teachers' enactment of PCK in the classroom. Teachers
appear to hold personal conceptions of teaching and learning that presumably have an influence
on how they teach, which also influence their learners' approach to learning and in turn affect
learning outcomes (Kember, 1997; Trigwell, Prosser, & Waterhouse, 1999). Academic developers
therefore often work on the assumption that enhancing learners' learning by altering approaches
to teaching requires that teachers' conceptions of teaching be changed as well (Ho, 2000). A
change in approach will not happen without a change in conceptions of teaching (Kember, 2009).
75
Some teachers think of teaching as being about imparting information and transmitting knowledge
to their learners; these teachers are best characterised as having teacher-centred/content-oriented
approaches to teaching. Others conceive of teaching in terms of helping students to develop
conceptions, and of helping to facilitate learning. These are said to have student-centred/learning-
oriented approaches to teaching.
Notwithstanding, Thiessen (2000) contends there are two
elements that can assist with the integration of theory and practice, namely, reflective practice and
development of professional knowledge. Thiessen maintains the reflective practices orientation
concentrates on skills which help teachers think through what they have done, are doing or are
about to do.
5.2.2 Professional development
If change is to be sought at the chalk face, then teacher pre-service preparation programmes and
more critically, ongoing professional development programmes for in-service teachers in South
Africa would have to focus more on the development of content knowledge, specifically
conceptual knowledge. A deep understanding of the content and how to teach it was shown to be
essential in the teaching endeavour. This study further showed that curriculum materials have the
potential to impact classroom practice. However, these need to be accompanied by training
sessions which address the development of pedagogical content knowledge rather than purely
providing implementation or examination support. South Africa already has a number of such
initiatives to support teachers. An example is the various Provincial Education Departments'
professional development programmes. These programmes, however, need to be expanded.
Furthermore, these programmes need to provide ongoing support over an extended period of time.
In addition to curriculum resources, the value of human resources, like expert colleagues or
mentors cannot be underestimated and these should form part of professional development
programmes at a ward level. The research on Lesson Studies (Lewis, Perry & Hurd, 2004) is one
example where such programmes, which incorporate planning, doing and reflection with
colleagues, have led to successful teacher development. The findings of this study confirm that
some experienced teachers are set in their instructional strategies and that these teachers need to
learn how to engage in reflective practice in a supportive environment.
5.2.3 Resourcefulness
The resourcefulness of a teacher in preparation for a lesson delivery is also motivated and shaped
by their PCK. A teacher like T5 who sees the need to produce and use colorful eye-catching
resources in lesson delivery has a rich PCK. Unavailability of such resources is not a limiting
factor to such a teacher. This is because they also have the ability to improvise using readily
76
available and easily obtainable everyday materials. A teacher with a rich PCK will surely deliver
irrespective of the learning environment. It has therefore been noticed that the view of the teacher
is a reflection of their PCK and that such views may or may not translate into both lesson
preparation and lesson presentation in the design process.
5.2.4 Learner autonomy/ creativity
Even though there was an indication of problem-solving the dominance of the teachers reflected
in their incessant explanation of concepts did not allow enough time for leaners to solve problems
with minimal guidance as suggested by Mawson (2003). The teachers observed employed
instructional approaches that placed a strong emphasis on guidance of the student learning process
in line with Kirschner, Sweller, and Clark (2006) and to provide learner comfort during problem-
solving (Hansen, 1993).
5.2.5 Collaborative learning and problem-solving
Even though the problem-solving activity in design and technology has been seen as a potentially
rich arena for collaborative learning (Hennessy & Murphy, 1999), this was not always the case in
the lessons observed. T8 did not provide opportunities for collaborative learning among learners.
He used orders such as: "Foster, why are you going there to look at her work? You sit down and
do your own work. You wanna ask, you ask me!". The seating plan was so regimented that each
learner had to mind his/her own work. This was a serious hindrance to social constructivism since
no opportunity was allowed for learner-learner interaction. In a situation where there was some
kind of group activity (T5), such activities did not involve group interaction. Rather individual
learners were called forward to solve problems on behalf of their respective groups while other
group members sat and looked on. The teacher who sees the design process as a step-by step
problem-solving process is more dominating in his lesson delivery. Lessons were presented in
steps to ensure that students understood every step of the way. This deprived many learners the
opportunity to solve problems in their own way. The lessons were but a teacher centred interaction
where learners get less opportunity to solve problems autonomously and collaboratively.
5.3 RECOMMENDATIONS
In line with the findings of this study some recommendations have been outlined to improve the
teaching and learning of technology education. The recommendations relate to curriculum design
and implementation, teacher interference during the design process, professional development of
teachers, research, and collaborative learning.
77
5.3.1 Curriculum design and implementation
The role of the teacher is crucial in the implementation of curriculum reforms and innovations
(Zipf & Harrison, 2003). Their views therefore form part of the factors that determine the success
or failure of the education system of any country. It is therefore necessary that teachers are
involved not only in the implementation of the curriculum but also in its planning and
development. A curriculum policy that will survive the test of time should also take cognisance of
the views of its implementers.
Curriculum developers should lighten the emphasis that is placed on assessment of a product or
the end solution. The means through which the solution was reached should rather receive more
attention and assessment. Learners should be assessed more on what they did when trying to solve
the problem and not the nature or quality of the solution. The views of learners should be respected
regarding which approach they choose in solving a problem. A learner who feels like solving their
problem in an interactive way should not be prevented from doing so, and so is the one who prefers
to do it in a sequential manner. This is because there are as many possible approaches of solving
a particular problem as there are many design briefs for the same problem (Flowers, 2010). Just
as different researchers suggest different approaches to problem-solving, so too do learners. The
curriculum should therefore provide more options for learners to design and or solve problems
freely.
5.3.2 Teacher interference
Although the teacher's occasional interruption in design problem-solving might improve ideation
productivity (Howard- Jones, 2002) and build up the strong symbiosis that exist between teaching
and learning (Hartfield, 2012), the extent of teacher interruption in problem-solving in a lesson
should also be regulated. How a problem is solved should be free from teacher biases or
dictatorship. The teacher should only be available to address learners' challenges during problem-
solving and not to impose their own views on learners. This hampers the development of the
creative potentials in learners and lead to idea fixation (Rutland, 2009). This is because, as stated
in the teachers' own responses, learners have their own inborn talents that stimulate creativity in
their problem-solving process.
5.3.3 Professional development
Inasmuch as PCK is seen to be a byproduct of experience and practice, it is also paramount that
further education for the professional development of teachers of the subject (Technology) be
provided. This is because many of the technology teachers, as shown in the biographical data still
78
use their knowledge in industrial arts to teach technology today (Pool, Reitsma & Mentz, 2013;
Stevens, 2006). This places more emphasis on the making of a product at the expense of the
process emphasis. There should be frequent in-service training for technology education teachers
to address issues of concern in the implementation of the new curriculum. Teachers should be
encouraged to attend relevant conferences on technology education and for that matter the design
process. By doing so, teachers have contact with colleagues and are able to share ideas (Dekker &
Feijs, 2005). Professional development should focus on teaching technology applying the design
process.
5.3.4 Designing in groups
Group work that ensures effective member participation should be encouraged as this has the
potential to support students' creativity (Webster et al., 2006). It has also been observed by Doise
and Mugny (1984) and cited in (Donald, Lazarus, & Lolwana, 1997) that "under the right
conditions, students solving problems in pairs and small groups can promote one another's
cognitive development". Effective group work in which every group member has a role to play
should therefore be encouraged in problem-solving activities in technology education.
5.4 LIMITATIONS OF THE STUDY
Major limiting factors which might have had a negative impact on the findings of the study have
been identified by the researcher. In the first place, the study was limited within the confines of
the Chatsworth west circuit and that the findings are also from the Chatsworth West circuit only.
Generalising the findings to represent the entire country (South Africa) might not be possible.
Another limitation was that not all the teachers initially earmarked for the study participated. Some
four teachers out of the fourteen opted to drop out of the study and this reduced the number of
respondents. As a result, the findings may not be representative of all the technology teachers'
views within the Chatsworth west circuit.
Another factor that might have had a negative impact on the research findings was time. The data
collection activities coincided with the examination season of the schools involved. In most
instances, respondents rescheduled the meeting with the researcher citing workload-related
reasons. During the semi-structured interview sessions, respondents were always in a rush to get
back to their respective classrooms to continue with their work. The number of lesson observations
per respondent had to be reduced to one from two due to time constraints. This was in response to
the fact that respondents were not readily available due to their tight work schedules. As a result,
79
respondents might not have had the chance to put all the views expressed on the design process
into action in a single lesson.
Existing literature together with the personal experiences of the researcher indicate that the design
process is not a simple concept which can be presented in its entirety within a single lesson.
Observing a single lesson per teacher is therefore not enough to cover the various aspects of the
design process and this might have affected the findings of the study.
5.5 RECOMMENDATIONS FOR FURTHER RESEARCH
· Further research should be conducted to ascertain the relevance and effectiveness of current
teacher training programmes in technology education in South Africa. This will expose areas
that need amendments so as to bring the knowledge of newly-trained technology teachers in
line with the current curriculum for its successful implementation.
· The frequency and effectiveness of technology teacher workshops should also be researched
in order to identify ways of making them more effective for the benefit of teachers, learners
and all stakeholders of education. This study should involve the subject specialist as well as
the subject teachers themselves.
5.6. CONCLUSION
Just as it is in many other countries, the introduction of technology education has been faced with
many challenges including availability of resources and policy implementation. The shift away
from the industrial arts style of teaching (Zuga, 1989) to the present method of problem solving
has posed challenges to teachers of the subject as a result of the difficulty and or the uncertainty
they encounter during the implementation of the design process. The views of the teacher are
crucial to the implementation of the curriculum and that such view is shaped by the PCK of the
technology teacher (Shulman, 1987). This research studied the views of the technology teacher
and how such views influence their teaching of the design process.
Data collection was in two phases. The first phase sought to collect data on the views of the grade
9 technology teacher of the design process using questionnaire and semi structured interviews as
instruments for data collection. In the second phase lessons were observed to see how the teachers
present the design process to their learners and to compare their practice with their views.
Some limiting factors which might have had a negative impact on the findings of the study were
identified by the researcher. These include the fact that the study was confined within a limited
geographical area and that generalizing the findings within the context of the entire South Africa
80
might defeat the reliability and trustworthiness of results. Another limiting factor was the decision
of some participants to opt out of the study thereby reducing the number of respondents. Time
constraint was also identified to be another limitation and that the number of lessons observed was
inadequate to satisfactorily unpack the complex nature of the design process and how it unfolds in
the classroom context.
The views and practices of the teachers were analysed and the findings were interrogated in the
light of Shulman's PCK and the theories of human action (espoused theory and theory in use) as
outlined by Argyris and Schön (1974). Two views of the design process were identified after the
analysis of the first phase of data collection. These were:
· Design process as problem solving
· Design process is a step-by-step process that provides "comfort " to learners during problem
solving
It was found that most of the technology teachers within the Chatsworth circuit viewed the design
process as a step-by-step problem solving that caters for learner comfort whereas others had a duel
view of the design process to be both iterative as well as being a set of procedures to be followed.
During the lesson observations it came out that T5 demonstrated congruency between her
espoused theory and her theory in use. The opposite happened in the case of T8 who demonstrated
a remarkable mismatch between his responses in the focus group interview and what he actually
did in his lesson presentation. It can therefore be concluded that different grade 9 technology
teachers in the Chatsworth west circuit have different views of the design process and that their
individual views may not always influence their teaching of the design process. This is because
their individual espoused theories may not always be in congruence with their theory in action.
The findings of the study have both direct and indirect implications on the teaching and learning
of the design process in technology education. These include implications on reflective practice,
professional development, resourcefulness, learner autonomy as well as collaborative learning
Some recommendations relating to curriculum design and implementation, teacher interference
during the design process, professional development of teachers, further research, and
collaborative learning have also been outlined. It has been suggested that further research should
be conducted to ascertain i; the relevance and effectiveness of current teacher training programmes
in technology education in South Africa, ii; the frequency and effectiveness of technology teacher
workshops so as to identify ways of making it more effective for the benefit of teachers, learners
and all stakeholders of education.
81
REFERENCES
Anbessa, B. N. (2012). Methods of Teaching and their Implications for Quality of Student Learning at
Samara University.
Anderson, G., & Arsenault, N. (1998). Fundamentals of Educational Research. London: The
Falmer Press.
Argyris, C. (1980). Inner contradictions of rigorous research. New York: Academic Press.
Argyris, C., Putnam, R. T., & Smith, D. M. (1985). Action science. San Francisco: Jossey-Bass.
Argyris, C., & Schön, D. (1974). Theory in Practice San Franasco: Jossey Bass.
Asik, A. (2010). Misconceptions on learner autonomy: A methodological and conceptual renewal. Ekev
Akademi Dergisi, 43, 141-153.
Atkinson, S. (2011). Perspectives on Learning in Design & Technology Education. Paper presented at the
PATT25:CRIPT 8 conference, London.
Atkinson, S. (2012). Exploration of best practices in Technology, Design & Engineering Education. Paper
presented at the 7th Biennial International Conference on Technology Education Research, The
Crowne Plaza Surfers Paradise, Australia.
Atkinson, S., & Sandwith, A. (2014). Passionate about designing. Int J Technol Des Educ, 24, 163-168.
Bailey, P. (2012). Technology Education in the 21st Century. Paper presented at the The PATT 26
conference, Stockholm, Sweden.
Ball, D. L., Hill, H. C., & Bass, H. (2005). Knowing mathematics for teaching: Who knows mathematics
well enough to teach third grade, and how can we decide? American Educator, 29(3), 14-46.
Baxter, J. A., & Lederman, N. G. (1999). Assessment and measurement of pedagogical content
knowledge Examining pedagogical content knowledge (pp. 147-161): Springer.
Bell, J. (1993). Doing your research project. A guide for first-time researchers in Education and Social
Science. Philadelphia: Open University Press.
Bertram, C. (2003). Understanding research: An introduction to reading research (2nd ed.). Durban:
School of Education and Development, Faculty of Education, University of KwaZulu-Natal.
Bishop, K., & Denley, P. (1997). The fundamental role of subject matter knowledge in the teaching of
science. School Science Review, 286, 65-71.
Bishop, K., & Denley, P. (2007). Learning science teaching. Berkshire, England: Open University Press.
Blanche, M. J. T., Blanche, M. T., Durrheim, K., & Painter, D. (2006). Research in practice: Applied
methods for the social sciences: Juta and Company Ltd.
Bodner, G. M. (1986). Constructivism: A Theory of Knowledge. Journal of Chemical Education, 63, 873-
878.
Borko, H., & Putnam, R. T. (1996). Learning to teach. In D. C. Berliner & R. C. Calfee (Eds.), Handbook of
educational psychology (pp. 673708). New York, NY: Macmillan.
Burghardt, M. D., & Hacker, M. (2004). Informed design: A contemporary approach to design pedagogy
as the core process in technology. Technology teacher, 64(1), 6-8.
82
Carlson, J. A. (2010). Avoiding traps in member checking. The Qualitative Report, 15(5), 1102-1113.
Retrieved from
http://www.nova.edu/ssss/QR/QR15-5/carlson.pdf
website:
Carrim, N. (2004). Teacher Identity: Tension between Roles. In K. Lewin, M. Samuel & Y. Sayed (Eds.),
Changing Patterns of Teacher Education in South Africa Policy, Practice and Prospects. Cape
Town: Heinemann.
Cobern, W. W. (1995). Constructivism for science teachers. Science Education International, 6(3), 8-12.
Cochrane, K. F., De Ruiter, J. A., & King, R. A. (1993). Pedagogical content knowing: An integrative model
for teacher preparation. Journal of Teacher Education, 44(4), 263-272.
Cohen, L., Manion, L., & Morrison, K. (2007). Research Methods in Education (6th ed.): Routledge
Publishers.
Cohen, L., Manion, L., & Morrison, K. (2011). Research methods in education. London: Routledge Falmer.
Creswell, J. W., & Miller, D. L. (2000). Determining validity in qualitative inquiry. Theory into practice,
39(3), 124-130.
DBE. (2011). Curriculum and Assessment Policy Statement (CAPS). Pretoria: Government Printing
Works.
Dekker, T., & Feijs, E. (2005). Scaling up strategies for change: Change in formative assessment
practices. Assessment in Education, 12(3), 237-254.
Denscombe, M. (2003). The good Research Guide for small-scale social research projects. Buckingham:
Bell & Bain.
Dineen, R., Samuel, E., & Livesey, K. (2005). The promotion of creativity in learners: theory and practice.
Art, Design & Communication in Higher Education, 4(3), 155-172.
DoE. (2002). Revised National Curriculum Statement. Pretoria: Department of Education.
DoE. (2009). Report of the Task Team for the Review of the Implementation of the National Curriculum
Statement. Pretoria.
Doise, W., & Mugny, W. (1984). The Social Development of the Intellect. Oxford: Pergamon Press.
Donald, D., Lazarus, S., & Lolwana, P. (1997). Educational Psychology in social context: Challenges of
development, social issues, & special need in southern Africa. Cape Town: Oxford University
Press.
Dorst, K., & Cross, N. (2001). Creativity in the design process: co-evolution of problemsolution. Design
Studies, 22(5), 425-437. doi:
http://dx.doi.org/10.1016/S0142-694X(01)00009-6
Flowers, J. (2010). The Problem in Technology Education (A Definite Article). Journal of Technology
Education, 21(2), 10-20.
Flyvbjerg, B. (2006). Five Misunderstandings About Case-Study Research. Qualitative Inquiry, 12(2), 219-
245.
Friedrichsen, P. J., Abell, S. K., Pareja, E. M., Brown, P. L., Lankford, D. M., & Volkmann, M. J. (2009).
Does teaching experience matter? Examining biology teachers' prior knowledge for teaching in
an alternative certification program. Journal of Research in Science Teaching, 46(4), 357-383.
Frith, A. (2014). census2011.adrianfrith.com/place/599161001. Retrieved October 28, 2014
83
Geddis, A. N., Onslow, B., Beynon, C., & Oesch, J. (1993). Transforming content knowledge: Learning to
teach about isotopes. Science Education, 77(6), 575-591.
Gess-Newsome, J. (1999). Pedagogical content knowledge: An introduction and orientation. In J. l. L.
Gess-Newsome, N. G. (Ed.), Examining pedagogical content knowledge (pp. 3-17). Dordrecht,
The Netherlands: Kluwer Academic Publishers.
Grossman, P. L. (1990). The making of a teacher: Teacher knowledge and teacher education. New York:
Teachers College Press.
Hämäläinen, R., & Vähäsantanen, K. (2011). Theoretical and pedagogical perspectives on orchestrating
creativity and collaborative learning. Educational Research Review, 6, 169-184.
Hansen, R. E. (1993). A Technological Teacher Education Program Planning Model. Journal of Technology
Education, 5(1), 21-28.
Hartfield, S. (2012, 5-8 December). Controls behind the scenes: On Position, Ideology, and Expectations.
Paper presented at the 7th Biennial International Conference on Technology Education
Research, Crowne Plaza Surfers Paradise, Australia.
Hashweh, M. Z. (2005). Teacher pedagogical constructions: A reconfiguration of pedagogical content
knowledge. Teachers and Teaching: Theory and Practice, 11, 273-292.
Hatch, J. A. (2002). Doing qualitative research in education settings. Albany, New York: SUNY Press.
Hennessy, S., & Murphy, P. (1999). The Potential for Collaborative Problem Solving in D&T. International
Journal of Technology and Design Education, 9(1), 1-36.
Hill, A., M. (1998). Problem Solving in Real-Life Contexts: An Alternative for Design in Technology
Education. International Journal of Technology and Design Education, 8, 203-220.
Ho, A. S. P. (2000). A conceptual change approach to staff development: a model for programme design.
International Journal of Academic Development, 5(1), 30-41.
Holec, H. (1979). Autonomy and Foreign Language Learning: ERIC.
Joan, D. R. (2013). Flexible Learning As New Learning Design In Classroom Process To Promote Quality
Education. i-manager's Journal on School Educational Technology, 9(1), 37-42.
Johnson, S., D., & Daughterty, J. (2008). Quality and Characteristics of Recent Research in Technology
education. Journal of Technology Education, 20(1), 16-31.
Jones, A., Buntting, C., & De Vries, M. (2011). The developing field of Technology Education: a review to
look forward The International Journal of Technology and Design Education. Netherlands:
Kluwe.
Kane, R., Sandretto, S., & Heath, C. (2002). Telling half the story: A critical review of research on the
teaching beliefs and practices of university academics. Review of educational research, 72(2),
177-228.
Kangas, K., Seitamaa-Hakkarainen, P., & Hakkarainen, K. (2013). Design expert's participation in
elementary students' collaborative design process. International Journal of Technology and
Design Education, 23(2), 161-178.
Kember, D. (1997). A reconceptualisation of the research into university academics' conceptions of
teaching. Learning and instruction, 7(3), 255-275.
84
Kember, D. (2009). Promoting Student-Centred Forms of Learning Across an Entire University. Higher
education, 58(1), 1-13.
Kirschner, P. A., Sweller, J., & Clark, R. E. (2006). Why Minimal Guidance During Instruction Does Not
Work: An Analysis of the Failure of Constructivist, Discovery, Problem-Based, Experiential, and
Inquiry-Based Teaching. EDUCATIONAL PSYCHOLOGIST, 41(2), 75-86.
Kuhn, T. (1996). The structure of scientific revolutions (3rd ed.). Chicago: University of Chicago Press.
Kumar, R. (2005). Research methodology. A Step-by-step guide for beginners. London: Sage Publications.
KZNDBE. (2012). KZN Address List 2012.xls.
http://www.kzneducation.gov.za/Portals/0/EMIS/KZN%20Address%20List%202012.xls
Retrieved 7 March, 2014, from KZN Education
Lawson, B. (2006). How designers think: The design process demystified (4th ed.). Oxford:
Elsevier/Architectural.
Lee, O. (1995). Subject matter knowledge, classroom management, and instructional practices in middle
school science classrooms. Journal of Research in Science Teaching, 32, 423-440.
Lewis, C., Perry, R., & Hurd, J. (2004). A deeper look at lesson study. Educational Leadership, 61(5), 18-
23.
Lorsbach, A., & Tobin, K. (1992). Constructivism as a referent for science teaching. NARST Newsletter,
30, 5-7.
Lovington, D. S. (2009). Problems experienced by educators in the training of technology at Etwatwa
schools. Retrieved from
http://152.106.200:8080/dspace/handle/10210/2013
website:
Magnusson, S., Krajcik, J., & Borko, H. (1999). Nature, sources, and development of pedagogical content
knowledge for science teaching Examining pedagogical content knowledge (pp. 95-132):
Springer.
Mapotse, T. A. (2012). The teaching practice of senior phase Technology Education teachers in selected
schools of Limpopo Province: an Action Research study.
Maree, K. (Ed.). (2007). First Steps in Research. Pretoria: Van Shaik.
Mawson, B. (2003). Beyond 'The Design Process': An Alternative Pedagogy for Technology Education.
International Journal of Technology and Design Education, 13, 117-128.
Mawson, B. (2007). Designers as Teachers and Learners: Transferring Workplace Design Practice into
Educational Settings. International Journal of Technology and Design Education, 17, 163-177.
Maxwell, J. A. (1998). Designing a qualitative study. Handbook of applied social research methods, 69-
100.
Mcmillan, J. H., & Schumacher, S. (2010). Research in education: Evidence based inquiry. New Jersey:
Pearson Press.
Mioduser, D., & Dagan, O. (2007). The effect of alternative approaches to design instruction (structural
or functional) on students' mental models of technological design processes. International
Journal of Technology and Design Education, 17(2), 135-148.
Nkosi, D. F. (2008). Technological process as a framework for the improvement of instruction of
technology. (MEd), University of Johannesburg, Johannesburg.
85
Norström, P. (2014). How technology teachers understand technological knowledge. Int J Technol Des
Educ (2014) 24:1938, 24, 19-38.
Novak, J. D. (1993). How do we learn our lesson? Science Teacher, 60(3), 50-55.
Park, S., & Chen, Y. C. (2012). Mapping out the integration of the components of pedagogical content
knowledge (PCK): Examples from high school biology classrooms. Journal of Research in Science
Teaching, 49(7), 922-941.
Park, S., & Oliver, J. S. (2008). Revisiting the conceptualisation of pedagogical content knowledge (PCK):
PCK as a conceptual tool to understand teachers as professionals. Research in Science
Education, 38(3), 261-284.
Pool, J., Reitsma, R., & Mentz, E. (2013). An evaluation of Technology teacher training in South Africa:
shortcomings and recommendations. Int J Technol Des Educ, 23, 455-472.
Potgieter, C. (2004). The impact of the implementation of technology education on inservice teacher
education in South Africa. International Journal of Technology and Design Education, 14, 205-
218.
Potgieter, C. (2012). Teaching Practice trends regarding the teaching of the design process within a
South african context: a situation analysis. i-manager's Journal on School Educational
Technology, 23, 953-968.
Pudi, T. I. (2007). Understanding technology education from South African perspective. Pretoria: Van
Schaik.
Rauscher, W. (2010). The technological knowledge used by technology education students in capability
tasks. International Journal of Technology and Design Education, 21, 291- 305.
Reitsma, G., & Mentz, E. (2009). In-service training for technology teachers: A needs assessment. African
Journal of Research in Mathematics, Science and Technology Education, 13(2), 15-29.
Richmond, G., & Anderson, C. W. (2003). The Nature of Tensions between Educator and Teacher
Candidate Beliefs about Science Teaching Practice. Paper presented at the Annual Meeting of
the National Association for Research in Science Teaching, Philadelphia.
Robson, C. (1993). Real world research: a resource for social scientists and practitioner researchers.
Cambridge, USA: Blakewell.
Rohaan, E., Taconis, R., & Jochems, W. (2010). Reviewing the relations between teachers' knowledge
and pupils' attitude in the field of primary technology education. International Journal of
Technology and Design Education, 20(1), 15-26.
Rollnick, S., Miller, W. R., & Butler, C. C. (2008). Motivational Interviewing in Health Care. New York:
Guilford Press.
Rowel, P. M. (2004). Developing Technological Stance: Children's Learning in Technology Education.
International Journal of Technology and Design Education., 14, 45-59.
Rutland, M. (2009). Art and design and design and technology: Is there creativity in the designing?
Design and Technology Education: An International Journal, 14(1), 56-67.
Schön, D. A. (1983). The reflective practitioner: How professionals think in action. New York: Basic Books.
Schön, D. A. (1987). Educating the reflective practitioner: Toward a design for teaching and learning in
the professions. San Francisco: Jossey-Bass.
86
Sharan, B. M. (2009). Qualitative research. A guide to design and implementation. California: Jossey
Bass.
Shulman, L. S. (1986). Those who understand: Knowledge growth in teaching. Educational Researcher,
15(2), 1-14.
Shulman, L. S. (1987). Knowledge and Teaching: Foundation of the New Reforms. Havard Educational
Review, 57(1), 1-21.
Singh-Pillay. (2010). An exploration of the Interphase Between Schools and Industry in respect of the
Development of Skills, Knowledge, Attitude and Values (SKAV) in the context of Biotechnology.
(PhD), University of Kwazulu Natal, Edgewood.
Smith, W. H., & Gray, R. C. (2009). Technological Design: An Introduction. Technological Design, 1-7.
Retrieved from
www.iteaconnect.org/.../td_overview.pdf
website:
Stake, R. E. (2000). Case Studies. In N. K. Denzin & Y. S. Lincoln (Eds.), Handbook of Qualitative Research
(pp. 435-454). Thousand Oaks, CA: Sage.
Stevens, A. (2006). Technology Teacher Education in South Africa. In M. de Vries & I. Mottier (Eds.),
International Handbook of Technology Education: Reviewing the past twenty years (pp. 1-10):
Rotterdam: Sense.
Tamir, P. (1988). Gender differences in high school science in Israel. British Educational Research
Journal, 14, 127-140.
Thiessen, D. (2000). A skillful start to a teaching career: a matter of developing impactful behaviors,
reflective practices, or professional knowledge? International Journal of Educational Research,
33(5), 515-537.
Tholo, J. A. T., Monobe, R. J., & Lumadi, M. W. (2011). What do boys and girls think about Technology? .
US-China Education Review, USA, 8(12).
Thomas, D. R. (2006). A General Inductive Approach for Analyzing Qualitative Evaluation Data. American
Journal of Evaluation, 27(237), 237-246.
Thorne, S. (2000). Data analysis in qualitative research. EBN NOTEBOOK, 3, 68-70. Retrieved from
ebn.bmj.com website:
Trigwell, K., Prosser, M., & Waterhouse, F. (1999). Relations between teachers' approaches to teaching
and students' approaches to learning. Higher education, 37(1), 57-70.
Vygotsky, L. S. (1978). Mind in Society: The development of higher psychological processes. Cambridge,
MA: Harvard University Press.
Webster, A., Campbell, C., & Jane, B. (2006). Enhancing the Creative Process for Learning in Primary
Technology Education. International Journal of Technology and Design Education, 16, 221-235.
Wenglinsky, H. (2002). The Link between Teacher Classroom Practices and Student Academic
Performance. education policy analysis archives, 10(12), n12.
William, J., & Lockley, J. (2012). Using CoRes to develop the Pedagogical Content Knowledge (PCK) of
Earyly Career Science an. Journal of Technology Education, 24(1), 34-53.
Williams, P., J. (2000). Design: The Only Methodology? Journal of Technology Education, 11(2), 48-60.
87
Wong, Y. L., & Siu, K. W. M. (2012). A model of creative design process for fostering creativity of
students in design education. Int J Technol Des Educ, 22, 437-450.
Yin, R. K. (Ed.). (2009). Case Study Research: Design and Methods (4th ed.). Thousand Oaks CA: Sage
Publications.
Zipf, R., & Harrison, A. (2003). The terrarium unit: A challenge to teachers' concepts of what is science
teaching. Paper presented at the Anual meeting of the American Educational Research
Association, Chicago.
Zuga, K. F. (1989). Relating technology Education Goals to Curriculum Planning. Journal of tTechnology
Education, 66(3), 1-14.
88
Appendix 1: Participants' informed consent
School of Education, College of Humanities,
University of KwaZulu-Natal,
Edgewood Campus,
Dear Participant
INFORMED CONSENT LETTER
My name is Frank
Ohemeng-Appiah,
I am a Masters candidate studying at the University of KwaZulu-
Natal, Edgewood campus, South Africa.
I am interested in learning about Grade 9 technology teachers' perceptions of the design process.
To gather the information, I will be asking you some questions via a questionnaire and a focus group
interview. In addition I also require permission to video record and observe you teach the design process
in a grade 9 technology class.
Please note that:
· Your confidentiality is guaranteed as your inputs will not be attributed to you in person, but
reported only as a population member opinion.
· The questionnaire will take 10 minutes to answer and interview may last for about 30 minutes and
may be split depending on your preference.
· Any information given by you cannot be used against you, and the collected data will be used for
purposes of this research only.
· Data will be stored in secure storage and destroyed after 5 years.
· You have a choice to participate, not participate or stop participating in the research. You will not
be penalized for taking such an action.
· The research aims at understanding grade 9 Technology teachers perception of the design process
and its impact on their teaching style. .
· Your involvement is purely for academic purposes only, and there are no financial benefits
involved.
· If you are willing to have your lesson observed and video recorded and possibly interviewed
please indicate (by ticking as applicable) whether or not you are willing to allow the recording by
the following equipment:
willing
Not willing
Audio equipment
Photographic equipment
Video equipment
I can be contacted at:
Email: @yahoo.com
My supervisor is Dr. A. Singh-Pillay who is located at the School of Education, Science and
Technology cluster, Edgewood campus of the University of KwaZulu-Natal.
Contact details: email: @ukzn.ac.za Phone number: 031-26053672
89
My Co-supervisor is Mr. M.P.Moodley,
School of Education
Edgewood campus,
University of KwaZulu-Natal
(Tel) 0312603655 Email:moodleym1@ukzn.ac.za
You may also contact the Research Office through:
P. Mohun
HSSREC Research Office,
Tel: 031 260 4557 E-mail: @ukzn.ac.za
Thank you for your contribution to this research.
DECLARATION OF INFORMED CONSENT
I... (full names of participant)
hereby confirm that I understand the contents of this document and the nature of the research project,
and I consent to participating in the research project.
90
Appendix 2: Survey Questionnaire
A. Please complete the information needed below:
Age
Gender
Number of years teaching in general
Number of years teaching technology education
Qualification/s
Qualification in technology education (Please specify)
Have you attended any training in technology education? Please
elaborate about the training and its duration
Have you attend any conferences seminars in technology education-
Please specify
How many periods of technology education do you teach per week?
How many periods of technology education makes up your workload?
Do you teach other learning areas? - Please list them
Please indicate the number of period's these other learning areas
contribute to your workload.
Level on which you are employed e.g. L1, L2
Level:
Nature of appointment: Permanent/ temporary
Section B.
1. Please use your own words to describe what the design process means to you.
_____________________________________________________________________________
_____________________________________________________________________________
__
2. What influences your understanding of the design process? Please elaborate
_____________________________________________________________________________
_____________________________________________________________________________
__
91
3. Is the design process important in teaching technology? Kindly explain
_____________________________________________________________________________
_____________________________________________________________________________
__
4. Do you do any planning before teaching the design process? Please elaborate.
_____________________________________________________________________________
_____________________________________________________________________________
__
5. Do you emphasize any particular aspect during your teaching of the design process? Please
explain.
_____________________________________________________________________________
_____________________________________________________________________________
__
6. Does your understanding of the design process influence/impact the way you teach the design
process? Please explain how?
92
Appendix 3: Semi-structured interview
Interview Questions
1. What is your view of the design process?
2. Why do you have this view of the design process?
3. What methods do you use to teach the design process?
4. How do you present the idea of the design process to your learners?
5. Is this the only method you use to teach the design process?
6. Why do you use the method/s you mentioned?
7. What type/ kinds of activities do you give to learners during your design lesson?
8. Do you allow learners to create their own solutions when designing? If so how do you do
this? If not, why is this the case?
93
Appendix 7: Observation schedule
Theme
Guiding questions
comment
Structural
How is the lesson introduced?
What is the pace of the lesson?
What were the specific aims for learners to
learn in this lesson?
What motivation was given for learners to
learn /follow the intended outcomes?
How is the lesson concluded?
What type/kind of activity did learners
engage in?
Methods
What approaches are used to organize and
stimulate learner learning or cater for learner
misconceptions?
Teaching procedure and reasons for using
these procedures to engage with teaching of
design
What teaching and learning resources are
used in the lesson?
How do learners respond to the methods?
Were Difficulties /limitations connected with
teaching this idea noted/justified/explained
Was there a link between knowledge about
learners thinking that influences the
teaching of the design process
What other factors influenced the teaching of
this idea/design process?
Overall
impression
What is the atmosphere in the lesson like?
How did the teacher relate to the learners?
How are learners with special needs catered
for?
94
Appendix 4: Table of Analysis for Questionnaire
.
Has no knowledge
Identifying a problem
Steps that we follow.
Solving problem in technology.
solve problems.
May involve designing and making something
guideline that assist the learners in the project.
Assist them to solve problems.
Learners to follow the design process at all times
Forms the backbone of technology.
It Is not a linear process, but is usually a cyclical process
driven by evaluation
Drawing and sketching of an image of what the product will look
like.
Sketch may also show different confrontations - top view, side
Identifying problems.
Solving Problems.
Decision making through critical and creative thinking.
Involves Investigating, Making, Designing, Evaluating and
Communicating with others
T8
A logical way of putting one's ideas
Steps you will follow.
A solution to a problem.
a set of procedures that are required to be followed.
The solution of problems.
Depends on the expected outcome.
1. Meaning of Design
T1
T2
T3
T4
T5
T6
T7
T9
T10
95
Has no knowledge
T2
Identifying and solving problems through the technological process
most objects that people use everyday has been designed and made by somebody
since I started teaching tehnology is not easy for the learners to finish the project
given to them
for every scenario in technology there must be a problem to be solved
since I started teaching tehnology
T5
The design process forms the backbone of the subject and is used to structure the
delivery of the learning aims
T6
Prior knowledge from the concept of design
T7
The way I was taught in schools and in University to understand Technology as a
subject (PAST EXPERIENCE)
T8
As an educator who has worked in industry.
T9
It allows them (learners) to use different skills like investigations, making etc
T10
For every challenge there is a technological solution. Technology and its
advancement have helped us improve.
T4
T3
T1
2. what influences your understanding of DP?
96
T1
Has no knowledge
T2
it is the instrument that we use when designing and making a project
T3
The design process incorporates this designing and planning as well as
making the object
T4
It helps learners to do their project step by step and understand what is
needed
T5
Learners are exposed to a problem, need or opportunity at the starting
point. They are then engaged in a systematic process of developing
solutions that solve the problem, rectify the design issues and satisfy any
needs
Gives learners focus or direction towards the end product
it will help plan putting the project together
T7
Technology is about skills, knowledge and values. Its about designing and
solving human problems and make life more easier to live
T8
Learners need to apply all these steps as it gives them all the expanded
possibilities.
Graphic communication solves half the problem
T9
sometimes the requirements are of a far higher level and learners then
refuse to do the extra work and wait for the educator to give them
answer
T10
The technology is always evolving and moving ahead of its predecessors.
Curriculum needs updating and comparisons made from the past for the
present and for the future
3. Why is the DP important in Technology Education?
T6
97
Teacher (T)
Explanation
T1
No Explanation
T2
No Explanation
T3
You need to have resources available so that learners can
engage in the design process.
T4
learners to know each and every step of the design process
for them to understand the given case study
T5
No explanation given
T6
I will firstly explain what the PAT is about - then ask learners
to sketch/draw what the PAT will look like.
T7
Resources to use in class while teaching the design process
T8
I think of a product and make up a scenario.
We look at the logical steps to follow and how each step fits
into place when designing to solve that problem.
T9
to have an idea of what you think the learners response will
be so that you can guide them in the right direction
T10
To plan the lesson presentation in advance
The traditional 5-step sequence is taught
4. Elaborating teachers' planning before DP?
98
Teacher (T)
Explanation
T1
Has no knowledge
T2
Every step has to be properly explained to
learners
follow steps
T3
Learners need to know that every object that
has been created has gone through the design
process -
Creativity
T4
there must be a problem to be solved
problem solving
T5
learners are given a scenario and they will
identify needs or problems and find a solution
problem solving
T6
they must be creative and yet achieve its
purpose
Originalty/
Creativity
T7
I encourage learners to work effectively with
others
Group work
T8
Research/Investigation; Safety, Graphical
representation - Clear and informative at every
step.
follow stept
We look at the logical steps to follow and how
each step fits into place when designing to solve
that problem.
follow stept
T9
Try not to copy ideas. Create your own
Originality/
Creativity
Have fun
Group work
successful solving of a problem
problem solving
Originality and creativity used to do this is most
welcome
Originality/Cr
eativity
Creativity
Originality/
Creativity
Aspects teachers emphasise in DP
(All teachers have aspects of emphasis in the design process)
T10
99
6. Does your understanding of DP influences how
you teach DP?
T1
Has no knowledge
T2
YES. learners are able to implement the steps when solving problems
Step-by-step
T3
YES. The design process should allow the learner complete freedom of
thought and expression
Learner
Autonomy
T4
YES. If its explained wrongly (Design process) learners will not understand
what is needed from them
T5
YES. Learners are provided with opportunities to explore values and
attitudes and develops informed decisions that will help them to make
compromises and value judgements.
Learner
Autonomy
Learners are engaged in a systematic process to develop solutions that solve
the problems
Step-by-step
T6
YES. I will implement guidelines if there are any
they would be more guided as to what to do.
Step-by-step
T7
YES. The way I teach is about how I understand the DP
Teacher comfort
T8
YES. By using and emphasising all the steps, the learners get to know/realise
that there are no shortcuts to designing a good solution to a problem
Step-by-step
T9
YES. If you are familiar with the process then
it makes teaching easy
because
you will already know what is expected and you can explain to the students
exactly what is expected
Teacher comfort
T10
YES. The sequential manner in which this design process is implemented
brings some kind of standardisation for this aspect. Sometimes the
environments may differ but the methods of solving problems will entail a
certain set of activities in a particular sequence
Step-by-step
Appendix 5: Table of analysis for semi-structured interview
100
100
T2
1. What is your view
of the design process?
I think it is a very good instrument in the sense that it talks to the
learners as to which steps they need to follow if they have to solve a
particular problem in technology: Steps!! The steps that need to be
followed when you have to solve a problem
2. Why do you have
this view of the
design process?
I think is very very important to them to know the steps because is
gonna help them when it comes to solving problems in technology
because technology as a subject or as a learning area is all about
problem solving.
3. What methods do
you use to teach the
design process?
Most of the time I just... eh I look around and I pick whatever system
or whatever things is there and to tell them `why do you have this,
what was the motive behind' like with the case of cell phone "why do
we have cell phones?" And then they will tell us that the reason why
we have cell phones is purely for communication purposes INT: Oh!
So more or less is like it involves some discussions and things! RS:
YEBO! Then it means someone out there identified the problem,
then, the steps follow
4. How do you
present the idea of the
design process to
your learners?
well I think is boiling back to the last question that I answered. It's a
question of coming up with a scenario. Then ask them some few
questions then you are able to introduce the.this design process to
them.
5. Is this the only
method you use to
teach
the
design
process?
Most ly it is the only method because if find it much more familiar. Its
working for me and the students are enjoying it.
6. Why do you use the
method/s
you
mentioned?
Ehehehe! Ehh! For the years that I have taught I find it much more
useful as my useful tool and is helping a lot and I do have results to
show its helping.
7. What type/ kinds of
activities do you give
to learners during
your design lesson?
Well, after one has explained everything as far as the design process
cycle is concerned, the steps are there starting from 1. Identifying the
problem, investigate to design. Uhm! Then at times I take any
particular system; can be a cell phone again, then ask them to follow
the very same steps as to how one came about the introduction of
cell phones
8. Do you allow
learner to create their
own solutions when
designing? If so how
do you do this? If not,
why is this the case?
Yes!, Actually, as I introduce my lesson on the design process cycle I
just tell them that why do you have this thing is because someone
out there identified the problem. So them, they can also identify the
problem and come up with their own solution and it is up to us to
check the one solution whether it is really meeting the requirement
for trying to solve the problem. INT: Ok! That means you allow some
degree of independence and freedom as they generate their own
solutions RS: Yes!, Yes!
101
101
T4
1. What is your view
of
the
design
process?
is to identify and defining the problem, also solving the problem by
having various possible solutions. The problem must be clearly
identified and statement of the problem should be short and
complete. It must give all the information that are available about
the problem.
2. Why do you have
this view of the
design process?
Ok. All I can say is that I have the view about the design process in
this manner because it was presented to me this way in the manner
that I can understand easily.
3. What methods do
you use to teach the
design process?
Ok., basically the method that I use eh I can say is the guideline which
have to do with identifying the problem; that's number 1. And it
must have possible solutions and designing as well as to evaluate
4. How do you
present the idea of
the design process to
your learners?
Ok, I present the design process to my learners by explaining the
design process. Then the learners must identify the problem. I do this
through drawing, taking into consideration the 2 dimensional and 3
dimensional as well as to sketch some freehand drawing.
5. Is this the only
method you use to
teach
the
design
process?
this is the method. I don't have another method
6. Why do you use
the method/s you
mentioned?
I think it is suitable for learners; that's number 1. And by using it you
can see that they understand it better and they show interest in
drawing different designs.
T5
1. What is your view
of
the
design
process?
OK. The design process is an interactive approach used to develop
solutions to an identified problem or human need. Now the
associated skills are investigating, designing, uh thats the
development of initial stage or ideas, making evaluating and
communicating. Now the design process is used by engineers,
architects, industrial designers and many others when developing
original ideas to meet needs or wants and in order t solve a problem.
2. Why do you have
this view of the
design process?
The design process forms the backbone of the subject, and it is used
to structure the delivery of the learning aims. No product has ever
been manufactured that did not undergo development through
design. All tend to use the design process as they develop solutions
to problems needs or wants.
3. What methods do
you use to teach the
design process?
Ok. The learners are generally exposed to a problem, a need or
opportunity as the start point. They are then engaged in a systematic
process to develop solutions that solve the problem, rectify the
design. issues and satisfy any need. Now the design process in not a
linear process but a cyclical one. The different skills can be applied in
any order.
4. How do you
present the idea of
the design process to
your learners?
Ok! Learners are generally exposed to a problem, need or
opportunity as a starting point. They are then engaged in a
systematic process to develop solutions that will solve the problem,
rectify the design issue and obviously satisfy a need.
5. Is this the only
method you use to
No! The recommended approach will be to introduce the required
knowledge followed by practical work in which the knowledge is
applied
102
102
teach
the
design
process?
6. Why do you use
the method/s you
mentioned?
Ok. In all cases the teaching will be structured using the design
process as the backbone for the methodology. Now some of these
elements will be eh.. assessed formally each term. As learning pro..
progresses learners must be made aware of the interrelationship
between technology society and the environment. Wherever
applicable, learners should be made aware of different co-existing
knowledge systems.
T8
1. What is your view
of
the
design
process?
Well, as a technologist, in order to perform and perfect your work,
you do need to go through the design process in every step. Well we
will consider the six steps as being important. And in order to perfect
that, you need to go and do your research on all these things first so
that you can do better designs, you have a bigger scope of
possibilities and you can get information and then sit down and
brainstorm the information and then and eh.. work and then you can
design something that is worthwhile it. Now in case of children, is
very important to learn to use the design process because it gets
their mind working so that they can work step-by-step and develop
their minds in the different sections and build something that they
could be proud of and see their short comings and remedy them.
2. Why do you have
this view of the
design process?
Ok, I am a qualified diesel fitter; a fuel pump technician and training
officer and through the years we've learnt that in order to perfect
something you've got to be logical in the way you think. And in order
to do that you have to follow the steps of previous people and build
on it. And technology is all about building on previous experiences
and trying to perfect previous imperfections.
3. What methods do
you use to teach the
design process?
alright. I normally go back to eh... indigenous knowledge..which I
think technology is based on. And if you look at indigenous
knowledge, although it is still in existence today, it is the foundation
of technology and I take my learners back to that stage and tell them
to work from very basics and look at what was done and eh.. build on
that and look at everything else and at least you will be able to work
and produce work that you are expected to produce.
4. How do you
present the idea of
the design process to
your learners?
Alright! First, we normally produce a scenario. Ok! We give them a
we give them a scenario because that is you tell them a story and you
build in your work into it, we catch their attention. From there we tell
them that now the problem is within the scenario, you now need to
design your design brief from there... : ...and see what your problem
is and what is your expectation to overcome the problem.
5. Is this the only
method you use to
teach
the
design
process?
No! not really. It depends on situation you are in. : Eh.. because every
situation is different but if you are working with learners especially in
technology you have to include that to start off with.
6. Why do you use
the method/s you
mentioned?
: Eh.. because every situation is different but if you are working with
learners especially in technology you have to include that to start off
with.
103
103
T10
1. What is your view
of
the
design
process?
In terms of it being in our syllabus, there is a need for it because we
have children nowadays that are not uhm! really cultured in the way
of thinking in terms of uhm! being creative, you know? Uhm! back in
the days when we were in school, we were we were.. it was instilled
on us to think creatively. We had various programmes; visual arts and
so on which uhm assisted us in our creative judgment. nowadays
with the increase of technology, the child's mind is getting more
relaxed in working terms of working in a creative way. Uhm the thing
is as I mentioned early it was.. it is necessary. Uhm it is a good thing
because in terms of technology the design process is important for us
to use in terms of solving problems. Most of what is around us now
has been the result of the design process.
2. Why do you have
this view of the
design process?
Our world is very dynamic and many new things are coming up on a
daily basis. Ehh the history of design has evolved to such an extent
that now we're finding that our people are now going to go out to
live in an outer space. You know? So from where it is coming to
where it is going, the design process is always going to be there to
meet that technological need.
3. What methods do
you use to teach the
design process?
Uhm! There is no set method; we have to follow the procedures uhh!
The five elements within the design process. But we have to
ascertain the level at which the child is thinking first... ....in order to
ehm... start the process. Sometimes the child does not understand
what is meant by design. We have to teach that aspect then go to
through the processes. : and sometimes they intermix processes;
they do not keep it in a structured manner where we have ideas first
and we refine ideas to final design more or less.
4. How do you
present the idea of
the design process to
your learners?
Uh! I coach it in such a way in terms of making a problem, and, uh..
the children must use their skills and knowledge in order to
circumvent the problem. They must come about a certain solution
and no one can get the solution straight on but the ideas that they
put forward will lead to a possible solution.
5. Is this the only
method you use to
teach
the
design
process?
Sometimes you have to use other methods. Uhm.. it depends on the
responsiveness of the children. Sometimes a certain method may not
really unlock the potential and another way will do that. Maybe if
you're just discussing it, some children may understand. Another way
is to really communicate in terms of ehh! visual ideas.. because if you
put a visual idea before a child certainly they understand where they
are at that point in time and where they are going to move forward.
6. Why do you use
the method/s you
mentioned?
Uhm! There's no particular reason but you know as an educator we
need to try to instill in the child that they need to uh use this
method. Because when you teaching the design process, it is not only
for when they are here in school... ...it is to help them in their lives as
well because they are gonna come up with certain technological
problems which they need to eh.. solve themselves. I mean it could
be anything; big or small.
104
5a.
Teacher
1.
What is your view of the design process?
Categories
T2
I think it is a very good instrument in the sense that it talks to the
learners as to which
steps
they need to follow if they have
to solve a
particular problem
in technology:
Steps!! The steps that need to be
followed
when you have
to solve a problem
Step-by step
process
problem
solving
T4
is to
identify and defining the problem, also solving the problem
by
having various possible solutions. The problem must be clearly
identified and statement of the problem should be short and
complete. It must give all the information that are available about the
problem.
Problem
identification,
problem solving
T5
OK. The design process is an interactive approach used to develop
solutions to an identified problem or human need
. Now the
associated skills are
investigating, designing, uh thats the
development of initial stage or ideas, making evaluating and
communicating
. Now the design process is used by engineers,
architects, industrial designers and many others when developing
original ideas to meet needs or wants and in order to
solve a problem.
problem solving.
Problem
identification
T8
Well, as a technologist, in order to perform and perfect your work,
you do need to go through the design process
in every step
. Well we
will consider
the six steps as being important
. And in order to perfect
that, you need to go and do your research on all these things first so
that you can do better designs, you have a bigger scope of
possibilities and you can get information and then sit down and
brainstorm the information and then and eh.. work and then you can
design something that is worthwhile it. Now in case of children, is
very important to learn to use the design process because it gets
their mind working so that they can work
step-by-step
and develop
their minds in the different sections and
build something that they
could be proud of
and
see their short comings and remedy them.
Step-by step
process.
9b.
Teacher
2.
Why do you have this view of the design
process?
T2
I think is very very important to them to know the steps because
is gonna help them
when it comes to solving problems
in
technology
because technology as a subject or as a learning area
is all about problem solving.
Learner
comfort
in
problem
solving
T4
Ok. All I can say is that I have the view about the design process
in this manner because it was
presented to me this way in the
manner that
I can understand easily.
Past
experience.
Teacher
comfort
105
T5
The design process
forms the backbone of the subject
, and it is
used to structure the delivery of the learning aims.
No product
has ever been manufactured that did not undergo
development through design
. All tend to use the design process
as they develop
solutions to problems needs or want
s.
I love
teaching technology, it's so alive and interesting, you know,
I am a qualified Geography teacher but I have been teaching
technology for the past 9 years, I attended the training
workshops conducted by the subject advisor, but it wasn't
enough so I started reading to learn as much as I can, and
I'm still learning, I try and get many textbooks and study
them to help me, I treat the policy like the bible it guides
me in my teaching and assessment.
Underpins
technology
education.
Past experience
problem
solving.
T8
Ok, I am a qualified diesel fitter; a fuel pump technician and
training officer and
through the years
we've learnt that in order
to perfect something you've got to be logical in the way you
think. And in order to do that you have to
follow the steps of
previous people and build on it
. And technology is all about
building on previous experiences and trying to perfect previous
imperfections.
past
experience.
5c.
3.
What methods do you use to teach the
design process?
T2
Most of the time I just... eh I look around and I pick whatever
system or whatever things is there and to tell them `why do
you have this, what was the motive behind' like with the case
of cell phone "why do we have cell phones?" And then they
will tell us that the reason why we have cell phones is purely
for communication purposes
INT: Oh! So more or less is like it involves some discussions
and things!
RS: YEBO!
Then it means
someone out there identified the problem,
then, the steps follow
Scenarios,
Discussions
(Problem solving),
step-by-step
process,
Problem
identification
T4
Ok., basically the method that I use eh I can say is the
guideline which have to do with
identifying the problem
;
that's number 1. And it must have possible solutions and
designing as well as to evaluate
Problem
identification
Step-
by-step process.
Problem solving
T5
Ok. The
learners are generally exposed to a problem,
a need
or opportunity as the start point. They are then engaged
in a
systematic process
to develop solutions
that solve the
problem, rectify the design. issues and satisfy any need. Now
the design process in not a linear process but a cyclical one.
The different skills can be applied in any order.
Problem
identification
scenario,
Problem
solving,
non-linear
approach
106
T8
alright. I normally go back to eh... indigenous
knowledge..which I think technology is based on. And if you
look at indigenous knowledge, although it is still in existence
today, it is the foundation of technology and I take my
learners back to that stage and tell them to work from very
basics and look at what was done and eh.. build on that and
look at everything else and at least you will be able to work
and produce work that you are expected to produce.
Problem
identification.
Problem solving
with indigenous
knowledge
5d.
4.
How do you present the idea of the design process to your learners?
T2
well I think is boiling back to the last question that I answered. It's a question of
coming up with a scenario
. Then ask them some few questions then you are able to
introduce the..this design process to them.
Scenario (problem
identification),
questioning,
T4
Ok, I present the design process to my learner
s
by explaining the design process
. Then
the learners must identify the problem .
I do this through drawing, taking into
consideration the 2 dimensional and 3 dimensional as well as to sketch some
freehand drawing.
By explaining the DP.
(Scenario) Problem
identification
T5
Ok!
Learners are generally exposed to a problem, need or opportunity as a starting
point
. They are then engaged in a systematic process to
develop solutions that will
solve the problem
, rectify the design issue and obviously satisfy a need.
Problem identification
,
problem solving,
T8
Alright!
First, we normally produce a scenario
. Ok! We give them a we give them a
scenario because that is
you tell them a story and you build in your work into it,
we
catch their attention. From there
we tell them that now the problem is within the
scenario
, you now need to design your design brief from there... : ...and see what
your problem is and what is your expectation to overcome the problem.
Scenario (Problem
identification),
Problem
solving
107
5e.
5f.
7.
What type/ kinds of activities do you give to learners during
your design lesson?
Theme
T2
Well, after one has explained everything as far as the design process
cycle is concerned,
the steps are there starting from 1. Identifying the
problem, investigate to design.
Uhm! Then at times I take any
particular system; can be a cell phone again, then ask them
to follow
the very same steps
as to how one came about the introduction of cell
phones.
To follow the steps
to design
T4
I give them a case study that present the problem to be solved.
Basically they need to follow,
I tell them to follow the six
technological processes steps.
Yea, so that eh.. they have to identify
the problem, after that they come up with eh.. possible solutions for
the problem and they design the solution. After that, they present it in
class. INT: wonderful! So you follow the steps.
RS: I just follow the steps.
follow the six
technological
processes steps.
T5
Ok! Learners are firstly given the problem.
I teach them
methodologies that will lead up to solving the problem
. : They are
shown PowerPoint presentation, they are given models, worksheets
etc.. The skills and concepts give them an understanding of the
problem.
They then apply this knowledge to the design process
. The
practical skill activities help them to create the solution.
Problem solving
6.
Why do you use the method/s you mentioned?
Category
T2
Ehehehe! Ehh! For the
years that I have taught I find it much
more useful
as my useful tool and is helping a lot and I do
have results to show its helping.
Past experience,
Teacher comfort,
usefulness ,
Successful
outcome.
T4
I think
it is suitable for learners
; that's number 1. And by
using it you can see that
they understand it better and they
show interest
in drawing different designs.
Suitability for learners,
learner comfort,
results
T5
Ok. In all cases the teaching will be structured using the
design process as the backbone for the methodology. Now
some of these elements will be eh.. assessed formally each
term. As learning pro.. progresses learners
must be made
aware of the interrelationship between technology society
and the environment.
Wherever applicable, learners should
be made aware of different co-existing knowledge systems.
To extend learners'
knowledge
(Exposing
learners to different co-
existing knowledge
systems)
T8
: Eh.. because every
situation is different
but if you are
working with learners especially in technology you have to
include that to start off with.
Situations may differ.
108
T8
Alright. First in the design
we will give them books to read through.
Relevant books on the topics that you've got then
we will give them
possible workings to draw to brainstorm their ideas in groups to see
what they can come up with.
And once they come up with some idea
then you've got.. eh say you've got a book there then that gives them
an idea to work away from that and try and try and work with what
they are expected to do.
Constructivism
5g.
8.
Do you allow learner to create their own solutions when designing? If so how do you do this? If not, why is
this the case?
Category
T2
Yes!
, Actually, as I introduce my lesson on the design process cycle I just tell them that why do you have this
thing is because someone out there identified the problem.
So them, they can also identify the problem
and come up with their own solution
and it is up to us to check the one solution whether it is really meeting
the requirement for trying to solve the problem. INT: Ok! That means you allow some
degree of independence and freedom as they generate their own solutions
RS: Yes!, Yes!
Constructivism (Autonomy)
in problem identification
and solving
T4
Yea, Yea!
: I do it because of the case study given to them.
They must identify the problem
, that's the main
aim. And
therefore it is possible for them to come up with the best possible solution.
: I give them
first,
individual learner
to come out with the a solution to the problem they are given. A
fter that they can work
as a group
and ehm.. try to come out or to choose the best solution towards the problem.
Group work
(social
constructivism)
in problem
identification and solving
T5
Yes!
As learners progress through a task, they are... as they progress through a task, they use the associated
knowledge and skills that I taught them and then they modify the ideas to create a solution. They just don't
memorize what I taught them.
They become innovative in developing solution to solve a problem
.
They are
encouraged to explore their own ideals, attitudes
and also to develop uhm informed opinions that they can
help them to make compromises and value judgment
Problem solving through
innovation, Application of
learned skills,
Constructivism (Autonomy)
T8
Uh! Yes
! But we give them the opportunity to do all that but in terms of if
they are doing projects on their
own
, then they are welcome to do that. But remember,
today, in terms of material usage sometimes is not
possible. So, we give them that opportunity and then we standardize a project.
Right.
We give them an
opportunity to build their own projects.
Right? They come.. some of them come up with really good
example and you work through step by step what is expected of them and
show them how its gonna be
done
and then you build...and then they give you sketches of their project and then you show them how to
do a scale drawing of the project and then start working on materialcollection and then start building step
by step all the processes...
Within their own freedom and within their own time.
Demonstration,
Constructivism
(Autonomy)
109
Appendix 6: Transcript of post observation interview
Post observation interview: (T5) (10
th
September, 2014)
INT: Ok! Mam, thank you very much for giving me the opportunity once again to record this lesson and
to observe it as well. Ehm I have so few questions that I want to ask In relation to the lesson that
was presented. Can I please go on and ask.
RS: (Nods) yes
INT: Mam, what was the reason for using the teaching procedure that you used during the design lesson?
RS: Ok! Uh! as you observed, I used the power point presentation because I feel that sometimes as a
teacher who is standing in front of the class and basically talking about certain concepts or skills, the
child doesn't really know what you are talking about. But having like visual aids, the child know exactly
what you talking and you find that tends to be more effective, its more stimulating and children's
response as you can see was more effective.
INT: Ok! Thank you. Ehm! What did you intend the learners to learn from the activity that you gave
them.
RS: I basically wanted the learners to learn everything about gears and eeeh... looking at gears...how to
calculate mechanical eeh.. mechanical... sorry I made a mistake.
INT: Gear, no its fine.
RS: I wanted them to basically calculate gear ratio. And eeeh...yea that's it. To basically calculate gear
ratio to look at eeh.. the input, the output which is the input gear, which is the output gear in terms of
speed, rotation.
INT: Ok! So why is it important for learners to know about this?
110
RS: because if you look at gears, gears is used in almost every mechanism in reality. And now that we are
living in modern technology, you will find gears everywhere and then peoples know exactly what we
talking about, and coming to school they are in a car; eeh..we have gears.
INT: Yea!
RS: They know what is speed and what is going slow and eeh.. obviously when it comes to the building
of mechanisms as well, they know how to eeh..basically engage in or employ this in eeh..future
inventions and so forth.
INT: Ok! Number four what else do you know about the design process that you do not intend learners to
know yet?
RS: (Silent)
INT: Because you know that there are so many aspects of the design process. in fact they cannot take
place...all of them cannot take place in one lesson. So by all means there are so many aspects of it that
you possibly could not have taught within this short time. So...
RS: Well obviously eeh... time is a constraint so what else do I know about the design process that I did
not intend the learners to... eeh.. obviously uhm..!
INT: Looking at their level.
RS: Obviously eeh.. looking at their level, obviously uhm.. later they are going use gear systems when
they are working with their Mini PAT. And eeh... whatever mechanism or structure they have to build,
they are going to employ the use of gears in it. So, obviously that will be the types of gears. I haven't
taught them that as yet..
INT: Ok!
RS: That's a follow up activity, and then they're going to definitely use one of these type of gears
to...eeh build a mechanism for the next Mini PAT.
111
INT: Ok! Thank you. What knowledge about learners' thinking influences your teaching of the design
process?.. because, the.. eeh... as a teacher, teachers usually know how the learners... the direction in
which they are thinking. And that also informs them about their teaching strategies and all those things.
So in this case, how do you know the learners in terms of how they are thinking?
RS: Well, each child eeh.. each child thinks differently. Each child is unique in their own way. Eeh.. there
are different levels eeh.. in questioning techniques; there are different levels in which they will answer a
question. And eeh.. I find that sometimes the lesson that I did using a powerpoint presentation, even a
weaker learner will automatically be able to pick up some things and eeh... They are able to give their
view point; they express themselves. The lesson becomes quite child friendly , and I find that even the
slow.. the so called slow shy child, you bring out this effectiveness in them where they want to be part of
this lesson as well and participate.
INT: Ok! Thank you so much. Number six;
What other factor/s influence the way you teach the
design process? because you see, like...myself for instance in my school, I don't have all these
resources. So, definitely the way I present it will be very different from the way it will be here.
But then... yea! Something like that.
RS: uhm..! obviously not all schools have access to resources and stuff like that. So how would you go
about teaching a lesson like so in a school without a PowerPoint presentation; a school that has no access
to electricity. Uhm! Well basically you will use eeh.. child friendly worksheets. Eeh... the teacher may
create posters... eeh... simple things as getting children to bring bottle caps, eeh... finding resources,
renewable resources and stuff at home that they can engage in a class activity where they are building
simple gear trains using bottle caps and the concept and the idea of these skills are definitely coming.
Simple things like a coke can..
INT: Mhm!
RS: You know smashing it and making a gear system, eeh.. taking simple corrugated cardboard from
boxes that they can use eeh... for a gear system... uhm! So am sure methods like this can be employed
basically in any school situation.
112
INT: So, besides the available resources that you have here you are saying you can also consider other
readily available materials that are out there. From the environment.
RS: Yes! Yes. From shopping centres, from the environment itself.
INT: Ok!
RS: They can eeh... use this to create... even the teacher himself or herself can eeh... can basically pre
prepare by cutting out cardboard and making models of a gear system that he or she can use to engage in
a lesson that the child knows what to do.
INT: Ok!
RS: And also you can do stimulating activities with learners where they are eeh... in a class activity
they're building eeh... gear systems out of things that they will find in the neighbourhood themselves.
Even if they are going to their house they must find something; bottle caps, eeh... stuff like that that they
can basically use in ...
INT: Thank you so much. The next one is what do you do to ascertain ascertain learners understanding or
confusion around the design process? how do you find out whether they understand it or they are
confused?
RS: Eeh.. as a teacher hmhm!!! (clears her throat) when am teaching, obviously you looking at all
children as you are teaching. And the moment I find that a child is confused, I will not go further in the
lesson. I normally stop and I make sure I drill simple pneumonics. I like drilling simple pneumonics like
for example when you observed my lesson, as simple things in an exam situation you ask a child to
calculate gear ratio, they are confused: is it the number of cogs in the driver divided by the driven or vise
versa? So simple things as using pneumonics like `n' comes before `r' alphabetically.
INT: That is what you do when you discover that they are sort of confused. But then how do you know
that they are confused before you remedy the confusion?
113
RS: eeh.. body language. When when you as a teacher when you are teaching, you can see body
language. You know when a child doesn't know. For example if you ask a child `Do you understand?'
and you just say right Jack did you understand?' and there's this confusion but they will say `yes Mam'
you understand? And you know as a teacher its your intuition that tells you that a child doesn't
understand and I think I as a teacher read body language very well. And I can see when a child is
confused. I can see when a child eeh... echoes the other pupils sentiment in the sense that... In order to
keep up with him and to show that `hey am not a slow learner, I know what is happening' and will yes I
understand, I know it. And as a teacher you can sense that and therefore I will stop the lesson and I will
drill. So you may ask me the next question `so what happens to the high-flyers you know they work.
Aren't they gonna be bored? So sometimes you can even call those high fliers in front of the class to
explain to the weaker learners.
INT: Ok!
RS: So everybody is engaged and they are not bored.
INT: And then now you can that they actually understand.
RS: Yea, so the higher fliers also feel they are not left out.
INT: Ok! Thanks Mam. Ehm! How do you assess learners' work when it comes to the design process?
actually I saw that there was some sort of assessment that was taking place. Yea but I want you to say it
just for the sake of the record.
RS: OK! Ehm... there are so many ways in which you can assess a learner's work. Number 1 is class
activities eeh...when you give the class activities, obviously we are... After the child finishes the class
activities, we recappin and remarking the activities. Then they have follow up activities like Mini PATS
where we teachers assess them. They are given marks according to a rubric. And the reason why I use a
rubric system is because eeh... a child is never disadvantaged. Eeh... somehow or the other... every child
eventually gets to pass. Another way of assessing them is... sometime you play little games. You'll find
114
that children love things like games. You know, when you see these things like test, a child is bored and
they feel they just have to learn for the sake of...but when you play games like as I played battle of the
sexses...
INT: mmm! Yea!
RS: Eeeh..! children are competitive. You find that boys always want to compete against girls, vice versa.
And eeh... it somehow brings out. Even the shy kidsautomatically want to answer. Competition is
something that is an inborn thing in every human being.
INT: Yea!
RS: And eeh... having little fun games like quizzes, eeh... `Battle of the sexes' you know where... at the
end of the lesson you're recapping. So basically you are killing two birds with one stone. You recapping
the lesson and at the same time the lesson is so child friendly that better understanding takes place. And if
you noticed the lesson as well, you found the kids were eager to answer question.
INT: Yes!
RS: Even I have some shy kids who never even speak. You won't even hear them utter a word, came in
the front and they were trying to challenge the other half.
INT: Ok! Mrs. Gounden. Thank you so much. From Crossmoor Secondary School. Actually I also
enjoyed the lesson so much and it was very interesting.
RS: No Problem!
INT: Ehm... I would like to express my appreciation and gratitude for all the things you've done to help
me do this study. Thank you! I will get back to you.
RS: Ok!
INT: Thanks! Thank you so much!
115
Post observation interview: T8
INT: Good morning Mr. Naidoo.
RS: Good morning
INT: Eehm! Thank you very much for giving me the opportunity to observe your lesson
RS: No problem!
INT: And eeh! I would like to ask some questions in relation to the observation that took place.
RS: You most welcome.
INT: Yes sir, thank you. The first question is that what was the reason or reasons for using the teaching
procedure that you used during the design lesson?
RS: Ok! Most of our learners today are not observant. They pass objects, they pass buildings they pass
machinery without being obvious and looking at what they are looking at. And so when you start your
lesson and you ask some "what is a front view"? "what have you seen"? "did you see anything unique
about it"? they don't know.
INT: Ok!
RS: So that is why you start with this technique on looking at different views, looking at points and
planes so they can identify all this. So when it comes to using it in their own work when doing their
project you know they have a better understanding of what they are looking at. And then they can look
and see from different angles you will see different things.
INT: Ok! So, number two: What did you intend the learners to learn from the activities that you gave
them?
RS: My intention was to draw their attention to show them that when you look at something you need to
look at it a little more than just looking at it and see what you see. Because often when you look at
something, it has a different meaning to you. But when you studying something it is totally different from
116
what you would have observed initially. So you need to bring this to the attention of the learners because
their purpose is to study things a little more intensively so that they have a better understanding of what
they are looking at.
INT: Ok! So, why is it important for the learners to know about this?
RS: Ok! We send learners out, we ask learners to do research, to go and observe. So when the go out and
they do this, you give them a project, they need to do this research. You give them this knowledge first.
So that when they go out they are observant, they have a knowledge they have or they know what to go
and look for specifically and how to go looking at it.
INT: Ok! Marvelous! Ok! Question four: What else do you know about the design process that you do
not intend learners to know yet?
RS: these learners are young, they've been introduces to drawing at the beginning. So there are certain
aspects that you don't bring to them first. They need to have an holistic view of something first before
you can start showing them. Now important to children is what we will call machine drawing where you
breaking up into parts. Ok? Children don't need to know that first especially when they are introduced to
drawing. They need to see the whole picture and later as they progress, then we need to break it down and
tell them this is what this is. This is a mechanism that makes the whole machine.
INT: Ok!
RS: Get part by part so they understand. Now in most of these drawings when we look at the whole
drawing there are many things inside the drawing that needs to broaden so we use the technique of
hidden detail.
INT: Ok! Thank you so much. Question five: What knowledge about learners' thinking influences your
teaching of the design process?
117
RS: Ok! Over the period of time, we've come to know that children are less observant today (coughs) and
as a result when you speak to them about a..an object or a machine or whatever you want to, they don't
have that ability to see things that the teacher would see. So is important that you bring this to the
attention of the child so that when he goes to the scene to look at this again he looks at it at.. from a
different view, from a different viewpoint
INT: Ok! Thank you Sir. What other factors or what other factor influence the way you teach the design
process?
RS: right! Now today you must alter your teaching strategy to cater for the learner so that at the end of
the lesson the learner must be able to understand what is there. And he must be able to now go and relate
that information and use the information he is given to work his workings when he's doing his project.
INT: OK! So what do you do to ascertain learners' understanding or confusion around the design
process?
RS: Right! Continuously you do recaps on your work and you question them at different points to see that
at that point have you understood what we are looking, what we are trying to get through and what I am
trying to bring to you, so that you are more observant and when you are observant, you will be able to
pick up all the final points about objects, machines. And then when it comes to drawing you have that
knowledge to put it to practice because you've seen it. Now you understand where it is and what it is,
then you can put it down on paper.
INT: Thank you so much. The last but not the least question: How do you assess learners' work when it
comes to the design process?
RS: Ok! Now there are many ways in which you assess learners' work. Like yesterday's lesson we at the
beginning where we were teaching them drawing, we used worksheet and we went around, I went around
118
to see that at each stage whether the child understood what he was doing and assistance was given and
reassurance was given to the child to make sure that he understands.
INT: Ok!
RS: And all that. Now when you are in a practical situation you go to the child and you will see how he is
working. If he is off line then you will put him back unto the correct line, show him exactly how it would
be done.
INT: Ok sir! Ehm! I have another question which is a bit personal because part of this list. Ehm, as I was
observing, it came to be that you were teaching a multi-view drawing. Like, something like orthographic
projection.
RS: Yea!
INT: but one would have expected that when is about design process, maybe is about ehm, you know
Generation of ideas, scenarios and all those things. So is there any link between what you were teaching
and the design process, or has it got any relation?
RS: Yes there is. Definitely there is a relation. Because, when you come to draw your final drawing; your
detailed drawing, a detailed drawing is not just one piece of drawing. It makes up different aspects. When
you do detail you do details of all different parts, ok? And you look at different sides of the different
views. Then you put it together.
INT: Yea!
RS: So..
119
INT: So all those things also form part of the design
RS: (responds simultaneously) ...part of the design. That's when you are doing your specific engineer
drawing as you call it or your detail drawing where you'll have parts and say somebody else, you have
the drawing and somebody else is building that project. Say a school has a project to do something and to
pass unto another person to manufacture. The other person will not be able to manufacture a product if he
doesn't have the explanatory drawing, different views of each individual thing and clearly detailed. Then
only will (will he) be able to build it.
RS: Ok?
INT: Thank you sir. Thank you so much for your time.
RS: No. not a problem! I'll always be of assistance to you. I appreciate this
INT: Thank you
120
Appendix 7: Table of analysis of
p
ost observation interview
Post Observatio
n Intervie
w Analysis
In
tervie
w Qu
es
tion
T
5
Category
T8
C
ategory
1
W
hat was
th
e
reason/s for
usin
g
the teaching
procedure y
ou u
sed
during th
e d
esign
Ok! Uh! as y
ou
observed, I use
d
the power
poin
t presentation
becaus
e I f
ee
l th
at s
om
etim
es
a
s
a t
ea
cher
who is
s
tanding
in
front of the class and b
asicall
y
talking abou
t certain concepts
or skills, th
e ch
ild doesn't r
ea
lly
know what y
ou
are talk
ing
about. But havin
g lik
e visual aids
, th
e c
hild
know exactly
what y
ou talking
and y
ou
find
th
at tends to
be mor
e eff
ective,
its more
stimula
ting
and childr
en's response as you can see
was
mor
e ef
fec
ti
ve.
It is more
effective:
Le
arne
rs
demonstrate
unde
rstanding
Ok! Most of our learn
ers tod
ay
ar
e not observan
t. They
pass objects, they
pass build
ings they
p
ass machiner
y
without b
eing ob
vious and l
ookin
g at what they
ar
e
looking at. And so when y
ou
star
t y
our lesson and
y
ou
as
k s
om
e "
what
is
a fron
t v
iew"
? "
w
hat hav
e
you
s
een"
?
"did y
ou
see an
ything uniq
ue abo
ut it"?
th
ey
don't know.
So that is wh
y you start with
this
technique on lo
oking at
differen
t views, looking at poi
nt
s and planes so th
ey
can
identif
y
al
l this.
S
o
when it
come
s to using it
in t
heir
own work when doing their
project you know
they have
a better
unde
rstanding
of what they are
looking
at
. A
nd
then they
can
lo
ok and see f
rom differen
t angles y
ou
will
see diff
eren
t th
in
gs
.
It is more
effective:
Le
arne
rs
demonstrate
unde
rstanding
2
What did
y
ou
intend
the learn
ers
to l
earn
from
the
act
ivit
y
given/und
ertak
en
?
I basically
wanted t
he learners
to learn
everything
about
gears
and eeeh
... looking
at
ge
ars...how to cal
cu
lat
e
m
echanic
al
eeh
.. m
echani
ca
l... s
orr
y I m
ade
a
m
is
take.
I
wanted them to
basically
ca
lcul
ate g
ear ratio
. A
nd
eeeh...
ye
a
tha
t's
it
. T
o bas
ica
lly
cal
cula
te
gea
r ra
tio to
look
at eeh
.. the inpu
t, t
he
ou
tput which is th
e input g
ear, which i
s
the ou
tput g
ear
in term
s of speed
, rotation
.
Ever
yt
hi
ng
about g
ears:
basically
cal
cula
te
gea
r
ratio
.
M
y in
ten
tion wa
s to draw
the
ir
at
tention
to
show them
that when you
look at someth
in
g you need
to
lo
ok at
it a
litt
le more
than just looking at
it
and see what yo
u see
.
Because
oft
en w
hen y
ou look at
som
ething, i
t h
as a
differen
t mean
in
g to y
ou
. Bu
t wh
en y
ou stud
yi
ng
som
ething it
is t
otall
y
diff
eren
t f
rom what y
ou w
ould
have observ
ed
in
itia
lly.
So
you
n
eed
to br
ing th
is
to th
e
att
ention
of
the
learners
bec
aus
e
their purpose is
to study
things a lit
tle m
ore intensiv
el
y s
o th
at
th
ey
h
ave
a bet
ter
understanding o
f what they are looking at.
To observe
objec
ts close
ly
.
To stud
y
objects in d
etail
3
W
hy
is
it
important for
learn
ers to
know
about this
?
becaus
e if
you
lo
ok at
ge
ars
,
ge
ar
s is
u
sed in
al
m
os
t ev
er
y
mechanism in
realit
y
. And now that
we ar
e l
ivin
g in
mod
er
n
te
chnology
, you
will f
ind ge
ars
ev
er
yw
he
re
and
th
en peop
les
know exactly
w
hat we talking
about, and coming to schoo
l
they
are in a car
; e
eh..we h
ave g
ears. They
know
what is
speed and
what is goi
ng slow and
eeh
..
obv
iously when
it
comes
to the
bui
lding of
mech
an
isms as well, they know
how to eeh..basically engage
in
or emplo
y this
in
ee
h.
.f
uture inv
entions and so forth.
modern
technology
applies it
(gears
in
m
echanis
m
s.)
Le
arne
rs
emplo
y i
t
(princip
les of
gears
)
in
their
designs
O
k! W
e s
end l
ea
rners
out,
w
e as
k le
arners
to do
re
search,
to go and observ
e. So
when t
he
y
go out and they
do this,
yo
u
give th
em a project, the
y
need to do
this
research.
You give them
this knowledge
f
ir
st
. S
o th
at wh
en
th
ey
go out they are
observant, th
ey
h
ave a kn
owl
ed
ge
th
ey
have or they kn
ow what to
go a
nd look for specifically
and how to go
looking at
it.
Le
arne
rs
emplo
y i
t
(carefu
l
observation)
in
their
proje
ct
s/re
se
ar
ch
4
What else do
yo
u
know about the
design process that
yo
u
do not in
ten
d
Well obviously
eeh... tim
e is a constr
aint so what else do
I
know about the design process
that I
did
not intend the
learn
ers to...
. eeh.. obviously
u
hm
..! Obviously
eeh.. look
ing
at their
level, ob
viously
uhm..
later they are go
ing use gear
Types of
gears
these learners ar
e y
oung, th
ey
've been
in
troduces
to
drawing a
t t
he
b
eginning
. S
o
the
re ar
e
cer
tain
as
pects
that
yo
u
don't br
ing to them firs
t. They
need
to
hav
e an
holistic view of something fi
rst b
efore y
ou
can start
M
ach
in
e
drawing.
Th
e t
ech
ni
qu
e
of hidden detail
121
learn
ers to
know
ye
t?
sy
ste
m
s whe
n th
ey
are working
with the
ir Mini
PAT
. And
eeh... wha
tev
er
m
echanis
m
or s
tr
ucture
th
ey hav
e to
build
,
they
are going
to
emplo
y t
he
u
se of
ge
ar
s
in
it.
So,
obviously
that will b
e the types of
gears.
I
hav
en
't taught
the
m
that as
yet..That's a fo
llow
up act
ivi
ty
, a
nd then they're
going to
definite
ly
use one of
these
ty
pe
o
f gears to...
.eeh
build a
mechanism for
th
e next Mini
PA
T.
showing them. Now important t
o chi
ldren
is
wh
at we
wil
l
cal
l
ma
ch
in
e dr
awin
g wh
er
e yo
u
breaking up into parts.
Ok?
Childr
en do
n't need to know
that first especially
when the
y
ar
e
in
troduced
to
draw
ing. They
need to see
the whol
e p
ictur
e and
la
ter
as
the
y
progres
s,
then
we need
to bre
ak
it down
and t
ell
th
em
thi
s is what
this
is.
This is
a m
ech
anis
m
tha
t m
akes
th
e whol
e m
achin
e.
Get
p
art b
y
part so they
und
erstand. Now
in
most of these dr
awings
when we look at the whole draw
ing ther
e are many
things
ins
ide
the d
raw
ing tha
t n
eeds
to
b
roaden s
o
w
e u
se
th
e
te
chnique
o
f
hidde
n
de
tail
.
5
What knowledg
e
about learn
ers
thinking influ
en
ces
your
teaching
of
the
design process
?
W
ell,
ea
ch
child
eeh.
.
each
ch
ild th
in
ks
differ
en
tl
y.
Ea
ch
child is
unique i
n their own way
.
Eeh.. ther
e are differen
t
levels eeh
.. in
qu
estioning
tec
hniques; th
ere ar
e d
ifferen
t
leve
ls in whi
ch
th
ey
wil
l answ
er a question. A
nd
eeh.
. I
find
that
som
etim
es t
he
lesson that I
d
id using a power
point
pres
enta
tion,
ev
en a w
eaker
learn
er wil
l a
utom
ati
call
y
be
able to
pick
up s
ome things and
eeh... They
ar
e able to giv
e
their
view
point; they
expr
ess
themse
lve
s.
T
he
le
sson
becomes quite child fr
iendly
, an
d I find
th
at even the slow..
the so
ca
lled
slo
w
sh
y
child
, you
bring ou
t this ef
fect
iveness
in th
em
where
th
ey
want
to
be
pa
rt of
this
les
son
as
well
and
pa
rt
ic
ip
at
e.
Individual
differences
Ok! Over th
e p
er
iod of
tim
e,
we'
ve come to kno
w that
children are
less observant toda
y
(coughs) and as a
res
ult w
hen
y
ou
sp
eak to
th
em
ab
out a
..an ob
jec
t or a
machine or
whatever y
ou
want to
,
they don't have that
abilit
y
to se
e thi
ngs that the
teac
her would see.
S
o is
important that you bring this to
the atten
tion
of th
e ch
ild
so that when h
e goes to the s
cen
e to look at this again h
e
looks at it at.. fr
om a diff
er
ent view, from a diff
er
ent
viewpoint
Children are
les
s obs
er
van
t
6
W
hat other
fa
cto
r/s
influen
ce
the
wa
y
you
te
ach
the
design process
?
Uhm..! obviously
not all
schools have access to
resourc
es
and stuff lik
e th
at. So how
w
ould y
ou
go abou
t teaching a
lesson lik
e so in a school without
a PowerPoint pr
esentation;
a school th
at h
as no
access to electri
city
. Uhm! Well
basica
lly
you
wi
ll use
e
eh.
. ch
ild
friendl
y workshe
ets.
Eeh...
. the
te
ac
her m
ay
cre
ate
p
osters...
eeh...
sim
ple
things as g
ett
ing
childr
en to
b
ring
bottle caps, eeh
... finding
resources, ren
ewable
resources and stuff
at home that they
can
engag
e in
a
clas
s
ac
tiv
ity wh
ere
the
y
ar
e bui
ld
ing s
im
ple
gear
tra
ins
us
ing
bottl
e
caps
and
th
e con
cep
t and
th
e id
ea
of
thes
e s
ki
lls
a
re d
efinit
el
y
com
ing
. S
im
ple
things
like
a
coke
can.. You
know smashing it and
making a gear
s
ystem, eeh..
taking
simple co
rrugated
cardboa
rd from boxes
that they
can
use eeh...
for
a gear s
ys
tem... u
hm! So am sure methods like
this
c
an b
e em
pl
oy
ed
bas
ical
ly
in
an
y s
choo
l s
itua
tion.
Yes
!
Yes. From shopping centres
, fro
m the environment its
elf.
The
y
can
e
eh...
us
e this
to
cre
ate
... even
th
e t
ea
ch
er him
se
lf
or herself
c
an
ee
h... can
basi
cal
ly
p
re p
repar
e b
y
cutting
out
cardboard
and
making models o
f a
gear s
ys
tem th
at h
e or
she
can use to
eng
ag
e in
a lesson th
at the ch
ild knows
what to do
.
Availabi
lit
y
and or non-
availability of
re
sourc
e.
Improvisation.
RS: right!
Now today
y
ou must alter
y
our
teachin
g
strategy
to
cater
for the l
earner so that a
t the
end
of the
le
sson the
le
arne
r must be
able to understand what is
th
er
e.
A
nd
he
m
us
t be
abl
e to
no
w
go and
rel
at
e t
hat
information and use the info
rmation he is giv
en to
work
his workings when he's
doing h
is project.
(Learn
er
friendly
)
teaching
stra
te
gy
122
And also
you
ca
n do stim
ula
ting
act
iviti
es with
le
arners
where th
ey
a
re
e
eh... in
a
cl
ass a
ctivi
ty
the
y'r
e b
uilding
eeh... g
ear
s
ys
tems out of th
ings
that
the
y
w
ill fin
d in
the
neighbourhood themselves. Even
if they
ar
e goin
g to their
house they
m
ust
find som
ething;
bottle caps, eeh
... stuff l
ike
that
tha
t th
ey
c
an
basic
all
y
use
in ...
.
7
What do y
ou
do to
as
cert
ain
le
arner
s'
understanding
/confusion aroun
d
the d
esign pro
cess
?
: eeh..
body lan
guage
. W
hen w
hen
you
as
a
tea
cher wh
en
yo
u
are teaching
, y
ou
can
s
ee bo
dy
langu
age. Yo
u know
when a child do
esn't know. For
example if
y
ou ask a child
`Do y
ou
understand
?'
and y
ou
ju
st say
righ
t Jack did y
ou
understand
?'
an
d ther
e's th
is co
nfusion but they
will say
`
yes
Mam' y
ou und
er
stand
? And
you know as a teach
er its y
our
intuition
th
at
te
ll
s
yo
u
th
at
a
chi
ld
doesn't und
ers
tand and I
think I
as
a
tea
ch
er re
ad bod
y
lan
guage v
er
y
well. And I can
see when
a
chi
ld
is
confus
ed
. I c
an
s
ee wh
en
a ch
ild e
eh...
echoes the other
pupils sentime
nt in the sense that... In
order to
keep up
with him and
to
show that `hey
am not a
sl
ow
learn
er,
I k
now
w
hat is
hap
pening' and will y
es
I
understand, I kn
ow it. And as
a
teach
er y
ou
c
an s
ense th
at
and th
erefor
e I
will stop
the
lesson and I
wil
l dr
il
l. So
you
may
ask me th
e next qu
estion
`so what h
appens to the high-
fly
ers y
ou k
now they
work. Aren
't th
ey
gonn
a b
e bored
?
So
so
m
etim
es
y
ou
ca
n ev
en
cal
l thos
e high
fliers in
fr
ont of the
clas
s
to
exp
lain
to the
weak
er
lea
rners
. S
o
ever
yb
od
y is
engaged
and
they
are not bored
. Yea,
s
o the
high
er fl
iers
als
o
feel
the
y
ar
e no
t left
out.
Ch
eck
(obs
er
ve) bod
y
language
.
Te
ac
he
r's
intution
: Right!
Continu
ously
y
ou
do recaps on y
our
work and
you
qu
es
tion
th
em
at
diff
er
en
t p
oints to se
e
that
at that
point have you
understood wha
t we are
looking
,
what
we ar
e tr
ying to get through a
nd what I am tr
yi
ng
to br
ing
to y
ou, so th
at you are more
obs
ervant and
when
y
ou ar
e
observant,
y
ou
will b
e
able
to
pi
ck up
al
l th
e f
ina
l points
about ob
jects, m
achin
es. And
then when it comes to
drawing y
ou
hav
e th
at knowle
dg
e to
put it to
practice
because
y
ou've
seen i
t. Now y
ou
understand
whe
re i
t is
and what
it is,
th
en
you
can
put it down on p
aper
.
Que
stioning
(T
he
use
of
questions)
8
How do y
ou
ass
ess
learn
ers
work w
hen
it
com
es to
the
design process
?
OK! Ehm...
th
er
e ar
e s
o
man
y
ways
in
wh
ich
y
ou
can
asse
ss a le
arne
r's work.
N
um
ber 1 is
class ac
tiv
ities
eeh...when y
ou
give the class ac
ti
viti
es
, obv
ious
ly
w
e
are...
.
After th
e
child
fi
nishes the
c
lass
act
iviti
es,
we r
ec
apping
and
rem
arking th
e
ac
tivit
ies.
The
n th
ey
h
ave
follow up
activities
like Mini PATS
whe
re
we
te
ac
hers asse
ss the
m
.
The
y
are
given marks according to
a rubr
ic. And
the reason wh
y
I use
a rubri
c s
ys
tem
is
becaus
e e
eh...
a ch
ild
is
nev
er
disadvantaged
. Eeh... somehow o
r th
e o
ther...
e
ver
y ch
ild
eventu
all
y
ge
ts
to
pas
s. Anot
he
r way
of a
sse
ssing
the
m
is...
sometim
e
you pl
ay l
itt
le ga
mes
. Y
ou'll find
. that
c
hildr
en
love things like games. You kno
w
, when y
ou
see these things
like
test
, a
child
is bored
and
the
y
fee
l the
y
just h
ave
to
lea
rn
for the sake of...
but when y
ou
pl
ay
gam
es
like
as
I pl
ayed
battle
of
the
sex
es
...
: Ee
eh.
.!
chil
dren ar
e
com
peti
tive
. Y
ou
find th
at bo
ys
al
w
ay
s w
an
t t
o co
m
pete ag
ains
t gi
rls
, vi
ce
versa. And eeh
...
it somehow bri
ngs out. Ev
en the sh
y kids
So
m
an
y
way
s:
cl
ass
acti
viti
es;
follow up
acti
viti
es l
ike
Min
i PATS
wh
er
e we
te
ac
he
rs
asse
ss the
m
.
sometim
e you
play lit
tle
games
(Com
petition;
fun games like
quizz
es
)
Ok!
Now
there
are
many
w
ay
s in
w
hic
h y
ou
asse
ss
learn
ers' work.
L
ike
yesterd
ay's
lesson we
at
th
e
beginning
where we wer
e t
ea
chin
g them
dr
awing,
w
e
used
workshe
et
and we went aro
und
, I
went arou
nd to
see th
at
at
e
ach
s
tage
wheth
er th
e chi
ld und
ers
too
d what
he was
doin
g an
d as
si
st
anc
e was
g
iven
and r
eas
su
rance
was given to the child
to ma
ke
s
ur
e th
at
he und
ers
tands
.
And all
th
at.
No
w when
you
are
in a practical situation
yo
u
go to
th
e child and
y
ou wi
ll s
ee how
he is wor
king. If
he is off
line then y
ou will p
ut
hi
m
back un
to th
e
correc
t
line, show him exactly
how it wo
uld be done.
Many
way
s:
Works
he
et
s;
practicals
123
autom
ati
cal
ly
w
ant
to
answer.
C
ompeti
tion
is
something th
at
is an inborn thin
g in ever
y
human being
. And eeh... having
litt
le
fun games
like quizzes,
ee
h...
`Bat
tle
of
the
sexes'
you
know where... at th
e end of
the l
esson y
ou'r
e r
ecapping. So
basica
ll
y
you
ar
e
kill
ing
tw
o bird
s with one stone. You
recapp
ing th
e
les
son and a
t t
he
s
am
e tim
e th
e
les
son is
s
o
child
friend
ly
th
at b
ett
er und
er
standing takes
place. And if
yo
u
noticed
the less
on as well, y
ou
found th
e k
ids were eager
to answer
question. Ev
en I
ha
ve
some sh
y
kids w
ho never
even s
pe
ak.
You
won't ev
en h
ear
them
ut
ter
a
word, c
am
e in
the fron
t a
nd th
ey
w
ere
tr
ying
to
chal
lenge
th
e ot
her ha
lf.
Frequently asked questions
What is the purpose of this document?
This document is a comprehensive language preview including the title, table of contents, objectives and key themes, chapter summaries, and key words of an academic work. It serves to provide an overview and initial understanding of the research.
What are the key topics covered in this document?
The document primarily discusses grade 9 technology teachers' views of the design process and how these views influence their teaching. Key topics also include technology education, problem-solving, pedagogical content knowledge (PCK), curriculum development and implementation, teacher training, and reflective practice.
What does the table of contents include?
The table of contents lists the following chapters and sections: Acknowledgements, Abstract, Contents, Abbreviations, List of Tables and Graphs, Background and Educational Context, Literature Review and Theoretical Framework, Methodology, Presentation of findings and analysis, Conclusions and Recommendations, References, and various appendices detailing participants' informed consent, questionnaires, interviews, and analysis tables.
What conceptual frameworks were used in this document?
The study is framed using Shulman's Pedagogical Content Knowledge (PCK) model, Argyris and Schön's notions of "espoused theory" and "theory in use", and Singh-Pillay's concept of interface.
What data collection methods were used?
Data was collected using a combination of methods, including open-ended questionnaires, semi-structured interviews, lesson observations, and post-observation interviews.
What philosophical assumptions underpin this study?
The study is underpinned by an interpretivist paradigm and adopts a qualitative approach. This allows for an in-depth exploration of teachers' views and their influence on teaching practices.
What were the limitations of this study?
Limitations of the study include participant drop-out, time constraints that limited the number of lesson observations, and the fact that the case study findings cannot be generalized to all classrooms.
What were some core findings of this study?
The findings indicate that grade 9 technology teachers hold two core views of the design process: design process as problem-solving and design process as a step-by-step process that provides "comfort" to learners during problem-solving.
What implications does this study have?
The study's implications relate to reflective practice, professional development for teachers, resourcefulness, learner autonomy and creativity, collaborative learning, and problem-solving in technology education.
What are the recommendations of this study?
The study recommends retraining and reskilling technology teachers, focusing teacher education on the development of PCK, improving curriculum design and implementation, minimizing teacher interference during the design process, designing in collaborative groups, and promoting professional development.
Ende der Leseprobe aus 124 Seiten
- nach oben
- Arbeit zitieren
- Frank Ohemeng-Appiah (Autor:in), 2014, Teaching the design process in a grade 9 technology class, München, Page::Imprint:: GRINVerlagOHG, https://www.diplomarbeiten24.de/document/333938
-
-
-
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen. -
-
Laden Sie Ihre eigenen Arbeiten hoch! Geld verdienen und iPhone X gewinnen.
neugierig - aktuell - relevant
Entdecken Sie hilfreiche Tipps und Tricks rund ums Studium!
Entdecken Sie hilfreiche Tipps und Tricks rund ums Studium!
Ihre Hausarbeit / Abschlussarbeit:
- - Publikation als E-Book und Buch
- - Hohes Honorar auf die Verkäufe
- - Für Sie komplett kostenlos - mit ISBN
- - Es dauert nur 5 Minuten
- - Jede Arbeit findet Leser
- © GRIN Publishing GmbH.
- Alle Inhalte urheberrechtlich geschützt. Kopieren und verbreiten untersagt.
- info@grin.com
- AGB
- Open Publishing
Der GRIN Verlag hat sich seit 1998 auf die Veröffentlichung akademischer eBooks und Bücher spezialisiert. Der GRIN Verlag steht damit als erstes Unternehmen für User Generated Quality Content. Die Verlagsseiten GRIN.com, Hausarbeiten.de und Diplomarbeiten24 bieten für Hochschullehrer, Absolventen und Studenten die ideale Plattform, wissenschaftliche Texte wie Hausarbeiten, Referate, Bachelorarbeiten, Masterarbeiten, Diplomarbeiten, Dissertationen und wissenschaftliche Aufsätze einem breiten Publikum zu präsentieren.
Kostenfreie Veröffentlichung: Hausarbeit, Bachelorarbeit, Diplomarbeit, Dissertation, Masterarbeit, Interpretation oder Referat jetzt veröffentlichen!
Folgen Sie GRIN auf
- GRIN Verlag GmbH
-
- Nymphenburger Str. 86
- 80636
- Munich, Deutschland
- +49 89-550559-0
- +49 89-550559-10
- info@grin.com
-
Kommentare